Увод
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sharkoon VK4 Rainbow ATX PC Case. The VK4 Rainbow is designed with a minimalist exterior featuring a perforated front panel and includes four pre-installed 120mm fans with rainbow effect for optimal airflow. It offers ample space for large hardware components and supports radiators up to 360mm, alongside features for clean cable management.

Слика 1: Под углом view of the Sharkoon VK4 Rainbow ATX PC Case, highlighting its perforated front and pre-installed rainbow fans.
Производ је завршенview
The Sharkoon VK4 Rainbow ATX PC Case is engineered for efficient cooling and hardware compatibility. Key features include:
- Супериорно хлађење: Equipped with four pre-installed 120mm rainbow effect fans for excellent airflow. Additional fan mounting options are available.
- Подршка за водено хлађење: The front panel supports radiators up to 360mm, and the top panel accommodates radiators up to 280mm.
- Простран ентеријер: Designed to house large components such as graphics cards up to 35cm, CPU coolers up to 16cm, and power supplies up to 21cm.
- AmpЛе Стораге: Supports up to two 3.5" HDDs or four 2.5" SSDs.
- Погодно повезивање: Top panel features two USB 3.0 ports and a TRRS port for easy access.
- Организовани ентеријер: Generous space for cable management and pre-installed dust filters at all air intake points for cleanliness.
Компоненте кућишта

Слика 2: Предња страна view with perforated panel and three 120mm rainbow fans.

Слика 3: Страна view изложбаasing the tempered glass panel.

Слика 4: Задња страна view with I/O shield area, expansion slots, and exhaust fan.

Figure 5: Top I/O panel with USB 3.0 ports and TRRS audio jack.
Подешавање и инсталација
Follow these steps to install your PC components into the Sharkoon VK4 Rainbow case.
1. Припремите случај
- Пажљиво распакујте кутију и уклоните сав материјал за паковање.
- Remove the tempered glass side panel by unscrewing the thumb screws at the rear and gently pulling it open.
- Уклоните супротну металну бочну плочу да бисте приступили делу за управљање кабловима.

Figure 6: Internal layout of the VK4 Rainbow case, ready for component installation.
2. Инсталација матичне плоче
- The VK4 Rainbow supports Mini-ITX, Micro-ATX, and ATX motherboards.
- Инсталирајте И/О штит у изрез на задњој страни кућишта.
- Align your motherboard with the pre-installed standoffs and secure it with screws. Ensure all standoffs are used for proper support.
3. Инсталација јединице за напајање (PSU)
- Install the PSU into the dedicated compartment at the bottom rear of the case.
- Причврстите напајање завртњима са задње стране кућишта.
4. Инсталација уређаја за складиштење података
- The case supports up to two 3.5" HDDs or four 2.5" SSDs.
- Mount 3.5" HDDs in the drive cage located under the PSU shroud.
- Mount 2.5" SSDs on the dedicated mounting points behind the motherboard tray or on top of the PSU shroud.
5. Инсталација графичке картице и картице за проширење
- Уклоните потребне поклопце слотова за проширење на задњој страни кућишта.
- Insert your graphics card or other expansion cards into the PCIe slots on your motherboard and secure them with screws.
6. Менаџмент каблова
Користите изрезе за усмеравање каблова и тачке за везивање иза лежишта матичне плоче да бисте организовали каблове. Ово побољшава проток ваздуха и естетику.

Figure 7: Cable management area behind the motherboard tray.
Операција
Front Panel Connectivity
The top panel of the VK4 Rainbow case provides convenient access to essential ports:
- 2x USB 3.0 порта: За брзи пренос података са компатибилним уређајима.
- 1x TRRS Port: A combined audio jack for headsets with a single 3.5mm plug (microphone and audio).
- Дугме за напајање: To turn your system on/off.
- Дугме за ресетовање: To restart your system.
Рад вентилатора
The four pre-installed 120mm rainbow effect fans are connected via Molex connectors. Due to this connection type, the fans operate at a constant speed and their speed cannot be adjusted via the motherboard. This ensures consistent airflow but may result in a noticeable fan noise level.
Одржавање
Редовно одржавање помаже у обезбеђивању оптималних перформанси и дугог века трајања компоненти вашег рачунара.
Чишћење филтера за прашину
- The VK4 Rainbow features pre-installed dust filters at all air intake points (front, top, and bottom).
- Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and component cooling.
- Filters can typically be cleaned with compressed air or by rinsing with water and allowing them to dry completely before reinstallation.
Генерал Цлеанинг
- Use a soft, dry cloth to wipe down the exterior surfaces of the case.
- For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid streaks.
- Ensure the system is powered off and unplugged before performing any cleaning inside the case.
Решавање проблема
Овај одељак се бави уобичајеним проблемима на које можете наићи.
- High Fan Noise: The pre-installed fans are connected via Molex and operate at a constant speed. If fan noise is a concern, consider replacing the fans with PWM-controlled alternatives that can be regulated by your motherboard.
- Слаб проток ваздуха/прегревање:
- Check if dust filters are clean and not obstructed.
- Уверите се да се сви вентилатори кућишта правилно окрећу.
- Verify that cables are neatly managed and not blocking airflow paths.
- Потешкоће са управљањем кабловима: While the case offers space, complex builds with many components may require careful planning. Utilize cable ties and routing channels effectively.
- Портови на предњој плочи не раде:
- Ensure the front panel connectors (USB 3.0, audio, power, reset) are correctly plugged into the motherboard headers.
- Проверите упутство за вашу матичну плочу за исправне распореде пинова.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | Схаркоон |
| Назив модела | ВК4 Дуга |
| Број модела ставке | SHA-VK4-RAINBOW BK |
| Тип случаја | АТКС торањ |
| Компатибилност матичне плоче | Мини-ИТКС, Мицро-АТКС, АТКС |
| Боја | Црно |
| Материјал | Метал |
| Димензије производа (Д к Ш к В) | 40.4 к 20.6 к 48.7 цм |
| Тежина артикла | 7.12 кг |
| Унапред инсталирани вентилатори | 4x 120mm Rainbow Effect Fans |
| Макс. Дужина графичке картице | 35 цм |
| Макс. Висина ЦПУ хладњака | 16 цм |
| Макс. ПСУ Ленгтх | 21 цм |
| Носач радијатора (напред) | До 360 мм |
| Носач радијатора (горњи) | До 280 мм |
| Дриве Баис | 2x 3.5" HDD or 4x 2.5" SSD |
| Фронт И/О | 2x USB 3.0, 1x TRRS Audio |
Гаранција и подршка
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon website. If you require technical assistance or have questions not covered in this manual, please contact Sharkoon customer support through their official channels.
Произвођач: Схаркоон Тецхнологиес ГмбХ
Webсајт: ввв.схаркоон.цом