RESTMO Sprinkler Timer (Model O-HT-1AW) Instruction Manual

Увод

This manual provides detailed instructions for the setup, programming, and operation of your RESTMO Sprinkler Timer, Model O-HT-1AW. Please read this manual thoroughly before use to ensure proper function and longevity of the device.

Image: RESTMO Sprinkler Timer, Model O-HT-1AW, connected to a garden faucet and hose, ready for use.

Кључне карактеристике

• 3 Independent Programs: Customize start times, durations (1 min - 4 hrs 59 mins), and frequencies (specific days) for diverse watering needs.
• Weekly Schedule Mode: Set exact days and times for irrigation, ideal for specific plant care or local watering regulations.
• Upgraded Waterproof & Durability: Seamless embedded screen prevents water ingress, and a rugged textured panel ensures longevity. IP55 waterproof protection.
• Режим одлагања кише: Suspend watering for 24, 48, or 72 hours without losing programmed settings.
• Ручни режим заливања: Initiate immediate watering from 1 minute to 299 minutes.
• Лако подешавање: Oversized dial and large LCD screen for intuitive programming and monitoring.
• Компатибилност: Single outlet with solenoid valve, fitting for 3/4" hose and faucet. Operates with 8-120 psi water pressure.

Image: Visual representation of the timer's main features, including timed watering, manual control, rain delay, and waterproof design.

Водич за подешавање

1. Инсталација батерије

The timer requires 2 x AAA Alkaline Batteries (not included). Ensure your hands are dry when handling batteries and the battery compartment to prevent moisture ingress.

1. Open the waterproof battery compartment cover located on the back of the timer.
2. Insert two fresh AAA alkaline batteries, observing the correct polarity (+/-).
3. Securely close the battery compartment cover to maintain its waterproof seal.

2. Connecting the Timer

Connect the timer to your outdoor faucet and garden hose.

1. Screw the timer's inlet (top connection) onto a standard 3/4" outdoor faucet. Ensure the built-in metal filter is in place to prevent debris from entering the timer.
2. Screw your garden hose onto the timer's outlet (bottom connection).
3. Tighten all connections by hand to prevent leaks. Do not overtighten.

Image: The sprinkler timer installed on a faucet with hoses attached, illustrating proper connection.

3. Подешавање сата

1. Окрените точкић на СЕТ ЦЛОЦК.
2. Користите + / - buttons to set the current time (hour and minute).
3. Притисните тастер OK button to switch between setting the hour and minute.
4. Turn the dial to another position (e.g., ON) to save the changes.

Програмирање распореда заливања

The timer features three independent programs (P1, P2, P3). Each program can be set with a unique start time, duration, and watering days.

Слика: Оверview of the three independent programming options (P1, P2, P3) and their customizable settings.

Setting Program 1 (P1)

1. Окрените точкић на P1.
2. Користите + / - дугмад за подешавање ВРЕМЕ ПОЧЕТКА. Притисните OK to confirm and move to КОЛИКО ДУГО.
3. Користите + / - buttons to set the watering КОЛИКО ДУГО (duration). Press OK to confirm and move to WATER DAY.
4. Користите + button to select desired watering days and the - button to unselect days.
5. Turn the dial to another position (e.g., ON) to save the changes.

Setting Program 2 (P2)

Follow the same steps as Program 1, but turn the dial to P2 to set its independent schedule.

Setting Program 3 (P3)

Follow the same steps as Program 1, but turn the dial to P3 to set its independent schedule. To turn P3 off, keep pressing the - button until 'OFF' is displayed for the watering days.

Оперативни режими

Аутоматско заливање

Once programs are set, turn the dial to ON to activate automatic watering. The LCD screen will flash between the next watering start time and the current time when watering is OFF. When watering is ON, the LCD screen displays the remaining time of the current watering program.

Ручно заливање

To initiate manual watering:

1. With the dial at ON and the timer not actively watering, long press the OK MANUAL дугме на 3 секунди.
2. Користите + / - buttons to select the desired watering duration (1 min to 299 mins).
3. Притисните тастер OK button to start manual watering.
4. To cancel manual watering, turn the dial to ОФФ а затим назад на ON.

Киша одложи заливање

To temporarily pause scheduled watering due to rain:

1. With the dial at ON and the timer not actively watering, long press the ДЕЛАИ дугме на 3 секунди.
2. Користите + / - buttons to select a delay of 24, 48, or 72 hours.
3. Притисните тастер OK button or wait for 3 seconds for the rain delay to start automatically.
4. To cancel rain delay, turn the dial to ОФФ а затим назад на ON.

Image: The timer's display showing the rain delay function, allowing selection of 24, 48, or 72-hour delays.

Одржавање

Cleaning the Filter Washer

The timer includes a built-in metal filter to prevent debris from entering the system. Periodically check and clean this filter to ensure optimal water flow and prevent blockages.

1. Искључите довод воде до славине.
2. Одврните тајмер са славине.
3. Remove the filter washer from the inlet.
4. Исперите филтер под млазом воде да бисте уклонили накупљене остатке.
5. Reinsert the clean filter washer and reattach the timer to the faucet.

Зимско складиште

During freezing temperatures, remove the timer from the faucet and store it indoors to prevent damage from ice expansion.

Решавање проблема

• Нема протока воде: Check if the faucet is fully open. Ensure the filter washer is clean and not blocked. Verify that the timer is set to ON and a program is active or manual watering is engaged.
• Timer not turning on/off: Check battery levels and replace if necessary. Ensure the battery compartment is securely closed. Verify that programs are correctly set and the dial is on ON.
• Цурење из прикључака: Ensure all connections are hand-tightened. Check if rubber washers are properly seated and not damaged. Replace washers if worn.
• Проблеми са приказом: If the LCD screen is dim or unresponsive, replace batteries. If water intrusion is suspected, ensure the battery compartment is sealed and the screen is not damaged.

Спецификације

Image: Detailed diagram illustrating the timer's dimensions and key technical specifications.

Гаранција и подршка

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo webсајту. Сачувајте рачун о куповини за гаранције.