sonecesiya Replacement Parts Kit for Dreame MOVA G30 Pro / G20 Master Robot Vacuums

1. Увод

This manual provides instructions for the installation, maintenance, and replacement of the sonecesiya accessory kit for Dreame MOVA G30 Pro and G20 Master robot vacuums. Regular replacement of these parts is crucial for maintaining your robot vacuum's cleaning efficiency and extending its lifespan.

2. Садржај пакета

The sonecesiya replacement parts kit includes the following components:

• 1x Главна ваљкаста четка
• 4x Сиде Брусхес
• 3x Филтери високе ефикасности
• 1x Торба за прашину

Слика 2.1: Завршеноview of the replacement parts kit, showing the main brush, side brush, filter, and dust bag with their approximate dimensions.

3. Компатибилност

This replacement parts kit is designed for perfect compatibility with Dreame MOVA G30 Pro и Dreame MOVA G20 Master robot vacuum cleaners. Using these parts ensures optimal performance and seamless integration with your device.

4. Упутства за инсталацију

Always power off your robot vacuum and disconnect it from any charging base before attempting to replace any parts.

4.1. Replacing the Main Roller Brush

1. Окрените роботски усисивач наопачке.
2. Locate the brush guard cover, usually secured by latches or screws. Open or remove it.
3. Пажљиво извадите стару главну ваљкасту четку.
4. Insert the new main roller brush, ensuring the ends align with the slots in the vacuum. The brush features a removable swivel head for easy cleaning and a precision opening for full compatibility.
5. Затворите или поново причврстите поклопац заштите четке.

Figure 4.1: The anti-tangle main roller brush, highlighting its precision opening for machine compatibility and removable swivel head for maintenance.

Слика 4.2: Детаљан view of the main roller brush, made of high-quality rubber designed to effectively pick up hair and scrape away floor stains.

4.2. Замена бочних четкица

1. Окрените роботски усисивач наопачке.
2. Locate the side brushes. They are typically held in place by a single screw.
3. Use a screwdriver to remove the screw and detach the old side brush.
4. Place a new side brush into position and secure it with the screw.

Figure 4.3: The three-arm side brush, designed with soft nylon bristles to effectively clean corners, edges, and crevices.

4.3. Replacing the High-Efficiency Filters

1. Отворите одељак за канту за прашину вашег роботског усисивача.
2. Уклоните канту за отпатке.
3. Locate the filter assembly within the dustbin. Remove the old filter.
4. Insert the new high-efficiency filter into the designated slot, ensuring it is seated correctly.
5. Вратите канту за прашину у роботски усисивач.

Figure 4.4: A close-up of the high-efficiency particulate filter, designed to capture 99.97% of particles as small as 0.3 microns.

4.4. Замена кесе за прашину

1. Open the dustbin compartment or the auto-empty station (if applicable) of your robot vacuum.
2. Carefully remove the full dust bag. The dust bag features a leak-proof push-pull handle for automatic closing upon removal, preventing dust leakage.
3. Insert a new dust bag, ensuring it is fully seated and the sealing mechanism is engaged.
4. Затворите одељак.

Figure 4.5: The dust bag, illustrating its leak-proof push-pull handle, automatic closing feature, rubber sealed loop, and good edge sealing for secure dust containment.

Слика 4.6: Пуна view of the dust bag, composed of ultra-fine melt-blown fibers and non-woven fabric for high filtration and reduced leak risk.

5. Учесталост одржавања и замене

Regular cleaning and timely replacement of parts are essential for optimal performance.

• Главна ваљкаста четка: Inspect weekly for tangled hair or debris. Clean as needed. Replace every 6-12 months, or sooner if wear is visible.
• Бочне четке: Inspect weekly for wear or damage. Clean as needed. Replace every 3-6 months, or sooner if bristles are bent or missing.
• High-Efficiency Filters: Tap clean weekly to remove dust. Do not wash with water. Replace every 2-3 months, or more frequently if you have pets or allergies.
• Врећа за прашину: Replace when full, or as indicated by your robot vacuum's app or indicator light.

6. Спецификације

КСНУМКС. Решавање проблема

• Смањена усисна снага: Check if the filter is clogged or installed incorrectly. Ensure the dust bag is not full and is properly sealed.
• Четке се не окрећу: Inspect the main roller brush and side brushes for tangled hair or debris. Ensure they are correctly installed and not obstructed.
• Необични звуци: Remove and re-install all brushes and the dustbin to ensure proper seating. Check for any foreign objects caught in the brushes or vacuum path.
• Делови не одговарају: Double-check the compatibility of the parts with your specific Dreame MOVA G30 Pro or G20 Master model. Refer to Section 3.

8. Гаранција и подршка

For any questions regarding the installation, maintenance, or performance of your sonecesiya replacement parts, please contact our customer support. Refer to your purchase documentation for specific warranty details and contact information.