KYORITSU AC Clamp Meter 2002PA Instruction Manual

1. Готовоview

The KYORITSU AC Clamp Meter 2002PA is a versatile electrical measuring instrument designed for accurate measurement of AC current up to 2000A. It features a large teardrop-shaped core for easy clamping around conductors, a recorder output terminal, and multiple functions including AC/DC voltage, resistance, and continuity testing. This manual provides essential information for safe and effective use of the device.

Figure 1: KYORITSU AC Clamp Meter 2002PA

This image shows the KYORITSU AC Clamp Meter 2002PA, a black handheld device with a red clamp jaw at the top. The display shows "000" and there are several buttons below it. The device is designed for measuring electrical current without direct contact.

2. Безбедносне информације

Always read and understand this instruction manual before using the KYORITSU AC Clamp Meter 2002PA. Failure to follow safety instructions may result in electric shock, fire, or damage to the device. This product complies with IEC 61010-1, IEC 61010-031, IEC 61010-2-032, and IEC 61326-1 standards.

• немој use the meter if it appears damaged or is operating abnormally.
• немој применити волtage or current exceeding the maximum rated values.
• Пре рада се уверите да је поклопац батерије безбедно затворен.
• Увек носите одговарајућу личну заштитну опрему (ЛЗО) када радите са електричним колима.
• немој use the meter in wet environments or during electrical storms.
• Refer to local and national safety codes for proper electrical work procedures.

3. Кључне карактеристике

• Large Teardrop Core: Facilitates easy clamping around thick conductors.
• Мерење високе струје: Capable of measuring large AC currents up to 2000A.
• Мултифункционални: Measures AC current, AC voltagе, ДЦ волtage, resistance, and continuity.
• Recorder Output Terminal: Allows connection to external recording devices.
• висока резолуција: Features a small resolution of 0.1A for precise measurements.
• Data Hold & Peak Hold: For capturing stable or peak readings.
• Аутоматска уштеда енергије: Extends battery life by automatically turning off after a period of inactivity.

4. Подешавање

4.1 Инсталација батерије

1. Пронађите поклопац одељка за батерије на задњој страни мерача.
2. Use a screwdriver (if required) to open the battery compartment.
3. Insert two AA (R6P, 1.5V) batteries, ensuring correct polarity.
4. Вратите поклопац одељка за батерије и чврсто га причврстите.

4.2 Connecting Test Leads (for Voltagе/отпор/континуитет)

1. Insert the red test lead into the VΩ terminal.
2. Insert the black test lead into the COM terminal.
3. Ensure connections are secure before taking measurements.

5. Упутство за употребу

5.1 Measuring AC Current

1. Turn the rotary switch to the "ACA" position.
2. Отворите цлamp вилицу притиском на полугу.
3. Enclose only one conductor of the circuit to be measured within the clamp вилица.
4. Release the lever to close the clamp вилица чврсто око проводника.
5. Read the AC current value displayed on the LCD.

5.2 Меасуринг АЦ Волtage

1. Turn the rotary switch to the "ACV" position.
2. Connect the test leads across the circuit points where voltagе треба мерити.
3. Прочитајте АЦ волtagе вредност приказана на ЛЦД-у.

5.3 Меасуринг ДЦ Волtage

1. Turn the rotary switch to the "DCV" position.
2. Connect the test leads across the circuit points where voltage is to be measured, observing polarity.
3. Прочитајте ДЦ волtagе вредност приказана на ЛЦД-у.

5.4 Мерење отпора

1. Окрените ротациони прекидач у положај "Ω".
2. Пре мерења отпора, уверите се да је коло без напона.
3. Connect the test leads across the component or circuit path to be measured.
4. Очитајте вредност отпора приказану на ЛЦД екрану.

5.5 Тест континуитета

1. Turn the rotary switch to the "Continuity" position (often indicated by a speaker icon).
2. Уверите се да је коло без напона.
3. Connect the test leads across the component or circuit path.
4. If continuity exists (resistance below approximately 50±35Ω), the buzzer will sound.

6. Одржавање

6.1 Чишћење

• Wipe the meter with a soft, dry cloth.
• немој користите абразивна средства за чишћење или раствараче.

6.2 Замена батерије

• Када се индикатор батерије појави на екрану, замените батерије као што је описано у одељку 4.1.
• Remove batteries if the meter will not be used for an extended period to prevent leakage.

КСНУМКС. Решавање проблема

8. Спецификације

Figure 2: Detailed specifications for KYORITSU AC Clamp Meter 2002PA and 2002R (RMS).

This image displays a table of detailed specifications for the KYORITSU AC Clamp Meter models 2002PA and 2002R. It includes measurement ranges and accuracies for AC current, AC voltagе, ДЦ волtage, resistance, and continuity, along with physical dimensions, power source, and compliance standards.

9. Гаранција и подршка

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official KYORITSU webсајт. Сачувајте рачун као доказ о куповини за потребе гаранције.