Gedsffati HD08
Gedsffati HD08-G Gas and CO Detector User Manual
Модел: ХД08
Увод
The Gedsffati HD08-G is a direct insertion combined gas and carbon monoxide (CO) detector designed for home use. It provides real-time monitoring of gas and CO concentrations, offering audible and visual alarms to enhance safety. This manual provides essential information for the proper installation, operation, and maintenance of your detector.
Важне информације о безбедности
- Пажљиво прочитајте сва упутства пре инсталације и употребе.
- Овај уређај је намењен само за унутрашњу употребу.
- Do not paint the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
- Do not block the ventilation openings of the detector.
- Regularly test the detector as instructed in this manual.
- In case of an alarm, follow the emergency procedures outlined in the operating section.
- This detector is not a substitute for proper maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.
Производ је завршенview и карактеристике
The HD08-G detector features high-precision sensors for reliable detection of combustible gases (Natural Gas, LPG, Methane, Propane, Butane) and Carbon Monoxide. Its 2.1-inch HD color screen provides clear, real-time information.
Кључне карактеристике:
- High-precision sensors for gas and CO detection.
- High-definition colorful large screen display (2.1-inch, 240*296 resolution, IPS ultra broad perspective).
- Audible and visual alarm system.
- Fault self-check function.
- Плуг анд плаи инсталација.
- Real-time monitoring of gas and CO concentration, temperature, and humidity.
Компоненте:
The device includes a main display unit with three control buttons (H, O, D) and an intelligent power indicator light.

Слика: Фронт view of the Gedsffati HD08-G detector highlighting its display and features like high precision sensors and audible/visual alarm.

Слика: Експлодирана view illustrating the internal high-precision sensors and sensitive detection performance of the HD08-G detector.
Подешавање и инсталација
The HD08-G detector is designed for simple plug-and-play installation.
- Изаберите одговарајућу локацију:
- For gas detection: Install near gas appliances (e.g., stove, water heater) where gas leaks might occur. Combustible gases like LPG and propane are heavier than air and tend to sink, so place the detector lower. Natural gas and methane are lighter than air and rise, so place it higher.
- For CO detection: Install at breathing height, typically 1.5 meters (5 feet) from the floor. Avoid placing it directly above heat sources or in areas with high humidity.
- Ensure the detector is not obstructed by furniture, curtains, or other objects.
- Plug in the detector: Insert the detector directly into a standard electrical outlet. The device will power on automatically.
- Initial self-check: Upon powering on, the detector will perform a self-check. The intelligent power indicator light will show green if normal.

Слика: прamples of suitable installation locations for the HD08-G detector in different environments, emphasizing its versatility for home and travel.
Упутство за употребу
Прикажи информације:
The 2.1-inch HD color screen displays the following information:
- ЦО ППМ: Carbon Monoxide concentration in parts per million.
- ГАС: Combustible gas concentration, often represented by a bar graph or numerical value.
- температура: Ambient temperature (e.g., in °F or °C).
- Влажност: Релативна влажност процентtage.
- Иконе статуса: Icons for sound, alarm, and light sensor.

Image: The detector's display showing real-time monitoring of CO and combustible gas concentrations, along with temperature and humidity.

Слика: Детаљна view of the 2.1-inch HD color screen display, highlighting its clarity and technical specifications.
Функција самотестирања:
To perform a manual self-test:
- Short press the 'O' button on the front of the detector.
- The device will initiate a self-test sequence, activating the alarm and checking sensor functionality.
- The intelligent power indicator light will show green for normal operation. A red light indicates a mute error or sensor malfunction.

Image: Illustration of the intelligent power indicator light and the self-test function, explaining the meaning of green and red light indicators.
Alarm Indications:
When gas or CO concentration reaches dangerous levels, the detector will activate an audible and visual alarm.
- Звучни аларм: A loud siren will sound.
- Визуелни аларм: The screen will display alarm messages, and the indicator light will turn red.

Image: The detector in an alarm state, demonstrating the sound and light alarm to prevent danger, with CO and gas levels displayed.
У случају аларма:
- Не паничите.
- Отворите прозоре и врата да бисте проветрили простор.
- Turn off all gas appliances and sources.
- Одмах евакуишите просторије.
- Позовите свог добављача гаса или хитне службе са безбедне локације.
- Do not re-enter the premises until it has been declared safe by professionals.
Одржавање
- Редовно чишћење: Gently wipe the detector's exterior with a soft, damp cloth. Do not use cleaning agents, solvents, or abrasive materials.
- Месечни тест: Perform the self-test function (short press 'O' button) at least once a month to ensure proper operation.
- Избегавајте препреке: Ensure that the detector's ventilation openings are not blocked by dust, dirt, or other objects.
- Животни век сензора: Gas and CO sensors have a limited lifespan. Refer to the product specifications or manufacturer's guidelines for replacement recommendations.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Детектор се не укључује. | Нема струје из утичнице. | Check the power outlet with another appliance. Ensure the detector is fully plugged in. |
| Red indicator light / Alarm during self-test. | Sensor malfunction or mute error. | Unplug and re-plug the detector. If the issue persists, contact customer support. |
| Лажни аларми. | Interference from strong fumes (e.g., cleaning products, paint, aerosols) or high humidity. | Ensure proper ventilation. Relocate the detector away from sources of fumes or excessive humidity. |
| Екран је празан или нечитљив. | Power issue or display malfunction. | Check power connection. If still blank, contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Gedsffati customer support.
Спецификације
| Број модела | ХД08 |
| Бранд | Гедсффати |
| Парт Нумбер | YDT-EU-HD08-G-WHITE-2PCS |
| Боја | Бела |
| Стиле | Укључите |
| Врста извора напајања | Цордед Елецтриц |
| Волtage | 230 волти (АЦ) |
| Батерије укључене | бр |
| Батерије су потребне | No (1 Lithium Polymer batteries required for internal functions, not user replaceable) |
| Тежина артикла | 60 грама |
| Димензије производа (Д к Ш к В) | 8.5 к 5.1 к 3.3 цм |
| УПЦ | 747086495947 |
Гаранција и подршка
For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. For technical support or further assistance, please contact Gedsffati customer service through their official website or the contact details provided with your product packaging.