Elac SUB1015 Powered Subwoofer User Manual

1. Увод

Thank you for choosing the Elac SUB1015 Powered Subwoofer. This high-performance subwoofer is engineered to deliver powerful and deep bass, enhancing your home audio experience. Featuring a 10-inch polypropylene cone, the SUB1015 handles low frequencies with clarity and precision. This manual provides essential information for proper setup, operation, and maintenance to ensure optimal performance and longevity of your subwoofer.

2. Садржај пакета

Молимо вас да проверите да ли су све ставке присутне у пакету:

• Elac SUB1015 Powered Subwoofer
• Грилле
• Кабл за напајање наизменичном струјом

3. Подешавање и везе

Proper setup is crucial for achieving the best sound quality from your subwoofer. Follow these steps for installation:

3.1 Постављање

The placement of your subwoofer significantly impacts its performance. Experiment with different locations in your room to find the optimal spot. Generally, placing the subwoofer in a corner can enhance bass output, but may also lead to boomy sound. Placing it along a wall or near your main speakers can provide a more balanced sound. Ensure there is adequate ventilation around the unit.

3.2 Повезивање сабвуфера

The SUB1015 offers both RCA line-level and speaker-level inputs for compatibility with various audio systems.

RCA Line-Level Input (Recommended)

If your AV receiver or pre-amplifier has a dedicated subwoofer output (often labeled LFE, Sub Out, or Pre-Out Sub), use an RCA cable to connect this output to the LINE INPUT (LFE) on the subwoofer's rear panel. This method typically provides the best performance and control.

Улаз на нивоу звучника

Ако ваш пријемник или amplifier does not have a dedicated subwoofer output, you can connect the subwoofer using the speaker-level inputs. Connect the speaker outputs from your ampдизалица до УЛАЗ ЗА НИВО ЗВУЧНИКА terminals on the subwoofer. Ensure correct polarity (positive to positive, negative to negative). You can then connect your main speakers to the ИЗЛАЗ ЗВУЧНИКА terminals on the subwoofer, or directly to your amplifier if your main speakers are full-range.

3.3 Прикључак за напајање

Once all audio connections are made, connect the supplied AC power cord to the subwoofer's power inlet and then to a suitable wall outlet. The subwoofer is designed for 230 Volts input.

4. Упутство за употребу

After connecting your subwoofer, use the controls on the rear panel to fine-tune its performance.

4.1 Контроле прекоview

• ВОЛУМЕ: Подешава укупни излазни ниво сабвуфера. Почните са ниским подешавањем и постепено повећавајте док се бас не уклопи беспрекорно са главним звучницима.
• LOW PASS (Hz): Controls the upper frequency limit of the subwoofer. This setting determines where the subwoofer takes over from your main speakers. A common starting point is 80 Hz, but adjust based on your main speakers' low-frequency capabilities.
• СНАГА: Овај прекидач има три положаја:
  • ВАН: Turns the subwoofer off.
  • НА: Keeps the subwoofer continuously on.
  • АУТО: The subwoofer will automatically turn on when an audio signal is detected and enter standby mode after a period of inactivity. This mode consumes less than 0.5W in standby.
• ФАЗА: Adjusts the phase of the subwoofer's output relative to your main speakers. Set to 0° or 180°. Experiment with both settings to find which provides the most coherent and impactful bass in your listening position.

КСНУМКС. Решавање проблема

If you encounter issues with your Elac SUB1015 subwoofer, refer to the following common problems and solutions:

• Нема звука:
  • Ensure the power cord is securely connected and the subwoofer is plugged into a live outlet.
  • Проверите ПОВЕР switch position. If set to AUTO, ensure an audio signal is present.
  • Verify all audio cables (RCA or speaker-level) are correctly and securely connected.
  • Повећајте ВОЛУМЕ control on the subwoofer.
  • Check your receiver/amplifier settings to ensure the subwoofer output is enabled and volume is not muted.
• Слаб или изобличен бас:
  • Подесите ВОЛУМЕ control on the subwoofer.
  • Подесите LOW PASS (Hz) control. If set too low, you might not hear enough bass.
  • Експериментишите са ФАЗА switch (0° or 180°) to see if it improves bass integration.
  • Check subwoofer placement. Moving it to a different location, especially closer to a wall or corner, might improve bass response.
  • Ensure speaker wires are connected with correct polarity (+ to +, - to -).
• Зујање или брујање:
  • Покушајте да укључите сабвуфер у другу електричну утичницу.
  • Уверите се да су сви аудио каблови правилно заштићени и да не иду паралелно са кабловима за напајање.
  • If using RCA connections, try a different RCA cable.
  • Disconnect all audio inputs from the subwoofer. If the hum disappears, the issue is likely with the source equipment or cabling.

6. Спецификације

Detailed technical specifications for the Elac SUB1015 Powered Subwoofer:

7. Одржавање

Да бисте одржали изглед и перформансе вашег сабвуфера:

• Чишћење: Use a soft, dry cloth to wipe the cabinet. Avoid using abrasive cleaners, waxes, or solvents.
• Пласман: Keep the subwoofer away from direct sunlight, heat sources, and excessive moisture.
• вентилација: Ensure the rear panel and any vents are not obstructed to allow for proper heat dissipation.

8. Производ је готовview Видео

Погледајте овај видео за визуелни прегледview of the Elac SUB1015 Powered Subwoofer and its key features.

9. Гаранција и подршка

The Elac SUB1015 Powered Subwoofer comes with a 1 година гаранције произвођача.

Информације о произвођачу:

ЕЛАЦ Америцас Инц.
1938 N. Batavia St. Suite K
Оранге, ЦА 92865

Importer Contact Information (India):

Kripa Electronics (india) Pvt.Ltd
Gala No 4 5 6, Building No. C, Shreeram Complex,
Village Dapoda, Bhiwandi Thane-421032