XBL-8688

Generic Cordless Ankle Massager User Manual

Model: XBL-8688

1. Увод

Thank you for choosing the Generic Cordless Ankle Massager, Model XBL-8688. This device is designed to provide relaxation and comfort to your ankles and feet through a combination of vibration massage and heat therapy. Its portable and rechargeable design allows for convenient use at home, in the office, or while traveling. Please read this manual thoroughly before use to ensure safe and effective operation.

2. Безбедносне информације

  • Не користите масажер док се пуни.
  • Keep the massager away from water and liquids to prevent damage and electrical hazards.
  • Ensure the device is fully charged before initial use if it does not power on.
  • The massager features an intelligent 30-minute timer to prevent excessive usage. Do not attempt to bypass this safety feature.
  • Consult a healthcare professional before use if you have any pre-existing medical conditions, especially those affecting circulation, sensation, or skin integrity.
  • Discontinue use immediately if you experience pain, discomfort, or any adverse reactions.
  • This device is not intended for medical diagnosis, treatment, or prevention of any disease or health condition.

3. Производ је готовview

3.1 Садржај пакета

  • 1 x Cordless Ankle Massager Brace
  • 1 x Упутство за употребу (овај документ)
  • 1 к Типе-Ц кабл за пуњење
Ankle massager, user manual, and Type-C charging cable laid out next to a red product box.
Figure 1: Package Contents. The image displays the ankle massager, its user manual, and a Type-C charging cable, alongside the product's red packaging box.

3.2 Кључне карактеристике

  • Контрола температуре: 5 adjustable heat settings from 40°C to 60°C (104°F to 140°F).
  • Режими масаже: 3-level vibration massage intensity settings.
  • Дигитални екран: LED screen for temperature and settings, with an easy-to-use control interface.
  • Пуњива и преносива: Built-in 1800mAh battery with USB Type-C charging.
  • Ергономски дизајн: Adjustable ankle brace for a secure and targeted fit.
  • Аутоматско искључивање: Intelligent 30-minute timing for safety.
Close-up of the ankle massager showing the strong stick-on buckle, large LCD display, and skin-friendly material.
Figure 2: Product Features. This image highlights the strong stick-on buckle for secure fastening, the large LCD display for easy operation, and the skin-friendly material for comfort.
Diagram showing the breathable fabric layers of the ankle massager: windproof outside, infrared heating middle, and non-slip inner layer.
Figure 3: Breathable Fabric Construction. A cross-section view illustrating the three layers: a windproof outer layer, an infrared heating middle layer, and a non-slip inner layer, designed for lightweight warmth and comfort.
Image showing the ankle massager on a foot with dimensions (7 inches height, 14.76 inches ankle circumference, 2.56 inches foot width) and a person holding it, emphasizing portability.
Figure 4: Portable Design and Dimensions. This image illustrates the compact size of the massager, showing it worn on an ankle with key dimensions (height, ankle circumference, foot width) and a person easily carrying it, highlighting its portability for outdoor, office, or travel use.

3.3 Спецификације

Феатуре Детаљ
Назив производаЕлектрична грејна ортоза за скочни зглоб
Број моделаXBL-8688
МатеријалABS + Advanced Diving Fabric, Cotton
БојаГреи
Ратед Волtage3.7В
Називна снага7W
Улазни волtage5V
Инпут Цуррент1A
Инпут Повер5W
Капацитет батерије1800мАх литијум-јонски
Време пуњењаОтприлике 3 сата
Usage Time per ChargeApproximately 3 sessions (30 minutes per session)
Начин напајањаТип-Ц пуњење
Ankle Size SuitabilitySmaller than 14.76 inches circumference
Димензије производа (Д к Ш к В)14.76 к 3.54 к 1.18 инча
Тежина артикла180 грама (6.35 унци)
Ниво отпорности на водуНије водоотпоран

4. Подешавање и пуњење

4.1 Почетна наплата

Before first use, or if the device does not power on, fully charge the ankle massager. Connect the provided Type-C charging cable to the massager's charging port and plug the other end into a compatible USB power source (e.g., wall adapter, computer USB port). The charging indicator will display "LL" while charging and "HH" when fully charged. A full charge takes approximately 3 hours.

