1. Увод
This manual provides essential information for the safe and efficient operation of your Aninerel 3600W Solar Inverter Charger, Model ANJ-3600W-LV. This device is a pure sine wave hybrid inverter designed to convert DC 48V to AC 110V, featuring a built-in 80A MPPT solar charge controller. It supports various battery types, including battery-less operation, and offers flexible charging and output modes for diverse energy requirements. Please read this manual thoroughly before installation and use.
Figure 1: Aninerel 3600W Solar Inverter Charger and Wi-Fi module.
2. Безбедносне информације
Please observe the following safety precautions to prevent injury and damage to the inverter or connected equipment.
- Инсталацију мора обавити квалификовано особље у складу са локалним електричним прописима.
- Ensure all power sources (PV, battery, AC grid) are disconnected before installation or maintenance.
- Не растављајте инвертор. Унутра нема делова које корисник може сам да поправи.
- Avoid exposing the inverter to rain, snow, liquids, or excessive dust.
- Осигурајте одговарајућу вентилацију око претварача да бисте спречили прегревање.
- Connect the inverter to a proper ground.
- Verify correct polarity when connecting batteries and PV arrays.
- This inverter is designed for single-phase (120V) output and does not support parallel operation for increased power or split-phase configurations.
Figure 2: Inverter Protection Features.
3. Карактеристике производа
The Aninerel 3600W Solar Inverter Charger offers a range of features for efficient power management:
- Све-у-једном дизајн: Combines a 3.6KW pure sine wave inverter, a 40A battery charger, and an 80A MPPT solar charge controller.
- High PV Input: Supports a maximum PV open circuit voltagе од 300ВДЦ.
- Компатибилност батерија: Compatible with 48V AGM/Sealed, Gel, Flooded, and Lithium batteries. Also supports battery-less operation.
- Flexible Charging Modes: Offers Hybrid Charging, Utility Priority Charging, Solar Priority Charging, and Only Solar Charging.
- Више излазних режима: Includes Utility Priority, Solar and Utility Hybrid, Solar Priority, and Inverter Priority.
- Time-Slot Function: Allows setting specific charging and discharging periods to optimize energy usage based on local tariffs.
- Комуникациони интерфејси: Supports CAN, USB, and RS485 for communication with compatible batteries and monitoring systems.
- Свеобухватна заштита: Features PV input over-voltage/current protection, AC input over-voltagе заштита, пренапон батеријеtagе заштита и заштита од преоптерећења.
Figure 3: Key Features of the Aninerel Hybrid Solar Inverter Charger.
4. Product Components and Ports
Familiarize yourself with the inverter's components and connection ports before installation.
Figure 4: Inverter Front and Side Panel Overview with Labeled Ports.
- Светло индикатора
- ЛЦД екран
- Touch Keys (ESC, UP, DOWN, ENTER)
- Заштита од преоптерећења
- Grounding Screw Hold
- АЦ излазни порт
- Wi-Fi Port (Optional)
- АЦ улазни порт
- RS485-2 Communication Port
- RS485-1 Communication Port
- УСБ комуникациони порт
- Вентилатор за хлађење
- ОН/ОФФ преклопни прекидач
- Суви контакт порт
- Current Sharing Port (for parallel module only, not supported by this model)
- Parallel Communication Port (for parallel module only, not supported by this model)
- Порт за батерију
- ПВ Порт
Напомена: This specific model (ANJ-3600W-LV) does not support parallel operation. Therefore, ports 15 and 16 are not applicable for this unit.
5. Подешавање и инсталација
Proper installation is crucial for the inverter's performance and safety.
5.1 Распакивање и преглед
- Open the package and verify all accessories are present as shown in Figure 5.
- Inspect the inverter for any physical damage. Contact your dealer immediately if any damage is found.
Figure 5: Product Accessories.
5.2 Монтажа претварача
- Choose a suitable location: indoors, protected from direct sunlight, rain, and dust.
- Ensure adequate clearance around the inverter for proper airflow (at least 20 cm on all sides).
- Mount the inverter vertically on a sturdy wall using appropriate fasteners.
5.3 Ожичење
Follow the wiring diagram carefully. All wiring should be done by a qualified electrician.
Figure 6: Typical Wiring Diagram.
- Повезивање батерије: Connect the 48V battery bank to the BAT+ and BAT- terminals. Ensure correct polarity. Recommended cable: 2 AWG/25 mm². Recommended fuse: 150A.
- Повезивање PV панела: Connect solar panels to the PV+ and PV- terminals. Max PV input power: 4000W. Max PV open circuit voltage: 300Vdc. MPPT voltage range: 80Vdc-300Vdc. Recommended cable: 10 AWG/6 mm². Connect solar modules in series.
- АЦ улазна веза: Connect the AC grid or generator to the AC Input port. Max AC input voltage: 300VAC. Max AC charging current: 80A. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
- Прикључак на излаз наизменичне струје: Connect your AC loads to the AC Output port. AC output power: 3600W. AC output voltage: 110V / 120V. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
- уземљење: Connect the grounding screw to a reliable earth ground.
Важно: Double-check all connections before powering on the inverter. Incorrect wiring can cause severe damage.
6. Упутство за употребу
Once installed, you can configure and operate your inverter using the LCD display and touch keys.
6.1 Почетно укључивање
- Ensure all wiring is secure and correct.
- Turn on the battery breaker.
