Maxxima MEL-S1013100W LED Outdoor Flood Wall Light Instruction Manual

1. Безбедносне информације

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Увек искључите напајање на прекидачу пре инсталације или сервисирања.
• Консултујте квалификованог електричара ако нисте сигурни у процес инсталације.
• Уверите се да су сви електрични прикључци безбедни и да су у складу са локалним прописима и прописима.
• Do not install on a dimmer switch.
• This fixture is rated for outdoor use and is water resistant.

2. Садржај пакета

Проверите да ли су све компоненте присутне пре почетка инсталације.

• LED Outdoor Flood Wall Light (1 unit)
• Прибор за монтажу (вијци, конектори за жице)
• Заптивка
• Упутство за употребу

Figure 2.1: Product components and adjustable parts.

3. Карактеристике производа

The Maxxima LED Outdoor Flood Wall Light is designed for reliable outdoor security and illumination.

• Снажно осветљење: Delivers 950 lumens of 3000K warm white light with an energy-efficient 13W design.
• Напредна детекција покрета: PIR motion sensor with up to a 70 ft range.
• Adjustable Timers: Choose from 1, 5, or 10 minutes for how long the light stays on after motion detection.
• Сензор од сумрака до зоре: Photocell sensor automatically operates at night and conserves energy during the day.
• Подесива глава: Easily direct the light beam with a 180° vertical tilt.
• Adjustable Arm and Sensor: 90° vertical arm tilt and 180° vertical tilt & horizontal swivel for the motion sensor, with 360° sensor rotation.
• Издржљива конструкција: Built with aluminum, rated for 50,000 lifetime hours, ETL listed.

4. Инсталација

4.1 Монтажа уређаја

1. Искључите струју на прекидачу пре почетка инсталације.
2. Уклоните постојећи уређај (ако постоји) и искључите ожичење.
3. Attach the mounting plate to the junction box using the provided screws. Ensure the gasket is properly seated between the fixture and the mounting surface for a weather-tight seal.
4. Feed the electrical wires from the junction box through the center hole of the mounting plate.

4.2 Ожичење

Повежите жице на следећи начин:

• Повежите Црно жица од уређаја до Црно (Live/Hot) wire from the junction box.
• Повежите Бела жица од уређаја до Бела (Неутрална) жица из разводне кутије.
• Повежите Зелена (Ground) wire from the fixture to the Зелена or bare copper (Ground) wire from the junction box.
• Осигурајте све везе помоћу приложених жичних конектора.

Figure 4.1: Wiring connections for the flood light.

4.3 Завршна скупштина

1. Пажљиво увуците све жице у разводну кутију.
2. Поравнајте причвршћивач са монтажном плочом и причврстите га преосталим завртњима.
3. Вратите напајање на прекидач.

Figure 4.2: Installed flood light on an exterior wall.

5. Подешавање и подешавања

The flood light features adjustable settings for the motion sensor and timer.

5.1 Adjusting the Sensor and Timer

The sensor unit has two adjustable dials located on its underside:

• TIMER Dial: Controls how long the light stays on after motion is detected. Options include 1 minute, 5 minutes, 10 minutes, or Dusk-to-Dawn (D2D).
• SENSITIVITY Dial: Adjusts the motion detection range. Options include 10 ft, 20 ft, 50 ft, or MAX (up to 70 ft).

To adjust, gently rotate the dials to your desired setting. The 'Test' mode on the TIMER dial allows for quick testing of motion detection during daylight hours.

Figure 5.1: Timer and Sensitivity adjustment dials.

5.2 Adjusting Light Head and Sensor Position

The light head and motion sensor can be adjusted to cover specific areas:

• The light head can be tilted up to 180° vertically.
• The arm connecting the sensor to the base can tilt 90° vertically.
• The motion sensor itself can tilt 180° vertically and swivel 180° horizontally, with a full 360° rotation capability.

Figure 5.2: Adjustable light head and motion sensor.

6. Упутство за употребу

Once installed and configured, the Maxxima LED Outdoor Flood Wall Light operates automatically based on its sensor settings.

• Dusk-to-Dawn Mode (D2D): When the TIMER dial is set to D2D, the light will automatically turn on at dusk and remain on until dawn, regardless of motion.
• Режим сензора покрета: When the TIMER dial is set to 1, 5, or 10 minutes, the light will activate when motion is detected within the set sensitivity range and ambient light conditions (typically at night). The light will remain on for the selected duration after the last motion is detected, then turn off.
• Тест Моде: Setting the TIMER dial to 'Test' allows you to verify motion detection during daylight. The light will turn on for a few seconds when motion is detected, then turn off. This mode is useful for positioning the sensor.

7. Одржавање

This LED flood light requires minimal maintenance.

• Чишћење: Периодично обришите уређај меком крпомamp крпом да бисте уклонили прљавштину и остатке. Не користите абразивна средства за чишћење или раствараче.
• инспекција: Regularly check for any loose connections or damage to the wiring or housing.
• Интегрисани ЛЕД извор светлости није заменљив од стране корисника.

КСНУМКС. Решавање проблема

If you experience issues with your flood light, refer to the following table for common problems and solutions.

9. Спецификације

10. Гаранција

This Maxxima LED Outdoor Flood Wall Light is backed by a 3 година гаранције од датума куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.

11. Подршка

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer service.

Visit the Maxxima Store: MaxximaLEDLighting on Amazon

Maxxima is an American company with USA-based offices and customer service.