Povlen TH570-Y
Povlen TH570-Y 5-in-1 Stud Finder Wall Scanner Detector User Manual
Model: TH570-Y
1. Увод
The Povlen TH570-Y is an advanced 5-in-1 electronic wall scanner designed to accurately detect studs, metal objects, pipes, and live AC wires behind various wall materials. This device helps users locate hidden objects before drilling, cutting, or performing other wall modifications, ensuring safety and preventing damage.
Image: The Povlen TH570-Y stud finder, highlighting its upgraded model features for improved accuracy and stability.
2. Безбедносне информације
- Увек прочитајте и разумејте ово упутство пре руковања уређајем.
- Do not rely solely on the stud finder to locate live AC wires. Always turn off power to the area before drilling or cutting into walls.
- Keep the device dry and clean. Avoid exposure to extreme temperatures or humidity.
- Не покушавајте да отворите или модификујете уређај. Поправке треба да обавља само квалификовано особље.
- Одложите батерије одговорно у складу са локалним прописима.
3. Карактеристике производа
- Enhanced Precision and Speed: Locates edges and centers of metal, studs, joists, pipes, and live AC wires with high accuracy.
- Five Scanning Modes:
- Stud Scan: Detects wood and metal studs up to 0.5 inches (13 mm) deep.
- Deep Stud Scan 1: Detects wood and metal studs up to 1 inch (25 mm) deep.
- Deep Stud Scan 2: Detects wood and metal studs up to 1.5 inches (38 mm) deep.
- Metal Scan: Detects metal objects (e.g., rebar, pipes) up to 2.36 inches (60 mm) deep.
- AC Scan: Detects live unshielded AC wires up to 2 inches (51 mm) deep.
- Издржљив дизајн: Shock-resistant and dust-resistant for long-lasting use.
- Јасан ЛЦД екран: Backlit screen shows center and edge indications, mode, and battery status.
- Аудио упозорења: Provides audible signals for detection.
- Continuous Live Wire Alert: Alerts for live AC wires in all scanning modes.
Image: Illustration of the five scanning modes (Stud 1/2", 1", 1 1/2", Metal, AC) and their respective detection depths.
4. Садржај пакета
- Povlen TH570-Y Stud Finder
- Кориснички приручник (овај документ)
- Batteries (Alkaline, pre-installed or included)
5. Подешавање
5.1 Инсталација батерије
The Povlen TH570-Y requires alkaline batteries for operation. Ensure batteries are correctly installed before use.
- Пронађите поклопац одељка за батерију на задњој страни уређаја.
- Slide or open the cover.
- Insert the required batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Добро затворите поклопац одељка за батерије.
6. Упутство за употребу
6.1 Укључивање/искључивање
To power on the device, press and hold the "ON/OFF" button. To power off, press and hold the "ON/OFF" button again until the display turns off, or the device will automatically power off after a period of inactivity.
6.2 Избор режима
Press the "MODE" button to cycle through the available scanning modes: Stud 1/2", Stud 1", Stud 1 1/2", Metal, and AC. The selected mode will be indicated on the LCD display.
Слика: Детаљна view of the stud finder's display and buttons, including Power Button, Mode Button, Scan Button, Direction Indicator, and Mode Indicator.
6.3 Scanning Procedure
For accurate readings, the device must be calibrated against the wall surface before each scan. Calibration ensures the sensor is adjusted to the wall's density.
- калибрација: Place the stud finder flat against the wall where you intend to start scanning. Ensure there are no studs, metal, or wires in the immediate area. Press and hold the "ON/OFF" button. Keep the device still against the wall until the calibration is complete (usually a few seconds). The display will show "CENTER" or a similar indication when ready. Release the "ON/OFF" button.
- Изаберите режим: Choose the appropriate scanning mode using the "MODE" button.
- скенирање: While holding the "ON/OFF" button, slowly slide the device horizontally across the wall surface. Maintain constant contact with the wall.
- Detect Edge: As the device moves over the edge of a stud, the signal strength bars will increase, and an edge indicator may appear.
- Locate Center: Continue sliding until the "CENTER" indicator appears on the display, accompanied by an audio alert. This indicates the center of the stud.
- Verify and Mark: For best accuracy, scan the area from both directions and mark the center point where the "CENTER" indicator consistently appears.
Image: Step 1 of scanning: Calibrating the device by pressing the power button against a clear wall section.
Image: Step 3 of scanning: Slowly moving the stud finder across the wall surface.
Image: The stud finder indicating the edge of a stud as it is moved across the wall.
Image: The stud finder indicating the center of a stud, with a user marking the detected location.
Image: The stud finder's display showing how it indicates the exact center and edge of a stud with visual and audio alerts.
6.4 Детекција жице под наизменичном струјом
The device provides continuous live AC wire alerts in all modes. If a live AC wire is detected, a specific icon (e.g., lightning bolt) will appear on the display, and an audio alert will sound. Exercise extreme caution when live wires are indicated.
Image: A user detecting a live AC wire with the stud finder, emphasizing safety before drilling.
7. Одржавање
- Чишћење: Обришите уређај меком, дamp тканина. Немојте користити абразивна средства за чишћење или раствараче.
- Складиштење: Store the stud finder in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
- Замена батерије: Replace batteries when the low battery indicator appears on the display to ensure optimal performance.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Уређај се не укључује. | Мртве или неправилно инсталиране батерије. | Check battery polarity or replace with new alkaline batteries. |
| Нетачна очитавања или лажно позитивни резултати. | Improper calibration; moisture in wall; presence of other materials. | Recalibrate the device on a clear section of the wall. Ensure the wall is dry. Scan from multiple directions. |
| Device constantly beeps or shows AC warning. | Live AC wires are present; high electromagnetic interference. | Proceed with extreme caution. Turn off power to the area if possible. Avoid scanning near strong electrical fields. |
| Cannot find studs in deep scan mode. | Wall material too thick; object beyond detection depth. | Ensure you are using the correct deep scan mode. Detection depth limits apply to different materials. |
9. Спецификације
| Број модела | TH570-Y |
| Stud Detection Depth | До 1.5 инча (38 мм) |
| Metal Detection Depth | До 2.36 инча (60 мм) |
| Live AC Wire Detection Depth | До 2 инча (51 мм) |
| Извор напајања | Battery Powered (Alkaline) |
| Тежина артикла | 1.76 унци |
| Димензије пакета | 7.76 к 3.39 к 1.65 инча |
| Боја | Black-yellow |
10. Гаранција и подршка
10.1 Информације о гаранцији
This product is covered by a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the documentation provided at the time of purchase or contact customer support.
Extended protection plans may be available for purchase separately. Please check with your retailer for options such as 3-Year or 4-Year Protection Plans.
10.2 Корисничка подршка
For technical assistance, troubleshooting, or general inquiries about your Povlen TH570-Y Stud Finder, please contact Povlen customer support. Contact information can typically be found on the product packaging or the official Povlen webсајту.
Manufacturer: Povlen
For online inquiries, you may visit the Povlen Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.