AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit Instruction Manual

Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's electric ride-on cars, offering a 2.4G remote control system with a slow start function for enhanced safety.

Молимо вас да пажљиво прочитате ово упутство пре инсталације и употребе како бисте осигурали правилно функционисање и безбедност.

Безбедносне информације

• Ensure the electric vehicle's power is OFF before installing or replacing any components.
• Always verify that the replacement parts match the original specifications (e.g., model number, voltage) to prevent damage.
• Regularly inspect the vehicle's motor, battery, and wiring for any signs of wear or damage. Replace faulty components immediately.
• Keep electronic components away from water and excessive moisture.
• Adult supervision is required during installation and when children operate the ride-on car.

Садржај пакета

The AirheadStorm CLB084-4D kit includes the following components:

• 1 x Receiver (CLB084-4D 12V Control Box)
• 1 x Remote Control (2.4G White Remote Control)

Image: The CLB084-4D receiver and its corresponding 2.4G remote control. The receiver is a black box with wiring, and the remote is white with black buttons.

Подешавање и инсталација

1. Провера компатибилности

Before installation, ensure that the CLB084-4D 12V control box is compatible with your children's ride-on toy. This model is compatible with CLB084-4C 12V systems. Visually compare the appearance and model number of the new parts with your original components.

Image: A comparison showing the CLB084-4A/4C/4D remote (white light indicator) and receiver on the left, and the CLB084-4F remote (red light indicator) and receiver on the right. This helps identify the correct model for replacement.

2. Провере пре инсталације

Verify that other essential functions of the ride-on car, such as the motor and battery, are in normal working condition before installing the new controller and remote.

3. Кораци инсталације

1. Turn off the power to the children's electric vehicle.
2. Carefully remove the old receiver (control box) from the vehicle. Note the wiring connections.
3. Connect the new CLB084-4D receiver to the vehicle's wiring harness, ensuring all connections are secure and match the original configuration.
4. Secure the receiver in its designated location within the vehicle.

Упутство за употребу

1. Операције даљинског управљача

Image: Diagram illustrating the buttons on the 2.4G remote control, including Forward/Backward, Left/Right movement, Emergency Stop, and Speed Adjustment buttons, along with gear indicator lights.

1. Дугме за напајање: Притисните да бисте укључили даљински управљач.
2. Signal Matching: To match the remote control with the receiver:
   • Ensure the vehicle's power is OFF.
   • Притисните и држите тастер „Дугме за подешавање брзине" и "Дугме за хитно заустављање" simultaneously for 5 seconds.
   • While holding, turn on the vehicle's power.
   • When the gear indicator light on the remote control illuminates steadily (does not flash), the signal is successfully matched. The front wheels of the vehicle will turn left and right for one second to confirm.
   • The matching process is available for approximately 2 minutes after the vehicle is powered on.

2. Функције даљинског управљача

• Forward/Backward Button: Controls the vehicle's movement direction.
• Left/Right Movement Button: Controls the vehicle's steering.
• Дугме за хитно заустављање: Immediately stops the vehicle.
• Дугме за подешавање брзине: Cycles through different speed settings (1st, 2nd, 3rd gear, indicated by lights).

3. Режим спавања

The remote control will enter sleep mode if there is no operation for approximately 1 minute. To reactivate, press any button.

Одржавање

• Keep the remote control and receiver clean and dry. Wipe with a soft, dry cloth.
• Avoid dropping or subjecting the components to strong impacts.
• Чувајте комплет на хладном и сувом месту када се не користи.
• Check battery compartment of the remote control periodically for corrosion and replace batteries as needed.

Решавање проблема

Спецификације