SYNCO Xvision Video Transmission System User Manual

1. Производ је готовview

The SYNCO Xvision Video Transmission System provides stable and high-quality wireless video transmission for professional filming, live streaming, and TVC production. This system includes one transmitter (TX) and one receiver (RX), designed for real-time monitoring with ultra-low latency.

Figure 1.1: SYNCO Xvision Video Transmission System (1 TX and 1 RX) and included USB-C cables.

Кључне карактеристике:

• Superior Signal Penetration: Stable 1080P/60fps video transmission over long distances (up to 300m) using SYNCO's ultra-penetration technology.
• Ултра-ниско кашњење: Achieves a 40ms latency for precise real-time feedback, crucial for dynamic shooting environments.
• Low Power Design: Utilizes advanced low-power chips and intelligent power management, consuming only 2W, ensuring quiet and efficient operation without fan cooling.
• All-in-One Assistive App (SYNCO Link): Supports real-time monitoring, image adjustments (zebra stripes, mirror, inverse colors), video saving, screenshot, and playback functions.
• Smart Design, Easy Operation: Features a 1.47-inch large display for real-time device status, intuitive button layout, and automatic pairing memory.
• Флексибилне опције напајања: Supports NP-F battery (7.4-8.4V) and USB-C power input (5V 2A) for versatile use.
• Компактан и лаган: Weighs only 119g with foldable antennas, making it highly portable.

2. Шта је у кутији

• 1 к предајник (ТКС)
• 1 к пријемник (РКС)
• 1 к кабл типа Ц

Figure 2.1: Included components: Transmitter, Receiver, and Type-C Cable.

3. Распоред уређаја и портови

Familiarize yourself with the various components and connection points of the SYNCO Xvision units.

Слика 3.1: Страна view of the unit highlighting the Power Switch, Pairing Button, and 5V IN USB-C Port.

Figure 3.2: HDMI ports on the Transmitter (HDMI IN, HDMI OUT/Loop Out) and Receiver (2x HDMI OUT).

• Прекидач: Used to turn the device On or Off.
• Дугме за упаривање: Initiates the pairing process between units.
• USB-C Port (5V IN): За напајање.
• HDMI IN (Transmitter): Connects to the video source (e.g., camera).
• HDMI OUT (Transmitter - Loop Out): Allows for local monitoring of the input signal.
• HDMI OUT (Receiver): Connects to display monitors. The receiver has two HDMI OUT ports.
• Антене: Foldable antennas for signal transmission and reception.

4. Подешавање и почетни рад

4.1 Напајање уређаја

The SYNCO Xvision system offers flexible power options:

• NP-F Battery: Insert a compatible NP-F battery (7.4-8.4V) into the battery slot. Press the lock button to slide the battery in or out.
• УСБ-Ц напајање: Connect a 5V 2A power source to the USB-C port.

Figure 4.1: Attaching an NP-F battery to the unit.

Figure 4.2: Powering the unit via USB-C cable.

4.2 Unfolding Antennas

Before operation, gently unfold the antennas on both the transmitter and receiver units to ensure optimal signal performance.

Figure 4.3: Unfolding the antenna for operation.

4.3 Укључивање/искључивање

To power on the device, slide the power switch down. To power off, slide the switch up. The device will automatically reconnect to a previously paired device upon startup.

4.4 Упаривање јединица

The transmitter (TX) and receiver (RX) units typically come pre-paired. If re-pairing is necessary or for pairing additional receivers:

1. Уверите се да су и предајник и пријемник укључени.
2. Long press the pairing buttons on both the transmitter and receiver for 5 seconds to enter pairing mode.
3. Once paired, the screen will display "Paired".

Note: A single transmitter supports up to 4 receivers (including RX and APP monitoring devices). The device will exit pairing mode if no device is found within 90 seconds. Pair receivers one at a time.

4.5 Connecting to Equipment

1. Connect the HDMI cable from your camera or video source to the ХДМИ ИН порт на предајнику.
2. Connect an HDMI cable from the receiver's ХДМИ ОУТ port to your monitor's ХДМИ ИН лука.

Figure 4.4: Transmitter connected to a camera.

Figure 4.5: Receiver connected to a monitor.

5. Руковање системом

5.1 Monitoring Display

The 1.47-inch display on both units provides real-time status information, including:

• Transmitter (TX) / Receiver (RX) status
• Статус ВиФи везе
• Connection signal strength
• Ниво снаге
• Resolution (e.g., 1080P)
• Frame Rate (e.g., 60fps)
• Bitstream (e.g., 1Mbps)

Figure 5.1: Display indicators for operational status.

5.2 Using the SYNCO Link App

The SYNCO Link App enhances your monitoring experience with additional features:

• Real-time monitoring on your smart device.
• Precise image adjustments (zebra stripes, mirror, inverse colors).
• Built-in video saving, screenshot, and playback functions.

Refer to the SYNCO Link App manual for detailed instructions on connecting and using the app.

5.3 Multi-User Monitoring

The system supports simultaneous wired and wireless transmission, enabling efficient collaboration. Real-time monitoring across multiple devices is ideal for directors, lighting designers, makeup artists, and art directors.

Figure 5.2: Multi-user monitoring setup.

6. Одржавање

• Keep the units clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Избегавајте излагање уређаја екстремним температурама, влажности или директној сунчевој светлости.
• Store the units in a dry, cool place when not in use.
• Ensure all cables are properly connected and not strained.
• Regularly check for firmware updates from the manufacturer's official webсајт како би се осигурале оптималне перформансе и компатибилност.

КСНУМКС. Решавање проблема

8. Спецификације

9. Званични видео производа

Watch the official product video for a visual guide on unboxing, product introduction, power options, ports, and operational procedures.

10. Гаранција и подршка

For warranty information, technical support, or service inquiries, please refer to the official SYNCO webсајт или директно контактирајте њихову корисничку службу. Сачувајте рачун за куповину за потребе гаранције.