FeelTech DM40C KitI 3-in-1 Multimeter Oscilloscope Signal Generator User Manual

1. Увод

The FeelTech DM40C KitI is a versatile handheld digital tool integrating a multimeter, an oscilloscope, and a signal generator into a single compact device. Designed for automotive and general electronic testing, it offers high precision measurements, waveform analysis, and signal output capabilities. This manual provides essential information for the safe and effective operation of your DM40C KitI.

2. Безбедносне информације

Before using the DM40C KitI, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or damage to the device or other equipment.

• Увек се уверите да је уређај у добром радном стању пре употребе.
• Не прекорачујте максималне улазне напоне за јачину звукаtage, current, or other parameters.
• Use only the provided test leads and accessories.
• Avoid contact with live circuits. Always assume circuits are live until proven otherwise.
• Do not operate the device in wet environments or in the presence of explosive gases or fumes.
• Refer to the CAT IV 600V and CAT III 1000V ratings on the input terminals.

3. Садржај пакета

Проверите да ли се у вашем пакету налазе све ставке наведене у наставку:

• 1 x DM40C Digital Multimeter (including bracket and ordinary PVC sleeve)
• 1 x Pair of MP01 Universal Multimeter Probes (red and black)
• 1 x USB Type-C Cable (1.2m)

Figure 3.1: Contents of the DM40C KitI package. Shown are the DM40C digital multimeter, a pair of universal multimeter probes, and a USB Type-C charging cable.

4. Производ је готовview

The DM40C KitI combines three essential functions for electronic testing and analysis:

• мултиметар: Features 4 5/6 high-precision, 60000 (MAX) count, and a standard 5ppm REF for accurate measurements of voltage, current, resistance, capacitance, frequency, duty cycle, and temperature.
• Осцилоскоп: Equipped with a 10-bit ADC, 50M sampling rate, 10M bandwidth, and a vertical resolution of 10 bits. It offers a storage depth of 64Kpcs and vertical sensitivity from 10mV to 10V/div (x1).
• Генератор сигнала: Capable of generating sine wave, triangular wave, and sawtooth wave signals from 1Hz to 50KHz with an amplitude range of 0.5V to 3.0V.

Слика 4.1: Предња страна view of the DM40C, showcasing its display and input terminals.

Слика 4.2: Завршеноview of the DM40's combined functionalities: Multimeter, Oscilloscope, and Signal Generator, emphasizing 4 5/6 high precision and oscilloscope specifications.

4.1 Екран и интерфејс

The DM40C features a 3.5-inch multi-touch IPS screen (480x320 resolution) providing rich colors and a clear display for all measurements and waveform visualizations.

Figure 4.3: The 3.5-inch multi-touch IPS screen of the DM40C, offering a clear and interactive user interface.

4.2 Могућности мерења

The device supports various advanced measurement functions:

• T-RMS/AC+DC/Trend Chart: Measures True RMS with high accuracy, simultaneously measures AC and DC components for complex signals, and displays measurement data periodically with a 3-speed adjustable time base (160ms/320ms/640ms).
• Multi-functional Diode: Понуде за 4 особеtagе волtage drop measurement and resistor measurement. Diode measure thresholds are <0.02V (long beep), <0.45V (two short beeps), <0.75V (short beep), <1.5V (three short beeps). Resistor measure tests resistors within 1KΩ with 1% accuracy.
• Continuity Measure: Quick measure less than 1µs.
• Аутоматско мерење: Auto mV/V gear measure (DC: 0.01mV~1000V, AC: 0.01mV~750V) and Auto uA/mA/A gear measure (0.01uA~10A) without needing to switch modes and sockets.

Figure 4.4: The DM40C displaying a trend chart, illustrating its T-RMS, AC+DC, and periodic data display capabilities.

Слика 4.5: Детаљно view of the DM40C's multi-functional diode and continuity measurement features, including voltage drop thresholds and resistor test accuracy.

Figure 4.6: The DM40C in automatic measurement mode, simplifying voltage and current readings without manual range selection.

