DOITOOL 38V6234331U9KUJYFP4DM

DOITOOL Ultrasonic Water Level Sensor Tank Gauge Liquid Level Meter User Manual

Model: 38V6234331U9KUJYFP4DM

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your DOITOOL Ultrasonic Water Level Sensor Tank Gauge Liquid Level Meter. This device is designed to monitor water levels and temperatures in outdoor tanks from the comfort of your indoor living space, offering a transmission range of up to 100 meters in open fields.

2. Карактеристике производа

  • Indoor temperature display (°C/°F)
  • Tank temperature display (°C/°F)
  • Water level displayed on a 10-bar graph
  • Records minimum and maximum indoor and tank temperatures
  • Adjustable tank level alarm modes (high/low)
  • Tank empty alert function
  • Time display (12/24hr format)
  • Time alarm mode
  • Tank level updated every 30 seconds or 3 minutes
  • Домет преноса: 100м (отворено поље)
  • Tank level/depth measurement range: 0.5m to 15m
  • Minimum air gap requirement: 0.5m
  • Receiver unit can be wall-mounted or placed on a surface using its stand

3. Садржај пакета

  • 1 x Liquid Level Meter Receiver Unit
  • 1 x Ultrasonic Transmitter Unit
  • Кориснички приручник (овај документ)

Note: Batteries are not included. The receiver unit typically requires 2x AA batteries, and the transmitter unit requires 6x AAA batteries.

4. Спецификације

СпецификацијаВалуе
Receiver Unit Dimensions10.5 x 9.3 x 2.5 цм
Receiver Unit Weight8 унци
МатеријалПластика
Tank Level/Depth Range0.5м до 15м
Minimum Air Gap0.5м
Распон преноса100м (отворено поље)
Power (Receiver)Батерије (нису укључене)
Снага (предајник)Батерије (нису укључене)

5. Подешавање и инсталација

5.1 Инсталација батерије

Before installation, insert the required batteries into both the receiver and transmitter units. Ensure correct polarity.

Back of the receiver unit with battery compartment open

слика: Позади view of the receiver unit, showing the battery compartment with the cover removed. This is where the receiver unit's batteries are inserted.

5.2 Transmitter Unit Installation

The transmitter unit is installed at the top of your water tank. Follow these guidelines for optimal performance:

  • Антена: Ensure the antenna is positioned for clear signal transmission.
  • Balance Bubble: Use the integrated balance bubble to ensure the transmitter is level for accurate readings.
  • Монтажа: Secure the transmitter using screws through the designated bracket.
  • Положај сензора: The ultrasonic sensor should have a clear path to the water surface. Ensure there is a minimum air gap of 0.5 meters (H1 height) between the sensor and the maximum water level.
  • Tank Opening: The tank opening for the sensor should be at least 20cm in diameter (Ø > 20CM) to prevent interference from tank walls.
Diagram showing transmitter components, installation sketch, and examples of wrong installation

слика: A detailed diagram illustrating the components of the transmitter unit (antenna, balance bubble, sensor), a setup sketch for proper installation on a tank, and visual examples of incorrect installation methods to avoid.

5.3 Receiver Unit Placement

The receiver unit can be placed indoors. It features a stand for desktop use or can be mounted on a wall using the integrated hooks. Position it in a location where the signal from the transmitter is strong and clear.

6. Упутство за употребу

The receiver unit displays various information on its screen, including indoor temperature, tank temperature, water level, and time. It features several buttons for configuration and viewинг дата.

Фронт view of the receiver unit display with buttons

слика: The front of the receiver unit, showing the digital display and control buttons: 'set', '+/max/min', '-/tank', and 'alarm'.

6.1 Приказ прекоview

  • T.ANK: Displays the water level in the tank, often represented by a 10-bar graph and a percentage.
  • °Ц/°Ф: Indicates temperature units.
  • Унутрашња температура: Shows the ambient temperature where the receiver is located.
  • Температура резервоара: Shows the temperature of the water in the tank.
  • ВРЕМЕ: Приказује тренутно време.

6.2 Функције дугмета

  • КОМПЛЕТ: Used to enter settings mode for time, alarms, and units. Press to cycle through settings.
  • +/MAX/MIN: У нормалном режиму притисните за view maximum and minimum recorded temperatures. In settings mode, use to increase values.
  • -/TANK: In normal mode, press to switch between tank level display units (meters/feet). In settings mode, use to decrease values.
  • АЛАРМНИ: Used to set or activate/deactivate various alarms (e.g., high/low water level, empty tank).

6.3 Подешавање времена и аларма

  1. Притисните тастер СЕТ button to enter time setting mode. Use + or - да подесите сате и минуте. Притисните СЕТ поново да потврдим.
  2. To set water level alarms, press the АЛАРМ дугме. Користите + or - to adjust the high or low water level thresholds. Press АЛАРМ again to confirm and activate.
  3. An audible alarm will sound when a set condition (e.g., tank empty, high/low level) is met.

7. Одржавање

  • Чишћење: Wipe both units with a soft, dry cloth. Do not use abrasive cleaners or immerse units in water.
  • Замена батерије: Replace batteries in both units when the low battery indicator appears on the receiver display. Ensure to use fresh batteries of the correct type and size.
  • Провера предајника: Periodically check the transmitter unit for any obstructions or debris that might interfere with the ultrasonic sensor's operation. Ensure it remains level.

КСНУМКС. Решавање проблема

  • No Reading on Receiver:
    • Проверите батерије у обе јединице и замените их ако је потребно.
    • Ensure both units are within the 100m transmission range and there are no significant obstructions.
    • Verify the transmitter is correctly installed and level.
  • Inaccurate Water Level:
    • Confirm the transmitter is level and the sensor has a clear path to the water.
    • Ensure the minimum air gap of 0.5m is maintained.
    • Check for debris or buildup on the sensor.
  • Temperature Readings Incorrect:
    • Ensure the units are not exposed to direct sunlight or extreme heat sources that could affect readings.

9. Безбедносне информације

  • Не покушавајте сами да растављате или поправљате уређај. За сервис се обратите квалификованом особљу.
  • Држите уређај даље од екстремних температура, директне сунчеве светлости и влаге.
  • Dispose of batteries according to local regulations. Do not mix old and new batteries or different types of batteries.
  • Овај уређај није играчка. Држати ван домашаја деце.

10. Гаранција и подршка

For warranty information and technical support, please refer to the retailer where you purchased the product or visit the official DOITOOL brand webсајт. Сачувајте доказ о куповини за потребе гаранције.

You can find more information about DOITOOL products at the DOITOOL Store.

© 2025 DOITOOL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.