Redroad S1 Wireless Robotic Pool Cleaner User Manual

Увод

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Redroad S1 Wireless Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The Redroad S1 is designed to clean flat-bottomed pools, both above-ground and in-ground, up to 1100 sq. ft. It features a wireless design, auto-parking function, and a powerful cleaning system to ensure a clean pool with minimal effort.

Важна безбедносна упутства

УПОЗОРЕЊЕ: Да бисте смањили ризик од повреда, не дозволите деци да користе овај производ.

• Прочитајте сва упутства пре употребе уређаја.
• Немојте користити чистач када су људи у базену.
• Уверите се да је прикључак за пуњење сув пре пуњења.
• Користите само пуњач који је испоручио произвођач.
• Do not use the cleaner if the power cord or charger is damaged.
• Keep the cleaner away from heat sources and direct sunlight during charging.
• Do not attempt to repair the cleaner yourself. Contact authorized service personnel for repairs.
• Чувајте чистач на хладном и сувом месту када се не користи.

Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• 1 x Redroad S1 Robotic Pool Cleaner
• 1 x Reusable Filter
• 1 к пуњач
• 1 x Кука за извлачење
• 2 x Scrubber Pads
• 1 к Упутство за употребу

Image: The Redroad S1 Robotic Pool Cleaner with its included accessories, such as the charger, retrieval hook, and filter.

Сетуп

1. Пуњење усисивача

Before first use, fully charge the Redroad S1. The battery requires approximately 3 to 4 hours to reach full capacity, providing up to 130 minutes of cleaning time.

1. Уверите се да је усисивач сув и чист пре пуњења.
2. Connect the charger to the charging port on the cleaner.
3. Укључите пуњач у стандардну електричну утичницу.
4. The indicator light on the cleaner will show charging status (refer to LED indicator section for details).
5. Када се потпуно напуни, искључите пуњач.

Image: The Redroad S1 cleaner highlighting its 5200 mAh long-lasting battery, capable of 130 minutes runtime after 3-4 hours of charging.

2. Preparing the Cleaner for Use

No complex assembly is required. The Redroad S1 is designed for ease of use.

• Ensure the filter basket is properly installed and clean.
• Check that the scrubber pads are securely attached to the bottom of the cleaner.

Упутство за употребу

1. Starting the Cleaning Cycle

1. Притисните дугме за напајање на чистачу да бисте га укључили.
2. Gently submerge the cleaner into your pool. The cleaning process will begin automatically.
3. The cleaner will navigate the pool floor using its smart route mapping system to ensure full coverage.

Image: The Redroad S1 in action, illustrating its instant start feature, self-parking capability when battery is low, auto-steering to reverse at walls, and smart route mapping for efficient pool coverage.

2. Automatic Features

• Auto-Parking: When the battery is low, the cleaner will automatically stop near the edge of the pool for easy retrieval.
• Auto-Steering: The cleaner is equipped with auto-steering technology that allows it to reverse direction upon encountering pool walls, ensuring continuous cleaning.
• Smart Route Mapping: An adaptive system ensures comprehensive cleaning coverage of your pool floor.

Слика: Из ваздуха view of the Redroad S1 cleaning a pool, demonstrating its ability to cover areas up to 1100 sq. ft. with a runtime of up to 130 minutes.

Слика: прamples of flat-bottomed pools, including those under 1100 sq. ft., flat-floored pools, above-ground pools, and in-ground pools, all suitable for the Redroad S1.

Слика: Подводни свет view of the Redroad S1 showcasing its dual large suction ports for trapping debris and powerful dual motors for efficient and fast cleaning.

Image: The Redroad S1 demonstrating its 18-degree slope climbing ability to navigate small creases and its IPX8 waterproof rating for stable underwater operation and safety.

Одржавање

1. Чишћење корпе филтера

Regularly clean the filter basket to maintain optimal cleaning performance. The 180µm ultra-fine filter captures microscopic debris, including sand particles.

1. After each cleaning cycle, remove the cleaner from the pool using the retrieval hook.
2. Open the cleaner to access the filter basket.
3. Извадите корпу филтера и испразните сакупљени отпад.
4. Rinse the filter basket thoroughly with a hose to remove fine particles.
5. Ensure the filter basket is completely dry before reinserting it into the cleaner.

Слика: Експлодирана view of the Redroad S1 showing its 180µm filter tray and 1.5L debris basket, designed to capture fine particles and hold a significant amount of waste.

2. Cleaning the Scrubber Pads

Inspect the scrubber pads periodically. If they are worn or dirty, clean them or replace them as needed to ensure effective scrubbing of the pool surface.

3. Складиштење

When not in use for extended periods, store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan.

Решавање проблема

Спецификације

Гаранција и подршка

The Redroad S1 Robotic Pool Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Redroad customer service through their official webсајт или контакт информације које сте добили уз куповину.

Webсајт: www.redroad.cc (Прampлинк, стварни линк може да варира)