CJ TECH 750mA аутоматски пуњач/одржавач батерије са пловком (модел 25305-EV) Упутство за употребу

Увод

This manual provides detailed instructions for the safe and effective use of your CJ TECH 750mA Automatic Float Battery Charger/Maintainer, Model 25305-EV. This device is designed to charge and maintain 6V and 12V lead-acid batteries, including AGM and GEL types, ensuring optimal battery performance and extending battery life. Please read this manual thoroughly before operation and retain it for future reference.

Безбедносне информације

УПОЗОРЕЊЕ: Прочитајте сва безбедносна упозорења и упутства. Непоштовање упозорења и упутстава може довести до струјног удара, пожара и/или озбиљних повреда.

• Always operate the charger in a well-ventilated area.
• Avoid sparks, flames, or smoking near the battery during charging, as batteries can produce explosive gases.
• Носите заштиту за очи и заштитну одећу када радите са батеријама.
• Disconnect the AC power supply before making or breaking connections to the battery.
• This charger is designed for 6V and 12V lead-acid batteries only. Do not use it to charge dry-cell batteries that are commonly used with home appliances, as these may burst and cause injury to persons and damage to property.
• Keep the charger and its components out of reach of children.
• The charger has an IP64 water-resistant rating, meaning it is protected from dust and splashing water. It is not designed to be submerged in water.
• Не користите пуњач ако је примио јак ударац, ако је испуштен или на други начин оштећен.

Садржај пакета

Проверите да ли су све ставке присутне у вашем пакету:

• CJ TECH 750mA Automatic Float Battery Charger/Maintainer Unit
• Батерија Цлamp Цоннецтор
• Конектор прстенастог терминала

Image: The CJ TECH 750mA Automatic Float Battery Charger unit shown with its two interchangeable connection accessories: battery clampс и прстенастих терминалних конектора.

Производ је завршенview

The CJ TECH 750mA Automatic Float Battery Charger/Maintainer is a compact and durable device designed for efficient battery care. It features automatic voltage detection and multiple safety protections.

ЛЕД индикатори

• ЦРВЕНА ЛЕД: Показује да се батерија тренутно пуни.
• ЗЕЛЕНА ЛЕД: Indicates the battery is fully charged and the charger is in maintenance (float) mode.

Слика: Детаљна view of the charger unit, highlighting the LED indicators for 'CHARGING' (red) and 'STORAGE' (green), along with input/output specifications.

Сетуп

1. Identify Battery Voltage: Determine if your battery is 6V or 12V. The charger automatically detects the voltage once connected.
2. Choose Connector: Select either the battery clamp connector or the ring terminal connector based on your battery's terminals.
3. Повежите се са батеријом:
   • Повежите РЕД positive (+) connector to the positive (+) battery terminal.
   • Повежите БЛАЦК negative (-) connector to the negative (-) battery terminal.

   Ensure a secure connection. Avoid touching the positive and negative connectors together.

4. Повежите се са наизменичним напајањем: Plug the charger's AC power cord into a standard 100-240V AC electrical outlet.

Image: The charger unit shown connected to an ATV battery using the battery clamp connectors, illustrating a typical setup scenario.

Упутство за употребу

The CJ TECH charger operates automatically once connected to a battery and power source.

1. Аутоматиц Волtagе Детекција: The charger will automatically detect if the connected battery is 6V or 12V. It requires an activation voltage of 4V for 6V batteries and 8V for 12V batteries to begin charging.
2. Режим пуњења: When the battery is charging, the ЦРВЕНА ЛЕД will illuminate. The charger delivers a constant current of 0.75A ±0.1A during this phase.
3. Maintenance (Float) Mode: Once the battery reaches full charge, the charger automatically switches to maintenance mode, and the ЗЕЛЕНА ЛЕД will illuminate. In this mode, the charger provides a small, continuous current to keep the battery at optimal charge without overcharging, preventing sulfation and extending battery life.
4. Искључивање: To disconnect the charger, first unplug it from the AC power outlet, then disconnect the negative (-) battery connector, followed by the positive (+) battery connector.

Image: An illustration showing the charger's connection diagram to a battery and AC power, alongside a table detailing input voltagе, оутпут волtage, charging current, battery types, activation voltage, and housing protection.

Одржавање

Proper maintenance ensures the longevity and reliable operation of your charger and batteries.

• Чишћење: Keep the charger unit clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
• Инспекција каблова: Regularly inspect the power cord and battery connectors for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
• Складиштење: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure cables are neatly coiled to prevent damage.
• Одржавање батерије: For optimal battery life, ensure battery terminals are clean and free of corrosion before connecting the charger.

Решавање проблема

Ако наиђете на проблеме са пуњачем, погледајте следеће уобичајене проблеме и решења:

Спецификације

• Број модела: 25305-ЕВ
• Улазни волtage: АЦ 100-240В, 50/60Хз
• Оутпут Волtage: 6V DC / 12V DC (Automatic Detection)
• Струја пуњења: 0.75А ±0.1А
• Врсте батерија: 6V/12V Lead-Acid Batteries (AGM, GEL)
• Activation Voltage: 4V for 6V batteries, 8V for 12V batteries
• Заштита становања: ИП64 водоотпоран
• Димензије производа: 3 к 3 к 5 инча
• Тежина артикла: 9.9 унци
• Сертификати: CETL / CE-EMC / CE-LVD / ROHS

Гаранција и подршка

For warranty information or technical support, please refer to the documentation included with your purchase or contact CJ TECH customer service. Keep your proof of purchase for warranty claims.