DIGITEN THT1032 Temperature and Humidity Controller with Timer User Manual

1. Увод

The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.

2. Кључне карактеристике

• Plug & Play Operation: Simple setup with intuitive buttons for quick configuration.
• Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
• Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
• Велики ЛЦД екран: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
• Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.

3. Садржај пакета

• DIGITEN THT1032 Controller Unit
• Температуре Пробе
• Сонда за влажност
• Упутство за употребу

4. Производ је готовview

The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.

Слика 1: Предња страна view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.

4.1. Контролна табла и екран

The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).

Слика 2: Детаљно view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.

• СЕТ дугме: Used to select an outlet for configuration or confirm settings.
• Дугме МОДЕ: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
• Дугме горе (▲): Increases values or navigates menu options.
• Дугме надоле (▼): Decreases values or navigates menu options.
• ОУТ1: Temperature controlled outlet.
• ОУТ2: Humidity controlled outlet.
• ОУТ3: Timer controlled outlet.

4.2. Сонде

The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.

Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.

5. Почетно подешавање

1. Повежите сонде: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
2. Пласман: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
3. Укључено: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
4. Повежите уређаје: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.

6. Упутство за употребу

6.1. Setting Temperature Control (OUT1)

1. Притисните тастер СЕТ button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
2. Користите Горе (▲) or Доле (▼) дугмад за подешавање жељене циљне температуре.
3. Притисните МОДЕ to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
4. Притисните СЕТ to confirm the temperature and mode.
5. To set the temperature differential (hysteresis), press and hold СЕТ for a few seconds when OUT1 is selected. Use Горе/Доле to adjust the difference between the set point and when the device turns on/off. Press СЕТ потврдити.

6.2. Setting Humidity Control (OUT2)

1. Притисните тастер СЕТ button repeatedly until OUT2 is selected.
2. Користите Горе (▲) or Доле (▼) buttons to adjust the desired target humidity percentage.
3. Притисните МОДЕ to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
4. Притисните СЕТ to confirm the humidity and mode.
5. To set the humidity differential, press and hold СЕТ for a few seconds when OUT2 is selected. Use Горе/Доле да подесите. Притисните СЕТ потврдити.

6.3. Setting Timer Control (OUT3)

1. Притисните тастер СЕТ button repeatedly until OUT3 is selected.
2. Притисните МОДЕ to enter the timer programming interface.
3. Користите Горе (▲) or Доле (▼) to set the ON time (hour and minute). Press СЕТ да бисте прешли на следећу поставку.
4. Set the OFF time (hour and minute) using Горе/Доле и СЕТ.
5. The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
6. Притисните СЕТ да бисте сачували и изашли из подешавања тајмера.

6.4. Промена јединица температуре (°C/°F)

To switch between Celsius and Fahrenheit, press and hold the Горе (▲) button for approximately 3 seconds. The display will change accordingly.

7. Одржавање

• Чишћење: Обришите контролну јединицу меком, сувом крпом. Не користите абразивна средства за чишћење нити потапајте јединицу у воду.
• Брига о сонди: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
• Складиштење: Када се не користи, чувајте контролер на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.

КСНУМКС. Решавање проблема

9. Техничке спецификације

10. Гаранција и корисничка подршка

DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webсајт за контакт информације.

Молимо вас да сачувате доказ о куповини за потребе гарантног сервиса.