AUSOM Leopard DT1 Pro Electric Scooter User Manual

Увод

The AUSOM Leopard DT1 Pro Electric Scooter is designed for adults seeking powerful performance, advanced safety features, and supreme riding comfort. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Key features include dual 1000W motors for speeds up to 41 mph, an 18.2Ah battery offering up to 47 miles range, dual braking systems (ZOOM hydraulic disc brakes and EABS), SUV-level swingarm suspension, a smart LCD display, and a comprehensive lighting system with turn signals.

Безбедносне информације

WARNING: Always wear a helmet and appropriate safety gear when riding. Obey all local traffic laws and regulations. Do not ride in wet conditions or on slippery surfaces. Always perform a pre-ride inspection.

• Familiarize yourself with all controls and features before riding.
• Уверите се да су сви вијци и причвршћивачи затегнути пре сваке вожње.
• Редовно проверавајте притисак у гумама.
• Не прекорачујте максималну дозвољену тежину од 143 фунте.
• Avoid riding in heavy rain or through deep puddles to prevent damage to electrical components.
• Use turn signals and lights to enhance visibility, especially at night.
• Одржавајте безбедно растојање од других возила и пешака.

Садржај пакета

Upon opening the box, verify that all components are present and undamaged. The standard package includes:

• AUSOM Leopard DT1 Pro Electric Scooter (main unit)
• Упутство за употребу
• Повер Адаптер
• Повер Цабле
• Комплет алата
• NFC Card (for security lock system)

Подешавање и монтажа

Follow these steps to assemble your AUSOM Leopard DT1 Pro Electric Scooter:

1. Расклопите стабљику: Carefully lift the scooter from its packaging. Open the kickstand to allow the scooter to stand upright. Unfold the stem until it locks securely into place.
   

   Image: The AUSOM Leopard DT1 Pro Electric Scooter shown both folded for transport and fully unfolded for riding, highlighting its compact design and readiness for use.

2. Причврстите управљач: Place the handlebar onto the top of the stem. Ensure the clip is centered.
3. Install the Display: Position the smart LCD display on the handlebar. Align the four M5 screws with the screw holes in the stem clip and tighten them securely to fasten the display and handlebar.
4. Attach Motor Nut Caps: Secure the four motor nut caps to the front and rear motor nuts as shown in the assembly video.

Упутство за употребу

Power On/Off and Security Lock

To power on the scooter, press the power switch for 3 seconds. The LCD display will show "Card". Place the NFC card over the NFC detection area on the display to activate the scooter. The display will light up, indicating it's ready for use. To power off, press and hold the power button for 3 seconds.

Adjusting Speed Modes

The scooter features three riding modes: ECO, SPORT, and RACE. After exiting PARK mode (by pressing the Plus button), use the Plus (+) or Minus (-) buttons on the control panel to switch between these modes. Each mode offers different speed and power characteristics:

• ЕКО режим: For maximum range and energy efficiency.
• СПОРТ режим: Balanced performance for daily commuting.
• RACE Mode: Full power and speed, reaching up to 41 mph.

Image: A rider demonstrating the power and speed of the AUSOM Leopard DT1 Pro, highlighting its dual 1000W motors and maximum speed capabilities across different modes.

Lighting System and Turn Signals

The scooter is equipped with a comprehensive lighting system for enhanced visibility and safety:

• фар: Press the Plus button for 3 seconds to turn the ultra-bright front headlight on or off.
• Brake and Tail Lights: Safety brake and warning tail lights activate automatically when braking.
• Показивачи правца: Push the turn signal light switch to the left or right to activate the corresponding turn signal. Push the switch in the same direction again to turn it off.

Image: The AUSOM Leopard DT1 Pro Electric Scooter with its front headlight and side lights illuminated, demonstrating its visibility features for night riding.

Хорн

Press the horn button located on the left handlebar to alert others of your presence.

Једноструки/двоструки моторни режим

Short press the DDM button to switch between Single and Dual Motor modes, allowing for power conservation or full power as needed.

Склапање и транспорт

The scooter is designed for easy folding and transport. Locate the folding mechanism on the stem, release the latch, and fold the stem down towards the deck until it locks. This compact design makes it convenient for storage or carrying.

Image: A visual guide illustrating the simple steps required to fold the AUSOM Leopard DT1 Pro Electric Scooter, making it compact for storage or transportation.

Пуњење

The scooter features dual charging inputs, allowing for a full charge in approximately 4-5 hours. It also has dual charging outputs (USB-B and Type-C) to power your devices on the go.

Image: The AUSOM Leopard DT1 Pro Electric Scooter with a graphic overlay illustrating its impressive battery capacity and maximum range of up to 47 miles.

Riding Performance and Features

The AUSOM Leopard DT1 Pro is built for diverse terrains and high performance:

• Два мотора од 1000 W: Provides exceptional power and acceleration for various riding conditions.
• Dual Braking Systems: Equipped with ZOOM hydraulic disc brakes and an EABS system for precise and responsive stopping power.
• SUV-Level Suspension: Features a swingarm design that effectively absorbs shocks and vibrations, ensuring a smooth ride even on rough terrain.
• 10"x3" Off-Road Tires: Thick pneumatic tires designed to effortlessly navigate various obstacles and provide excellent grip.

Одржавање

Regular maintenance is crucial for the longevity and safe operation of your scooter:

• Чишћење: Обришите скутер огласомamp крпу после сваке вожње. Избегавајте директно прање електричних компоненти млазевима воде под високим притиском.
• гуме: Check tire pressure weekly. Recommended pressure is typically found on the tire sidewall. Inspect tires for wear and tear.
• кочнице: Regularly check brake lever tension and brake pad wear. Adjust or replace as needed.
• батерија: Charge the battery fully after each use, especially if storing for an extended period. Do not allow the battery to fully discharge.
• Причвршћивачи: Periodically check and tighten all screws and bolts, especially those on the handlebars, stem, and wheels.
• Складиштење: Чувајте скутер на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.

Решавање проблема

Ево неких уобичајених проблема и њихових могућих решења:

If the issue persists after attempting these solutions, please contact AUSOM customer support for further assistance.

Спецификације

Гаранција и подршка

The AUSOM Leopard DT1 Pro Electric Scooter comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, replacement parts, or any inquiries not covered in this manual, please contact AUSOM customer service through their official webсајт или продавницу где сте купили производ.

За више информација посетите званичник AUSOM Store on Amazon.