CYCPLUS Tiny Pump AS2 Electric Bicycle Pump Instruction Manual

1. Производ је готовview

The CYCPLUS Tiny Pump AS2 is a portable, ultra-mini electric bicycle pump designed for convenient and rapid tire inflation. Its compact size and lightweight aluminum construction make it an ideal companion for cyclists. This pump features a Type-C rechargeable battery and is capable of reaching a maximum air pressure of 100 PSI.

The CYCPLUS Tiny Pump AS2, showcasinг његов компактни дизајн.

2. Кључне карактеристике

• Џепна величина и преносивост: Weighing only 3.42 oz (97g) and measuring 1.71 x 1.1 x 2.52 inches, this pump is designed for easy portability, fitting into a pocket or attaching to a backpack.
• Моћна инфлација: Achieves a maximum air pressure of 100 PSI with a wind speed of 5L/min, capable of inflating a 700*25C tire to 80 PSI in approximately 80 seconds.
• Пуњива батерија: Fully charges in about 20 minutes and can inflate two 700*25C tires from 0 to 80 PSI on a single charge. Features a low standby current for extended battery life.
• Компатибилност са двоструким млазницама: Compatible with both Schrader and Presta valves, offering versatility for various bicycle types.
• Издржљив и сигуран: Constructed from aluminum, designed for durability and capable of inflating over 200 tires throughout its lifespan.

Компактан и лаган дизајн за лак транспорт.

Demonstration of the pump's fast inflation capability.

3. Листа паковања

The CYCPLUS Tiny Pump AS2 package includes the following items:

• Inflator (CYCPLUS Tiny Pump AS2)
• Кабл за пуњење типа Ц
• Упутство за употребу
• Пацкинг Бок
• Силицоне Цасе
• Pillar (for Schrader valve assembly)
• Seal Part (for valve assembly)
• Продужно црево
• Splash-proof Pouch

All items included in the CYCPLUS Tiny Pump AS2 package.

4. Setup and Valve Compatibility

The CYCPLUS Tiny Pump AS2 is compatible with both Presta and Schrader valves. The inflator is ready for Presta valves right out of the box. For Schrader valves, a simple reassembly of the internal components is required.

4.1. Identifying Valve Types

• Преста вентил: Thinner, with a small nut at the top that needs to be loosened before inflation.
• Сцһрадер вентил: Wider, similar to car tire valves, with a pin in the center.

Visual guide for Presta and Schrader valve types and pump assembly.

4.2. Assembling for Schrader Valve

To use the pump with a Schrader valve, you need to install the included pillar and seal part. Follow these steps:

1. Remove the nozzle cap from the inflator.
2. Insert the pillar into the nozzle opening.
3. Place the seal part with the big hole facing inwards onto the pillar.
4. Reattach the nozzle cap, ensuring it is securely fastened.

For a visual demonstration of valve assembly and usage, please refer to the official usage guidance video below:

5. Упутство за употребу

The CYCPLUS Tiny Pump AS2 features a simple one-button operation for inflation.

5.1. Процес инфлације

1. Ensure the pump is adequately charged (refer to battery indicator below).
2. For Presta valves, loosen the nut at the top of the valve stem. For Schrader valves, ensure the pump is correctly assembled.
3. Firmly connect the pump's nozzle to the tire valve.
4. Double-click the power button to start the inflation. The pump will begin to inflate the tire.
5. Monitor the tire pressure manually by feel, as this model does not have a pressure display.
6. Once the desired pressure is reached, single-click the power button to stop the inflation.
7. Carefully disconnect the pump from the tire valve. For Presta valves, tighten the nut.

Напомена: Always start the pump before connecting it to the nozzle if the tire is completely flat (non-flat tire start before connecting to the nozzle).

5.2. Индикатор батерије

The pump features a simple LED battery indicator:

• зелено светло: 80% -100% пуњења
• наранџасто светло: 50% -80% пуњења
• црвено светло: 0-50% напуњености (ускоро допуна)

Battery indicator guide for the CYCPLUS Tiny Pump.

6. Подаци о учинку

The following table provides approximate inflation times and available uses per full charge for various tire types. These are experimental data from CYCPLUS labs and are for reference only.

Detailed performance data for the pump.

7. Одржавање

• Пуњење: Charge the pump fully after each use or when the red battery indicator light is on. Use the provided Type-C cable. A full charge takes approximately 20 minutes.
• Складиштење: Чувајте пумпу на хладном и сувом месту даље од директне сунчеве светлости и екстремних температура.
• Чишћење: Обришите пумпу меком, сувом крпом. Не користите јаке хемикалије или абразивна средства за чишћење.
• Valve Components: Periodically check the pillar and seal part for wear and tear, especially if you frequently switch between valve types. Replace if damaged.

КСНУМКС. Решавање проблема

9. Спецификације

Comparison of CYCPLUS Tiny E-pump AS2 series models.

10. Гаранција и подршка

All CYCPLUS products come with a two-year warranty. If you encounter any issues while using the product within this period, please contact customer service for repair or replacement.

For further assistance, please visit the official CYCPLUS store or contact their customer service directly.

• Гарантни период: Две године од датума куповине.
• Контакт: Refer to your product packaging or the official CYCPLUS webсајт за најновије контакт информације.