GODIYMODULES High Voltage DC Converter Module Board User Manual

1. Увод

This manual provides detailed instructions for the proper installation, operation, and maintenance of the GODIYMODULES High Voltage DC Converter Module Board. This module is designed to provide stable high voltage DC and filament voltage, suitable for applications such as powering Nixie tubes and Magic Eye tubes.

Слика 1.1: Одозго надоле view of the GODIYMODULES High Voltage DC Converter Module Board. This image shows the overall layout of the components, including capacitors, inductors, the DC input jack, and the terminal blocks for input and output connections.

2. Безбедносне информације

WARNING: This module generates high voltage. Improper handling can result in electric shock, injury, or damage to equipment. Always exercise extreme caution when working with high voltagе кола.

• Уверите се да је напајање искључено пре него што извршите било каква повезивања или подешавања.
• Do not touch any components on the board when power is applied.
• Use appropriate insulation and safety equipment.
• Verify all connections are correct before applying power.
• This module is intended for experienced electronics hobbyists and professionals.

3. Карактеристике

• Designed for Nixie and Magic Eye Tube anode and filament power supply.
• Подесива висока јачина звукаtage DC output.
• Dedicated 6.3V filament voltagе излаз.
• Compact board design.

4. Спецификације

5. Подешавање и везе

Follow these steps to correctly connect the High Voltage DC Converter Module Board to your system. Ensure all power is disconnected before proceeding.

5.1 Повезивање улазног напајања

The module accepts a DC input voltage between 9V and 12V. There are two methods for providing input power:

1. ДЦ прикључак за напајање: Use a DC power adapter with a 5.5*2.1 mm plug. The plug must be inner positive and outer negative.
2. Терминални блок: Connect your DC 9V-12V power supply to the designated input terminals on the green screw terminal block. Observe correct polarity.

Image 5.1: Connection diagram showing input and output terminals. The DC 9-12V input can be connected via the barrel jack (5.5*2.1mm, inner positive, outer negative) or the screw terminal block. The image also indicates the output voltage regulation potentiometer.

Image 5.2: Detailed connection diagram illustrating the input power options (DC 9-12V via barrel jack or screw terminals) and the output connections for 6.3V filament voltage, GND, and adjustable DC 150-280V. The output voltage adjustment potentiometer is also clearly marked.

5.2 Излазне везе

The module provides two main outputs via the green screw terminal block:

• DC 150V-280V Output: Ово је висока волtage output, adjustable via the onboard potentiometer. Connect the anode of your Nixie or Magic Eye tube to this output.
• DC 6.3V Output: This output provides 6.3V for tube filaments. Connect the filament of your tube to this output.
• ГНД: Common ground connection for both outputs.

Уверите се да су сви прикључци безбедни и правилно поларизовани пре него што укључите напајање.

6. Упутство за употребу

6.1 Укључивање

Once all connections are verified and secure, connect the DC 9V-12V power supply to the module. The module will immediately begin generating the output voltagес.

6.2 Adjusting High Voltagе Излаз

Висока волtage output (DC 150V-280V) is adjustable using the blue potentiometer located on the board. Use a small screwdriver to carefully turn the potentiometer:

• Окретање у смеру казаљке на сату воља повећати оутпут волtage.
• Окретање супротном смеру казаљке на сату воља смањити оутпут волtage.

Always use a multimeter to measure the output voltage while adjusting to prevent over-voltage damage to your connected components.

Слика 6.1: Врх view of the module, clearly showing the blue potentiometer used for adjusting the high voltagе излаз.

7. Одржавање

The GODIYMODULES High Voltage DC Converter Module Board is designed for reliable operation and requires minimal maintenance.

• Држите модул чистим и без прашине и прљавштине.
• Ensure adequate ventilation around the module to prevent overheating.
• Избегавајте излагање модула влази или екстремним температурама.
• Regularly inspect connections for looseness or corrosion.

КСНУМКС. Решавање проблема

• Но Оутпут Волtage:
  • Verify the input power supply is connected and providing 9V-12V DC.
  • Check the polarity of the input DC power plug (inner positive, outer negative).
  • Ensure all output connections are secure.
• Нетачна излазна јачина звукаtage:
  • За високу волtage output, adjust the potentiometer as described in Section 6.2.
  • Use a multimeter to accurately measure the output voltagес.
  • Уверите се да је улазна волtagе је стабилно и унутар наведеног опсега.
• Прегревање модула:
  • Ensure adequate airflow around the module.
  • Verify that the load connected to the outputs does not exceed the specified current limits (15mA for HV, 1500mA for 6.3V).

9. Подршка

For further assistance or technical inquiries, please refer to the seller's contact information on the product purchase page or visit the GODIYMODULES official support channels.