FeelTech Coating Thickness Gauge User Manual

1. Производ је готовview

The FeelTech MC998 is a high-precision digital coating thickness gauge designed for accurate measurement of paintwork and other coatings on various substrates. It utilizes electromagnetic induction and eddy current effects to provide reliable readings, making it an essential tool for quality control, material inspection, and evaluating used vehicle paint conditions.

Слика 1.1: Предња страна view of the FeelTech MC998 Coating Thickness Gauge.

Figure 1.2: The gauge in use, illustrating its measuring range (0-1500 µm) and compatibility with Fe/NFe base materials.

Кључне карактеристике:

• High-precision digital measurement for various coatings.
• Automatic identification of ferrous (Fe) and non-ferrous (NFe) substrates.
• Wide measuring range: 0-1500 µm.
• Highly sensitive probe for accurate readings.
• Assists in evaluating paint conditions on used vehicles.
• Measurement principle: Electromagnetic induction and Eddy current effect.
• Accuracy: (3% + 2µm).

2. Компоненте производа

Familiarize yourself with the different parts of your coating thickness gauge:

Figure 2.1: Labeled diagram of the MC998 Coating Thickness Gauge.

3. Садржај пакета

Проверите да ли су све ставке присутне у вашем пакету:

Figure 3.1: Contents included with the rechargeable version of the MC998.

• FeelTech MC998 Coating Thickness Gauge
• УСБ кабл за пуњење
• Calibration Films/Plates (for calibration)
• Mini Screwdriver (for battery compartment, if applicable)
• Ланиард
• Торбица за складиштење
• Кориснички приручник (овај документ)

4. Подешавање

4.1 Почетно пуњење

Before first use, ensure the device is fully charged. Connect the provided USB cable to the charging interface (⑪) on the gauge and to a standard USB power source. The charging indicator on the display will show the charging status.

4.2 Укључивање/искључивање

1. To power on the device, press and hold the Power Button (②) for a few seconds. The device will perform a 5-second countdown and an instrument initialization self-check.
2. To power off, press and hold the Power Button (②) again until the display turns off.

5. Упутство за употребу

5.1 режима мерења

The MC998 offers two primary measurement modes: SINGLE and CONTINUOUS. Short press the MODE button (④) to switch between these modes.

Figure 5.1: Illustration of the two measurement modes.

• SINGLE Measurement Mode: Hold the instrument and quickly vertically contact the surface of the measured substrate. The screen displays the measured value after a buzzer sound. This mode is suitable for individual, precise measurements.
• CONTINUOUS Measurement Mode: Hold the instrument and slide the probe across the surface of the measured substrate. The screen continuously updates the measured value as the probe moves. This mode is useful for scanning larger areas or uneven surfaces.

5.2 MAX/MIN Value Lock

When measuring, the screen displays the current value. Short press the MAX/MIN key (③) to lock the upper or lower limit value. The device will lock the upper or lower limit value measured on the surface of the substrate after multiple measurements, allowing for easy identification of extreme readings.

Figure 5.2: MAX/MIN Value Lock feature.

5.3 Data Clearing Function (Zero Calibration)

In the SINGLE point measurement mode, place the instrument probe flat on an iron base or aluminum base surface. If the displayed value is not zero, keep the probe in steady contact with the substrate. Press the ZERO key (⑥) briefly, and the screen will display '0.0', indicating the instrument is reset to zero for that specific base material.

Figure 5.3: Data Clearing Function using the ZERO button.

5.4 Конверзија јединица

The device supports measurement in micrometers (µm) and mils (mil). To switch between units, short press the Power Button / Unit Conversion Button (②) while the device is on.

5.5 Калибрација

For optimal accuracy, periodic calibration is recommended. Use the provided calibration films/plates and the Calibration Buttons (⑤) according to the on-screen prompts. Refer to the detailed calibration procedure in the separate quick start guide or on the manufacturer's website for precise steps.

6. Пријаве

The FeelTech MC998 Coating Thickness Gauge is versatile and can be used in various professional and personal applications:

Figure 6.1: Common applications of the coating thickness gauge.

• Преглед половних аутомобила: Assess the original paintwork and identify areas that may have been repainted or repaired, indicating potential accident history.
• Pipeline Protection: Measure the thickness of protective coatings on pipelines to ensure corrosion resistance and longevity.
• Railing Coating: Verify the uniform application and adequate thickness of paint or protective layers on railings and other metal structures.
• Processing Industry: Quality control in manufacturing processes where coating thickness is critical for product performance and durability.

7. Одржавање

7.1 Чишћење

Обришите уређај меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче, јер могу оштетити уређај.asing or display. Ensure the probe is clean and free of debris before each use to maintain measurement accuracy.

7.2 Складиштење

Store the gauge in its protective pouch in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. Remove the battery if the device will not be used for an extended period (though this model is rechargeable, prolonged storage without use may still benefit from occasional charging to maintain battery health).

КСНУМКС. Решавање проблема

Уобичајени проблеми и решења:

• Уређај се не укључује: Ensure the device is fully charged. If the battery is low, connect it to a power source using the USB cable.
• Нетачна очитавања:
  • Perform a zero calibration (Section 5.3) on a known bare substrate.
  • Ensure the probe is clean and free of dust or debris.
  • Verify that the measurement surface is clean and flat.
  • Recalibrate the device using the provided calibration films (Section 5.5).
• Display shows 'Err' or 'OL': This may indicate an out-of-range measurement or a sensor error. Try recalibrating or restarting the device. If the issue persists, contact customer support.

9. Спецификације

10. Гаранција и подршка

10.1 Информације о гаранцији

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or contact the manufacturer directly for specific terms and conditions regarding warranty coverage and duration.

10.2 Корисничка подршка

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact FeelTech customer support. Contact information can typically be found on the product packaging, the manufacturer's official webсајту или преко вашег места куповине.