Important: The massager cannot be turned on or used while it is charging.

4.2 Ношење масажера

Place the ankle massager brace around your ankle. Adjust the strap to ensure a snug yet comfortable fit. The device is designed to fit ankle sizes smaller than 14.76 inches in circumference.

The grey cordless ankle massager with its black control panel displaying '05' and icons for power, heat, and vibration.
Figure 5: Ankle Massager Control Panel. A clear view of the device's control panel, showing the digital display and buttons for power, heat, and vibration settings.

5. Операција

The ankle massager combines heat therapy and vibration massage. It is equipped with an intelligent 30-minute timer for each session.

Six-panel image illustrating the step-by-step usage of the ankle massager, from charging to adjusting heat and vibration.
Figure 6: Step-by-Step Usage Method. This image provides a visual guide to operating the massager, including initial charging, wearing the brace, powering on, adjusting heat levels, and selecting vibration modes.

5.1 Укључивање/искључивање

  1. За укључивање: Притисните и држите дугме за напајање () for 2 seconds. The controller will beep twice, and the default starting temperature is 50°C.
  2. За искључивање: In the startup state, press and hold the power button () for 2 seconds. The product will shut down, and all indicator lights will turn off.

5.2 Подешавање нивоа топлоте

Once the product is powered on, press the heat button () to cycle through the 5 adjustable heat settings. The temperature range is 40°C, 45°C, 50°C, 55°C, and 60°C. The current temperature will be displayed on the LED screen.

Diagram showing 5 heat levels from 40°C to 60°C for infrared hot compress therapy, with an illustration of ankle pain relief.
Figure 7: Heat Therapy Settings. This graphic illustrates the five adjustable temperature settings (40°C, 45°C, 50°C, 55°C, 60°C) for infrared hot compress therapy, designed to relieve various ankle pains.

5.3 Adjusting Vibration Modes

While the product is powered on, press the vibration button () to cycle through the 3 vibration intensity levels. The vibration mode is cyclic. Pressing it once will activate the first gear, pressing it again will increase it to the third gear, and pressing it once more will turn off the vibration function.

Graphic showing 'Multi-Gear Adjustment' with icons for 5 levels of heating and 3 levels of massage, indicating a relaxing experience.
Figure 8: Multi-Gear Adjustment. This graphic illustrates the product's capability for multi-gear adjustment, featuring icons representing 5 levels of heating and 3 levels of massage, promising a relaxing experience from shallow to deep.

5.4 Usage Recommendations

For optimal results, use the massager on the affected area for 15-30 minutes, 2-3 times a day. The intelligent timer will automatically shut off the device after 30 minutes to prevent overuse.

6. Одржавање

  • Чишћење: Wipe the surface of the massager with a soft, damp тканина. Не користите абразивна средства за чишћење нити урањајте уређај у воду.
  • Складиштење: Чувајте масажер на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
  • Одржавање батерије: Да бисте продужили век трајања батерије, избегавајте често потпуно пражњење батерије. Редовно пуните уређај, чак и ако га не користите дуже време.

КСНУМКС. Решавање проблема

Проблем Могући узрок Решење
Уређај се не укључује. Батерија је празна. Charge the device fully (approx. 3 hours) using the provided Type-C cable.
Device stops working during operation. Connected to power supply during use. Ensure the device is disconnected from the charging cable before use. The device cannot operate while charging.
Уређај се аутоматски искључује. Intelligent 30-minute timer activated. This is a normal safety feature. You can restart the device for another session if desired, ensuring not to overuse.
Heat or vibration not felt. Incorrect settings or device not properly positioned. Ensure heat and vibration modes are activated and set to desired levels. Adjust the massager's position on the ankle for optimal contact.

8. Гаранција и подршка

This product is manufactured by YUSHAO. For any questions, concerns, or support needs regarding your Generic Cordless Ankle Massager (Model XBL-8688), please refer to the contact information provided with your purchase or reach out to the retailer. Please retain your proof of purchase for warranty claims.