Увод
This manual provides detailed instructions for the installation, operation, and maintenance of the SENSORWORX SWX-852-2-WH Wireless Remote Light Switch. This device is designed to provide manual control of wirelessly controlled lighting systems, acting as a companion switch to compatible SENSORWORX wireless load controllers.
The SWX-852-2-WH is a line-powered wall station that simplifies multi-way switching configurations by reducing wiring complexity and installation time. It communicates wirelessly using an encrypted 915 MHz proprietary protocol, offering reliable operation within specified ranges.
Безбедносне информације
WARNING: Risk of Electric Shock. Improper installation can lead to serious injury or death.
- Always turn off power at the circuit breaker or fuse box before installing, servicing, or removing the device.
- Инсталацију мора да изврши квалификовани електричар у складу са свим националним и локалним електричним прописима.
- Не користите овај уређај са оптерећењима која прелазе његове наведене номиналне вредности.
- Уверите се да су сви жичани спојеви безбедни и правилно изоловани.
- Овај уређај је намењен само за унутрашњу употребу.
Садржај пакета
Пре почетка инсталације проверите да ли су све компоненте присутне:
- SENSORWORX SWX-852-2-WH Wall Switch Sensor
- Вире Леадс
- Монтажни завртњи
- Жичане матице
- Упутство за употребу (овај документ)
Спецификације
| Феатуре | Спецификација |
|---|---|
| Модел | SWX-852-2-WH |
| Оперативни режим | ОН-ОФФ |
| Цуррент Ратинг | 1 Amps |
| Оператинг Волtage | 120-277V (Line Powered) |
| Тип контакта | Single Pole Single Throw (SPST) |
| Тип конектора | Цримп |
| Тип прекидача | Sensor (Remote) |
| Терминал | Вире Леадс |
| Материјал | Plastic (Housing), Silver (Contact) |
| Димензије (Д к Ш к В) | 1.39 к 1.68 к 2.74 инча |
| Тип монтаже | Surface Mount (in standard wallbox) |
| Цирцуит Типе | 1-way, 3-way, 4-way (with compatible controllers) |
| Радна температура | 32°Ф до 122°Ф (0°Ц до 50°Ц) |
| Влажност | 0-95% без кондензације |
| Вирелесс Протоцол | Encrypted 915 MHz Proprietary |
| Домет | ~80 feet line of sight, ~40 feet through obstructions |
| Цертификати | UL Listed, RoHS Compliant, BAA Compliant, BABA Compliant, TAA Compliant |
| Тежина артикла | 3.88 унци |
Подешавање и инсталација
The SENSORWORX SWX-852-2-WH is designed for straightforward installation in a standard single-gang wallbox, requiring less than 1 inch of mounting depth.
1. Ожичење
- Искључите напајање: Before starting, ensure power to the circuit is OFF at the circuit breaker.
- Identify wires: The SWX-852-2-WH is line-powered and requires connection to line (hot) and neutral wires. It does not directly switch the load.
- Повежите жице: Use the provided wire nuts to connect the switch's wire leads to the corresponding building wiring (Line, Neutral). Consult local electrical codes for proper wiring practices.
- Монтирајте прекидач: Carefully place the switch into the wallbox, ensuring wires are not pinched. Secure the switch to the wallbox using the provided mounting screws.
- Install wallplate: Attach a standard decorative wallplate (not included) over the switch.
- Врати струју: Turn power back ON at the circuit breaker.
Image: SENSORWORX SWX-852-2-WH Wireless Remote Light Switch. This image shows the front view of the white wall switch, illustrating its compact design for easy installation.
2. Pairing with Wireless Controller
The SWX-852-2-WH must be paired with a compatible SENSORWORX wireless load controller (e.g., SWX-950 series power pack, SWX-851 wireless wall switch, or SWX-874-ELV dimmer) to function. The pairing process is quick and typically takes approximately 3 seconds per device.
- Уверите се да је напајање укључено for both the SWX-852-2-WH and the target wireless load controller.
- Покрени режим упаривања on the wireless load controller according to its specific instructions. This usually involves pressing and holding a button on the controller.
- Activate pairing on SWX-852-2-WH: Press and hold the designated button on the SWX-852-2-WH (refer to the specific button layout on your device) until an indicator light confirms pairing mode.
- Confirm pairing: Both devices should provide visual feedback (e.g., LED flashes) to indicate successful pairing. Refer to the controller's manual for specific confirmation signals.
For multi-way switching, additional SWX-852-2-WH units can be paired to the same wireless load controller.
Упутство за употребу
Once installed and paired, the SWX-852-2-WH operates as a remote control for the linked SENSORWORX wireless load controller.
- ОН/ОФФ контрола: Press the top button to turn the connected lights ON. Press the bottom button to turn the connected lights OFF.
- Dimming Control (if paired with a dimmer): If paired with a compatible SENSORWORX wireless dimmer (e.g., SWX-874-ELV), the buttons may also provide dimming functionality. Typically, holding the ON button will brighten lights, and holding the OFF button will dim lights. Refer to the dimmer's manual for specific dimming operations.
- Вишесмерна контрола: In multi-way setups, any paired SWX-852-2-WH switch can control the same lighting load.
Одржавање
The SENSORWORX SWX-852-2-WH is designed for long-term, maintenance-free operation. Follow these guidelines for optimal performance:
- Чишћење: To clean the surface of the switch, use a soft, damp крпа. Не користите абразивна средства за чишћење, раствараче или јаке хемикалије, јер могу оштетити завршну обраду.
- Нема делова које корисник може сервисирати: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the device.
- Услови животне средине: Уверите се да радно окружење остаје у наведеним опсезима температуре и влажности како бисте спречили оштећења.
Решавање проблема
If you experience issues with your SENSORWORX SWX-852-2-WH, consult the following troubleshooting guide:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Switch does not respond to presses. | Нема струје на прекидачу. Not properly paired with a controller. Controller is out of range or powered off. | Verify power at the circuit breaker and wiring connections. Re-attempt the pairing process with the wireless load controller. Ensure the wireless load controller is powered on and within range (~40 feet through obstructions). |
| Lights do not turn ON/OFF or dim correctly. | Неправилно упаривање. Incompatible controller. Интерференција. | Confirm successful pairing with the correct SENSORWORX wireless load controller. Ensure the controller is compatible with the SWX-852-2-WH and supports the desired functionality (e.g., dimming). Minimize sources of wireless interference (e.g., large metal objects, other 900 MHz devices). |
| Рад са прекидима. | Слаб бежични сигнал. Фактори животне средине. | Relocate the wireless load controller or the SWX-852-2-WH to improve signal strength. Ensure no new obstructions have been introduced. Check for extreme temperatures or humidity outside of specified operating conditions. |
If troubleshooting steps do not resolve the issue, please contact SENSORWORX customer support.
Гаранција и подршка
The SENSORWORX SWX-852-2-WH Wireless Remote Light Switch comes with a 5 година гаранције from the date of purchase, covering defects in materials and workmanship under normal use. This warranty is valid only for products purchased from authorized SENSORWORX distributors.
For technical support, warranty claims, or further assistance, please visit the official SENSORWORX website or contact their customer service department. Please have your product model number (SWX-852-2-WH) and proof of purchase available when contacting support.
SENSORWORX products are proudly Made in the USA and comply with UL, RoHS, BAA, BABA, and TAA standards, ensuring high quality and reliability.