- Turn on the PV array breaker (if connected).
- Turn on the AC input breaker (if connected).
- Flip the ON/OFF rocker switch on the inverter to the "ON" position.
- The LCD screen will light up, and the inverter will perform a self-test.
6.2 LCD екран и подешавања
Use the ESC, UP, DOWN, and ENTER buttons to navigate the LCD menu and adjust settings. Refer to the detailed manual for specific menu options.
6.3 Charging Priority Modes
These settings determine how your battery bank is charged from available power sources.
Figure 7: Charger Source Priority Options.
- Solar First AC Input Next: Solar panels prioritize charging the battery. AC input charges only if solar power is insufficient.
- Solar and AC Input Simultaneously: Both solar energy and utility power charge the battery bank at the same time.
- Само соларно: Solar energy is the exclusive charging source, regardless of AC input availability.
6.4 Output Source Priority Modes
These settings determine which power source the inverter uses to supply connected appliances.
Figure 8: Output Source Priority Options.
- Solar First: Prioritizes powering appliances from solar. If solar is insufficient, AC input will supplement.
- АЦ Фирст: Redirects AC input to power all appliances and uses solar and batteries only when AC input is unavailable.
- DC Priority (Solar and Battery First): Prioritizes solar power. If solar is insufficient, the battery bank supplies power. AC input powers only when battery voltage drops to a programmable value.
6.5 Battery Type Configuration
The inverter is compatible with various 48V battery types. Ensure the correct battery type is selected in the settings for optimal charging and discharge management.
Figure 9: Supported Battery Types.
- AGM/Sealed
- Гел
- Поплављена
- литијум
- User Mode (for custom battery parameters)
The inverter also supports battery-free operation. For lithium batteries, the shore power and photovoltaic can activate dormant lithium batteries.
7. Wi-Fi Monitoring
The inverter comes with an optional Wi-Fi module for remote monitoring.
Figure 10: Wi-Fi Monitoring Setup.
- Connect the Wi-Fi module to the designated Wi-Fi port on the inverter.
- Download the compatible monitoring application to your smartphone or tablet.
- Follow the app's instructions to register your device and connect it to your local Wi-Fi network.
- Once connected, you can monitor the inverter's status, energy production, and consumption in real-time from anywhere.
Напомена: Refer to the Wi-Fi module's separate instruction guide for detailed setup procedures, as app names and connection steps may vary.
8. Одржавање
Редовно одржавање осигурава дуготрајност и оптималне перформансе вашег инвертора.
- Чишћење: Периодично чистите спољашњост инвертора сувом, меком крпом. Уверите се да су вентилациони отвори без прашине и остатака.
- Везе: Годишње проверавајте све електричне спојеве на чврстоћу и знаке корозије.
- Окружење: Уверите се да радно окружење остаје у прописаним опсезима температуре и влажности.
- Инспекција батерије: If using lead-acid batteries, check electrolyte levels and terminal conditions as per battery manufacturer guidelines.
Always disconnect all power sources before performing any maintenance.
КСНУМКС. Решавање проблема
Овај одељак пружа решења за уобичајене проблеме. За проблеме који нису овде наведени, контактирајте корисничку подршку.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Inverter does not power on. | Нема везе са батеријом, низак ниво батеријеtage, ON/OFF switch off, blown fuse/breaker. | Проверите прикључке батерије и волtage. Ensure ON/OFF switch is on. Check and replace fuses/reset breakers. |
| Нема излаза наизменичне струје. | Overload, short circuit, low battery, inverter fault. | Reduce load. Check for short circuits in wiring. Check battery voltage. Consult LCD error codes. |
| PV not charging batteries. | No sunlight, PV array disconnected, incorrect PV voltage, MPPT controller fault. | Check sunlight conditions. Verify PV connections and voltage. Ensure PV input is within operating range. |
| Wi-Fi module not connecting. | Incorrect app, poor Wi-Fi signal, incorrect setup steps. | Ensure correct app is used. Check Wi-Fi signal strength. Re-follow Wi-Fi module setup instructions carefully. |
10. Спецификације
Key technical specifications for the Aninerel 3600W Solar Inverter Charger (Model ANJ-3600W-LV):
- Назив модела: ANJ-3600W-LV
- Називна излазна снага: 3600 Ваттс
- Максимална вршна снага: 7200 ВА
- Улазни волtagе (ДЦ): 48 Волтс
- Оутпут Волtagе (АЦ): 110V / 120V (Single Phase)
- Макс. ПВ Опен Цирцуит Волtage: 300 Вдц
- ПВ Оператинг Волtagе Распон: 80 - 300 Vdc
- МППТ Волtagе Распон: 90 - 260 Vdc
- Max. AC Charging Current: 80А
- Баттери Волtagе Распон: 40 - 60 Vdc
- Тежина артикла: 19.36 фунти
- Димензије пакета: 19.57 к 14.17 к 7.09 инча
- Произвођач: Shenzhen Anenji Energy Technology Co.,Ltd
11. Гаранција и подршка
For warranty information, technical assistance, or customer support, please contact Aninerel directly.
Figure 11: Aninerel Customer Support Contact Information.
- Емаил: anenji168@outlook.com
- Телефон: +86 188 0375 9233
- Support Hours (PDT): 9 AM - 6 PM
Please have your model number (ANJ-3600W-LV) and purchase date ready when contacting support.