1. Увод
This manual provides detailed instructions for the installation, operation, and maintenance of your SENSTREE Dual Probe Temperature & Humidity Controller, Model THT1032-ZJ. This device is designed to precisely monitor and control both temperature and humidity in various environments, utilizing independent sensors for optimal performance. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Безбедносне информације
Придржавајте се следећих мера безбедности како бисте спречили повреде или оштећење уређаја:
- Уверите се да је напајање волtage matches the device's specifications (240 Volts AC).
- Do not immerse the controller unit in water or expose it to excessive moisture. The probes are water-resistant, but the main unit is not.
- Avoid exceeding the maximum rated current of 10 Amps per outlet. Overloading can cause damage or fire.
- Држите уређај ван домашаја деце.
- Не покушавајте сами да растављате или поправљате уређај. За сервис контактирајте квалификовано особље.
- Обезбедите одговарајућу вентилацију око контролера како бисте спречили прегревање.
3. Производ је готовview
3.1 Компоненте
The SENSTREE Dual Probe Temperature & Humidity Controller consists of the main control unit, a temperature probe, and a humidity probe.
Figure 1: Main unit of the SENSTREE Dual Probe Temperature & Humidity Controller, showing the display, control buttons, three power outlets, and connected temperature and humidity probes.
3.2 Кључне карактеристике
- Dual-Probe Design: Features separate temperature and humidity sensors for independent, precise monitoring and control.
- Двоструки екран: Clear LCD screen simultaneously shows real-time temperature (°F/°C) and humidity (%).
- Широка примена: Suitable for greenhouses, reptile terrariums, grow tents, wine cellars, and storage rooms. Compatible with humidifiers, dehumidifiers, heaters, AC units, and fans.
- Прецизно инжењерство: High-accuracy sensors and advanced calibration ensure reliable performance. Alerts for out-of-range conditions protect sensitive environments.
- Пријатан за кориснике: Simple setup and intuitive buttons for setting desired ranges and automatic device activation.
4. Подешавање
4.1 Распакивање
Carefully remove the controller and its components from the packaging. Verify that all parts are present and undamaged.
4.2 Монтажа контролера
The controller features a hanging design for convenient placement.
Figure 2: The back of the controller unit features keyhole slots for wall mounting using screws (not included).
- Select a suitable location for the controller, ensuring it is away from direct heat sources, moisture, and vibrations.
- Use appropriate screws (not supplied) to secure the controller to a wall or vertical surface using the keyhole slots on the back.
4.3 Повезивање сонди
The controller comes with two independent probes: one for temperature and one for humidity.
Figure 3: The separate temperature probe (left) and humidity probe (right) for precise environmental measurements.
- Plug the temperature probe into the designated port on the controller.
- Plug the humidity probe into its designated port.
- Position the probes in the area where you need to monitor temperature and humidity. Ensure they are not obstructed and are representative of the environment you wish to control. The sensor length is approximately 1.4 meters (55.12 inches).
4.4 Укључивање
- Plug the controller's power cord into a standard 240V AC electrical outlet.
- The LCD display will illuminate, showing current temperature and humidity readings.
5. Упутство за употребу
5.1 Приказ прекоview
The LCD screen provides real-time information and settings.
Figure 4: The controller's backlit LCD display showing temperature (OUT1), humidity (OUT2), and a clock/timer (OUT3).
- ОУТ1: Displays current temperature and heating/cooling status.
- ОУТ2: Displays current humidity and humidification/dehumidification status.
- ОУТ3: Displays current time or timer status.
5.2 Подешавање температуре и влажности
To set your desired temperature and humidity ranges:
- Притисните тастер СЕТ button once to enter temperature setting mode. The temperature display will flash.
- Користите UP и ДОВН дугмади са стрелицама да бисте подесили жељену температуру.
- Притисните СЕТ again to confirm the temperature and move to the temperature differential setting (hysteresis). Adjust as needed.
- Притисните СЕТ a third time to enter humidity setting mode. The humidity display will flash.
- Користите UP и ДОВН arrow buttons to adjust the desired humidity set point.
- Притисните СЕТ a fourth time to confirm the humidity and move to the humidity differential setting. Adjust as needed.
- Притисните СЕТ one last time or wait a few seconds for the settings to save automatically and return to normal display.
5.3 Избор режима
The controller supports various operating modes for temperature and humidity control.
- Притисните и држите МОДЕ button for 3 seconds to enter mode selection.
- Користите UP и ДОВН arrow buttons to cycle through available modes (e.g., Heating, Cooling, Humidification, Dehumidification, Timer).
- Притисните МОДЕ поново да потврдите свој избор.
5.4 Функција тајмера
The OUT3 port can be configured as a timer. Refer to the detailed instructions in the full manual for specific timer programming steps.
6. Одржавање
To ensure the longevity and accuracy of your controller:
- Чишћење: Обришите главну јединицу меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
- Брига о сонди: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables.
- Складиштење: If storing the device for an extended period, disconnect it from power and store it in a dry, cool place.
КСНУМКС. Решавање проблема
Погледајте табелу испод за уобичајене проблеме и њихова решења.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Екран је празан | No power; power cord loose | Проверите прикључак за напајање; уверите се да је утичница функционална. |
| Нетачна очитавања | Probes dirty or damaged; incorrect placement | Clean probes; reposition probes away from drafts or direct heat/moisture; check for physical damage. |
| Connected device not activating | Incorrect set points; device not plugged in; controller in wrong mode | Verify set points and differential; ensure device is properly plugged into the correct outlet; check operating mode. |
| Порука о грешци на екрану | Probe malfunction; internal error | Disconnect and reconnect probes; power cycle the unit. If the error persists, contact customer support. |
8. Спецификације
Technical specifications for the SENSTREE Dual Probe Temperature & Humidity Controller:
| Феатуре | Спецификација |
|---|---|
| Број модела | THT1032-ZJ |
| Волtage | 240 волти (АЦ) |
| Називна струја | 15A max (per plug, check product label for exact rating) |
| Опсег контроле температуре | -10°Ц до 120°Ц / 14°Ф до 248°Ф |
| Опсег контроле влажности | 5-99% РХ |
| Дисплаи Типе | ЛЦД |
| Дужина сонде | Approximately 1.4 meters (55.12 inches) |
| Тежина артикла | 1.08 фунти |
| Димензије пакета | 6.65 к 6.3 к 2.05 инча |
9. Гаранција и подршка
The SENSTREE Dual Probe Temperature & Humidity Controller comes with a 12-месечна гаранција from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
For technical support, troubleshooting assistance, or warranty claims, please contact SENSTREE customer service through the retailer where the product was purchased or visit the official SENSTREE webсајт за контакт информације.