Polibi King Size Luxury Upholstered Platform Bed

1. Безбедносна упутства

Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in injury or damage to the product.

• Држите све ситне делове и материјал за паковање даље од деце и кућних љубимаца.
• Assemble the bed on a soft, clean surface to prevent scratches.
• Уверите се да су сви спојеви добро затегнути пре употребе. Периодично проверавајте и по потреби поново затегните.
• Немојте прекорачити максималну тежину од 1000 лбс.
• Use only the recommended mattress heights (6", 8", 10", 12") for optimal support and fit.
• Немојте стајати или скачкати по оквиру кревета.
• Ако било који делови недостају или су оштећени, немојте настављати са склапањем. Одмах контактирајте корисничку подршку.

2. Садржај пакета

Your Polibi King Size Luxury Upholstered Platform Bed is shipped in two manageable boxes. Please verify that all components are present before beginning assembly.

Компоненте:

• Тапацирано узглавље
• Тапациране бочне ограде (2)
• Тапацирани подножје
• Централна носачка греда
• Solid Wood Slats (20 pieces, 10cm wide)
• Support Legs (various, including adjustable height options)
• Hardware Pack (bolts, washers, nuts, L-wrench, hammer)
• Упутство за монтажу

A power drill (not included) is recommended for quicker assembly.

3. Подешавање и монтажа

Follow these steps carefully to assemble your Polibi King Size Luxury Upholstered Platform Bed.

1. Распакујте и идентификујте делове: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
2. Причврстите бочне ограде на узглавље кревета: Connect the upholstered side rails to the headboard using the provided hardware. Ensure the connections are firm but do not fully tighten yet.
3. Причврстите подножје: Connect the upholstered footboard to the other end of the side rails. Once all four sides are connected, gently tighten all bolts.
4. Инсталирајте централни носач греде: Place the center support beam along the length of the bed frame. Secure it to the headboard and footboard brackets using the designated hardware.
5. Причврстите потпорне ноге: Screw the support legs into the designated points on the frame and center support beam. Ensure they are stable and level.
6. Инсталирајте летвице: Lay the solid wood slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing. The slats are 10cm wide for enhanced support.
7. Adjust Mattress Height (Optional): The bed frame is designed to accommodate mattresses of 6", 8", 10", or 12" heights. Adjust the bed frame installation method as per the separate instructions provided in the package to achieve the desired mattress height. This typically involves adjusting the height of the support brackets for the slats.

4. Рад и употреба

Once assembled, your Polibi King Size Luxury Upholstered Platform Bed is ready for use.

• Постављање душека: Carefully place your mattress onto the installed slats. The embedded design helps keep the mattress securely in place.
• Капацитет тежине: The bed frame is designed to support up to 1000 lbs, including the mattress and occupants.
• Silent Sleep: Each support point is covered with sponge stickers to prevent noise, contributing to a quiet sleep environment.

5. Одржавање

Proper care will extend the life and appearance of your upholstered platform bed.

• Нега тканина: The bed is upholstered with premium, waterproof polyester fabric. For general cleaning, gently wipe with a damp крпом. У случају просипања, одмах обришите чистом, сувом крпом. Избегавајте јаке хемикалије или абразивна средства за чишћење.
• brisanje prašine: Regularly dust the headboard and frame with a soft, dry cloth or a vacuum cleaner with a brush attachment.
• Провера хардвера: Периодично проверавајте све вијке и спојеве како бисте били сигурни да су чврсто затегнути. По потреби поново затегните да бисте одржали стабилност.
• Избегавајте директну сунчеву светлост: Дуготрајно излагање директној сунчевој светлости може проузроковати блеђење тканине.

КСНУМКС. Решавање проблема

Погледајте овај одељак за решења уобичајених проблема.

• Шкрипави звуци:
  • Уверите се да су сви вијци и завртњи чврсто затегнути.
  • Check that the slats are properly seated and not rubbing against the frame. The sponge stickers on support points are designed to prevent noise.
  • Verify that the mattress is correctly positioned and not causing friction.
• Кревет се осећа нестабилно:
  • Re-check all connections, especially where the side rails meet the headboard and footboard, and the center support beam.
  • Ensure all support legs are firmly attached and making even contact with the floor.
• Клизни душек:
  • The embedded design should prevent mattress sliding. Ensure the mattress is fully seated within the frame.
  • Verify that the correct mattress height setting was chosen during assembly.

7. Спецификације

8. Гаранција и подршка

For specific warranty information and customer support, please refer to the documentation included with your purchase or contact Polibi customer service directly. Keep your purchase receipt for warranty claims.

If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.

Контакт информације: Please refer to the contact details provided on the product packaging or the official Polibi webсајту.