Intelbras IVP 7000 SMART EX Wireless Infrared Motion Sensor User Manual

1. Увод

The Intelbras IVP 7000 SMART EX is a wireless passive infrared (PIR) motion sensor designed for robust and reliable intrusion detection. It incorporates advanced signal analysis technology to ensure efficient detection while minimizing false alarms. This sensor is particularly suited for outdoor environments and areas with a high risk of intrusion, offering enhanced security for your property.

This manual provides detailed instructions for the installation, operation, and maintenance of your IVP 7000 SMART EX sensor. Please read it carefully before proceeding with installation and use.

2. Кључне карактеристике

• Имунитет за кућне љубимце: Designed to ignore pets weighing up to 30 kg (approximately 66 lbs), reducing false alarms caused by animals.
• Dual PIR Detection: Utilizes two passive infrared sensors for more accurate and reliable motion detection.
• Adjustable PIR Sensitivity: Allows customization of detection sensitivity to suit specific environmental conditions.
• ЛЕД индикатор статуса: Provides visual feedback on detection events and sensor status.
• Анти-Тampер Свитцх: Triggers an alarm if the sensor cover is opened or the unit is forcibly removed from its mounting location.
• Articulated Mounting Bracket: Includes a flexible bracket for easy and precise positioning during installation.
• Индикација слабе батерије: Notifies users when the battery level is low, ensuring continuous operation.
• оптички филтер: Enhances detection accuracy and reduces interference from external light sources.

3. Подешавање и инсталација

Proper installation is crucial for optimal performance of your IVP 7000 SMART EX sensor. Follow these steps carefully.

3.1 Распакивање и провера компоненти

Пре инсталације, уверите се да су све компоненте присутне:

• IVP 7000 SMART EX Sensor Unit
• Articulated Mounting Bracket
• Screws and Wall Plugs for mounting
• Кориснички приручник (овај документ)

3.2 Инсталација батерије

The sensor operates on batteries (type not specified, typically 3V lithium). Open the sensor casing carefully to access the battery compartment. Insert the batteries, observing the correct polarity (+/-). Close the casinг безбедно.

3.3 Избор места монтаже

Изаберите локацију за монтажу која обезбеђује несметан view of the area to be protected. Avoid aiming the sensor directly at heat sources, reflective surfaces, or areas with strong air currents. For outdoor use, consider protection from direct rain and sunlight, although the sensor is designed for outdoor environments.

Слика 1: Предња страна view of the IVP 7000 SMART EX sensor, showing the PIR lens and Intelbras branding.

Слика 2: Страна view of the IVP 7000 SMART EX sensor, illustrating its profile and weather-resistant design.

3.4 Physical Mounting

1. Attach the articulated mounting bracket to the desired wall or surface using the provided screws and wall plugs. Ensure it is firmly secured.
2. Mount the IVP 7000 SMART EX sensor onto the articulated bracket.
3. Adjust the sensor's angle using the bracket to cover the intended detection area.

Слика 3: Позади view of the IVP 7000 SMART EX sensor, highlighting the mounting points for the articulated bracket.

3.5 Pairing with Control Panel (Wireless Configuration)

Refer to your security system's control panel manual for specific instructions on how to pair a new wireless sensor. Generally, this involves putting the control panel into 'learning' mode and then triggering the sensor (e.g., by opening the tamper switch or walking in front of it) to register it with the system.

3.6 PIR Sensitivity Adjustment

The sensor features adjustable PIR sensitivity. Consult the internal dip switches or potentiometer (if present) inside the sensor casing to fine-tune the detection range and responsiveness. Test the sensor after adjustment to ensure optimal performance and pet immunity.

4. Упутство за употребу

Once installed and configured, the IVP 7000 SMART EX operates automatically to detect motion.

4.1 Детекција покрета

The dual PIR sensors detect changes in infrared radiation caused by movement of warm bodies. When motion is detected within its coverage area, the sensor transmits a signal to the connected control panel.

4.2 ЛЕД индикатор

The LED indicator on the sensor provides visual feedback:

• Brief Flash: Indicates motion detection.
• Continuous Light/Specific Pattern: May indicate low battery or a tamper event (refer to specific model documentation for exact patterns).

4.3 Имунитет кућних љубимаца

The pet immunity feature allows pets up to 30 kg to move freely within the detection zone without triggering an alarm. For this feature to work effectively, ensure the sensor is mounted at the recommended height and its sensitivity is correctly adjusted, as described in the setup section.

5. Одржавање

Regular maintenance ensures the longevity and reliable operation of your sensor.

• Чишћење: Periodically clean the sensor lens with a soft, dry cloth to remove dust, dirt, or cobwebs that could obstruct detection. Do not use abrasive cleaners or solvents.
• Замена батерије: When the low battery indicator activates, replace the batteries promptly. Use only recommended battery types.
• Редовне провере: Test the sensor periodically (e.g., monthly) by walking through its detection zone to ensure it is functioning correctly and communicating with the control panel.
• Tampер Свитцх: Ensure the sensor casing is always securely closed to prevent tampер аларми.

КСНУМКС. Решавање проблема

If you encounter issues with your IVP 7000 SMART EX sensor, refer to the following common problems and solutions.

• Лажни аларми:
  • Check for heat sources (heaters, direct sunlight) or strong air currents (vents, open windows) in the detection zone.
  • Adjust PIR sensitivity to a lower setting.
  • Ensure pet immunity is correctly configured and pets are within the specified weight limit.
  • Очистите сочиво сензора.
• Без детекције:
  • Verify batteries are correctly installed and not depleted. Replace if necessary.
  • Check if the sensor is properly paired with the control panel.
  • Уверите се да подручје детекције нема препрека.
  • Increase PIR sensitivity if needed.
• Индикација слабе батерије:
  • Replace the batteries immediately with new ones of the correct type.
• Tampер Аларм:
  • Ensure the sensor casing is fully closed and secured.
  • Check if the sensor is firmly mounted to prevent accidental removal.

7. Спецификације

8. Информације о гаранцији

This product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your purchase or visit the official Intelbras webсајт. Сачувајте доказ о куповини ради потврде гаранције.

9. Подршка

For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact Intelbras customer support. Contact information can typically be found on the manufacturer's webсајту или на паковању производа.

Онлине ресурси: Visit the Intelbras official webсајт за често постављана питања, ажурирана упутства и преузимање софтвера.

Служба за кориснике: Refer to your product packaging or the Intelbras webсајт за бројеве телефона и подршку путем е-поште.