Figure 4.7: A typical measurement screen on the DM40C, displaying voltage, frequency, and a waveform.

5. Подешавање

Follow these steps for initial setup of your DM40C KitI:

1. Пуњење: Connect the provided USB Type-C cable to the device and a suitable USB power adapter (not included) to charge the internal battery. The battery indicator on the screen will show charging status.
2. Веза сонде: For multimeter and oscilloscope functions, connect the red test lead to the VΩHz°C/A/mA/uA input terminal and the black test lead to the COM terminal. Ensure connections are firm.
3. Укључено: Press and hold the power button (usually located on the side or top) until the screen illuminates.
4. Почетна подешавања: The device will typically power on in Multimeter mode. You can navigate through modes and settings using the on-screen menu and touch controls.

6. Упутство за употребу

6.1 Режим мултиметра

To use the multimeter functions:

1. Select the Multimeter icon from the main menu or press the dedicated Multimeter button if available.
2. Choose the desired measurement function (e.g., DC Voltagе, АЦ Волtage, Resistance, Diode, Continuity) using the on-screen interface.
3. Connect the test leads to the circuit under test according to the specific measurement type. For voltage, connect in parallel; for current, connect in series.
4. Read the measurement value displayed on the screen. The auto-ranging feature will typically select the appropriate range.

6.2 Режим осцилоскопа

To use the oscilloscope functions:

1. Select the Oscilloscope icon from the main menu.
2. Повежите мерне каблове са извором сигнала.
3. Подесите Временска скала (horizontal axis) to view жељени број циклуса.
4. Подесите Вертикална скала (волtage per division) to fit the waveform within the screen.
5. Подесите Тип окидача (Rising/Falling edge) and Ниво окидача to stabilize the waveform display.
6. Use the measurement cursors (if available) to analyze specific points on the waveform.

6.3 Режим генератора сигнала

To use the signal generator functions:

1. Select the Signal Generator icon from the main menu.
2. Изаберите жељено Вавеформ type (Sine, Triangular, Sawtooth).
3. Подесите Фреквенција within the range of 1Hz to 50KHz.
4. Подесите Ampлитуде између 0.5В и 3.0В.
5. Connect the output of the signal generator to the circuit or device requiring the test signal.

7. Одржавање

Proper maintenance ensures the longevity and accuracy of your DM40C KitI:

• Чишћење: Користите меку, суву крпу за чишћење уређаја. Не користите абразивна средства за чишћење или раствараче.
• Складиштење: Уређај чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• батерија: Recharge the battery regularly, especially if the device will not be used for an extended period, to maintain battery health.
• калибрација: For professional applications, periodic calibration by qualified personnel is recommended to ensure continued accuracy.

КСНУМКС. Решавање проблема

If you encounter issues with your DM40C KitI, refer to the following common problems and solutions:

• Уређај се не укључује: Уверите се да је батерија напуњена. Повежите USB-C кабл и покушајте да укључите уређај током пуњења.
• Нетачна очитавања: Check test lead connections. Ensure the correct measurement function is selected. Verify the circuit under test is within the device's specifications.
• Нема приказа таласног облика у режиму осцилоскопа: Check probe connections. Adjust Time Scale, Vertical Scale, and Trigger Level settings. Ensure the signal source is active.
• Екран не реагује: Attempt a soft reset by holding the power button for an extended period (e.g., 10-15 seconds) until the device restarts.

Ако проблеми и даље постоје, контактирајте корисничку подршку за даљу помоћ.

9. Спецификације

The following tables detail the general and functional specifications of the FeelTech DM40C KitI.

Figure 9.1: Detailed comparison of DM40 series models and technical specifications for the oscilloscope and signal generator functions.

9.1 Oscilloscope / Signal Generator Technical Parameters

9.2 Signal Generator Waveform Project Parameters (DM40A/B/C)

10. Гаранција и подршка

The FeelTech DM40C KitI comes with a standard manufacturer's warranty. Please refer to the product packaging or the seller's terms for specific warranty duration and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.