YAMRON 7-in-1 Digital Plant Soil and Water Meter Instruction Manual

Увод

The YAMRON 7-in-1 Digital Plant Soil and Water Meter is a versatile tool designed to help you understand and maintain optimal conditions for your plants. This device provides quick and accurate measurements of key environmental factors, enabling scientific plant care for gardening, farming, lawns, and outdoor plants.

It integrates seven essential functions: soil moisture, soil pH, soil temperature, light intensity, soil fertility, water EC (Electrical Conductivity), and water TDS (Total Dissolved Solids).

Карактеристике производа

• 7-у-1 мултифункционалност: Measures soil moisture, pH, temperature, light intensity, fertility, and water EC/TDS.
• Велики ЛЦД екран са позадинским осветљењем: Features a clear, backlit screen for easy reading of numerical parameters in various lighting conditions.
• Quick and Accurate Measurement: Utilizes advanced probe technology for rapid and precise data acquisition.
• Операција прилагођена кориснику: Simple insertion and button presses for data reading and mode switching.
• Оптимална читљивост: Intuitive design with clear numbers and icons for easy data interpretation.
• Широк опсег примене: Suitable for indoor and outdoor use, including gardens, flower beds, potted plants, and succulents.
• Аутоматско искључивање: Штеди трајање батерије.

Image: The YAMRON meter illustrating its seven distinct measurement modes for comprehensive plant and soil analysis.

Спецификације

Опсези мерења:

• Sunlight Intensity (9 levels): 0-9999 Lux (LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+)
• Soil Moisture (5 levels): 5-95% (DRY-, DRY+, NOR, WET-, WET+)
• Soil pH (12 levels): 3.5-9.0 пХ
• Soil Fertility (3 levels): 0-95% (Low, Medium, High)
• Water TDS (7 levels): 0-1000 ппм
• температура: -9°Ц до 50°Ц (16°Ф до 122°Ф)

Image: A visual representation of the various measurement ranges and their corresponding levels for soil and water parameters.

Сетуп

1. Инсталација батерије: Open the battery compartment on the back of the device. Insert 4 AAA 1.5V batteries, ensuring correct polarity. Close the compartment securely.
2. Иницијална провера: Press the power button to turn on the device. The LCD screen should illuminate.

Упутство за употребу

Пратите ове кораке за тачна мерења:

1. Припремите уређај: Remove the red protective cover from the end of the probes. Turn on the tester by pressing the power button.
2. Уметните сонде: Insert the probes into the soil or water to a depth of approximately 3 to 5 inches (about 10 cm). Ensure the probes are fully submerged in water or firmly in contact with the soil.
3. Прочитајте податке: Wait for approximately 10 seconds for the readings to stabilize. The current measurement will be displayed on the LCD screen.
4. Промените режиме приказа:
   • Press the "pH" button to switch between pH and temperature (°C/°F) readings.
   • Press the "Water" button to switch between EC and TDS readings for water.
   • Long press the "Nutrient/Moist" button to toggle between Fahrenheit and Celsius for temperature.
5. Remove and Clean: After each use, remove the probes from the soil or water and wipe them clean with a cloth.

Важне напомене:

• The soil tester is not designed for direct measurement of liquids (except for EC/TDS functions when specifically measuring water).
• If the soil is too dry or hard, do not force the probes. Lightly moisten the test area and wait 10 minutes before measurement to prevent damage to the device.
• For soil measurements, ensure the probes are inserted deep enough to get an accurate reading from the root zone.

Image: Visual instructions demonstrating the proper steps for using the YAMRON meter, from probe insertion to reading data and cleaning.

Understanding Measurements

Water TDS (Total Dissolved Solids) and EC (Electrical Conductivity):

TDS refers to the total concentration of dissolved substances in water, while EC measures the electrical conductivity, which is directly related to the amount of dissolved salts and minerals. These measurements help assess water purity and nutrient levels in hydroponic solutions or irrigation water.

Tip: High or low TDS is not inherently safe or unsafe; it needs to be analyzed in conjunction with specific ingredients. High TDS may indicate mineral water or polluted water.

Image: A detailed chart illustrating the different ranges of Water TDS and their corresponding water quality classifications.

Soil pH:

Soil pH indicates the acidity or alkalinity of the soil, which significantly impacts nutrient availability for plants.

• 3-4: Strongly Acidic
• 5-6: Slightly Acidic
• 7: Неутрално
• 8-9: Slightly Alkaline

Влажност земљишта:

Measures the water content in the soil, helping determine when to water your plants.

• DRY- (5-20%): Very Dry
• DRY+ (20-40%): Dry
• NOR (40-60%): Normal
• WET- (60-80%): Wet
• WET+ (80-95%): Very Wet

Soil Fertility:

Indicates the nutrient levels in the soil, crucial for plant growth.

• 0-30%: Low Fertility
• 30-60%: Medium Fertility
• 60-95%: High Fertility

Интензитет светлости:

Measures the ambient light intensity, helping ensure plants receive adequate light.

• LOW- (0-1000 Lux)
• LOW (1000-2000 Lux)
• LOW+ (2000-3000 Lux)
• NOR- (3000-4000 Lux)
• NOR (4000-5000 Lux)
• NOR+ (5000-6000 Lux)
• HGH- (6000-7000 Lux)
• HGH (7000-8000 Lux)
• HGH+ (8000-9999 Lux)

Одржавање

• Чишћење сонде: Always wipe the probes clean with a soft cloth after each use to prevent residue buildup, which can affect accuracy. Do not use abrasive materials or harsh chemicals.
• Складиштење: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Replace the protective red cover on the probes when not in use.
• Замена батерије: The device will indicate when batteries are low. Replace all 4 AAA batteries simultaneously to ensure optimal performance.

Решавање проблема

• Нетачна очитавања:
  • Ensure probes are clean and free of soil or water residue.
  • Verify probes are inserted to the correct depth (3-5 inches for soil).
  • Проверите ниво батерије; слабе батерије могу утицати на тачност.
  • For soil measurements, ensure the soil is not excessively dry or hard. Moisten if necessary.
• Уређај се не укључује:
  • Проверите да ли су батерије правилно постављене и да ли су довољно напуњене. Замените их ако је потребно.
• Light Sensor Issues:
  • Уверите се да је подручје сензора светлости на уређају чисто и неометано.
  • Note that the light sensor may show very high readings under strong artificial full-spectrum LED lights, potentially exceeding its practical range for comparison with natural sunlight.
• Cannot Measure Liquid pH:
  • This device is designed for soil pH measurement and is not suitable for directly measuring the pH of liquids.

Гаранција и подршка

YAMRON is committed to providing excellent customer service. While specific warranty details are not provided in this manual, if you encounter any issues or are dissatisfied with your product, please contact YAMRON customer support for assistance and resolution.

Please refer to your purchase documentation or the YAMRON official webсајт за најновије информације о гаранцији и контакт податке.