JONR ED12 Lite Wet Dry Vacuum Cleaner Instruction Manual

1. Увод

Thank you for choosing the JONR ED12 Lite Wet Dry Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before first use and keep it for future reference.

The JONR ED12 Lite is designed for cleaning sealed hard floors, combining vacuuming and mopping in one step. Its cordless design, self-cleaning function, and anti-tangle technology make floor care convenient and effective.

2. Безбедносна упутства

• Прочитајте сва упутства пре употребе уређаја.
• Користите само онако како је описано у овом приручнику. Користите само додатке које препоручује произвођач.
• Не урањајте уређај у воду или друге течности.
• Држите косу, широку одећу, прсте и све делове тела даље од отвора и покретних делова.
• Немојте користити за усисавање запаљивих или запаљивих течности, као што је бензин, нити користити у областима где оне могу бити присутне.
• Не узимајте ништа што гори или дими, као што су цигарете, шибице или врући пепео.
• Будите посебно опрезни приликом чишћења на степеницама.
• Не дозволити да се користи као играчка. Посебна пажња је неопходна када се користи од стране деце или у близини.
• Use only JONR cleaning solution to prevent damage to the motor and ensure optimal performance.
• Уверите се да је батерија потпуно напуњена пре прве употребе.

3. Компоненте производа

The JONR ED12 Lite Wet Dry Vacuum Cleaner comes with the following components:

• ED12 Lite Wet Dry Vacuum Cleaner (Main Body)
• Повер Адаптер
• Решење за чишћење
• Упутство за употребу
• Четка за чишћење
• База за пуњење
• Roller Brush (pre-installed)
• Clean Water Tank (750mL)
• Used Water Tank (450mL)

Figure 1: JONR ED12 Lite main unit and included accessories, including the charging base, cleaning solution, and cleaning brush.

4. Скупштина

Follow these steps to assemble your JONR ED12 Lite:

1. Install the Roller Brush: Place the roller brush at the front of the main body. Ensure it clicks securely into place.
2. Install the Clean Water Tank: Insert the clean water tank into its designated slot on the main body. Screw it securely.
3. Причврстите ручку: Insert the handle vertically into the main body until you hear a click, indicating it is locked.
4. Напуните усисивач: Connect the power adapter to the charging base, then plug it into a wall socket. Place the assembled vacuum onto the charging base to charge the battery. The display will indicate charging status.

5. Операција

5.1 Filling Water Tanks

The JONR ED12 Lite features a dual-chamber design to separate clean and dirty water.

• Clean Water Tank (750mL): Remove the clean water tank from the main body. Fill it with clean water and add the recommended amount of JONR cleaning solution (approximately 10mL). Securely close the tank and reattach it to the vacuum.
• Used Water Tank (450mL): This tank collects dirty water and debris. It should be emptied and cleaned after each use.

Figure 2: The JONR ED12 Lite features separate clean (750mL) and dirty (450mL) water tanks to ensure cleaning with fresh water.

5.2 Режими чишћења

The vacuum offers two cleaning modes for different needs:

• Стандардни режим: Ideal for efficient daily cleaning and light messes.
• Режим појачања: Provides enhanced power for tougher messes, occasional spills, and heavily soiled areas.

Figure 3: Illustration of the two cleaning modes: Auto Mode for general cleaning and Max Mode for stubborn messes.

5.3 Чишћење ивица

The ED12 Lite is designed to clean up to 0.1 inches from edges, ensuring thorough cleaning along baseboards, corners, and narrow gaps.

Figure 4: The vacuum's design allows for effective cleaning in corners and along skirting boards, reaching within 0.1 inches of edges.

5.4 Самоходни објекат

Weighing only 7.7 lbs, the vacuum features a self-propelled function that allows it to glide forward with minimal effort, reducing user fatigue.

Figure 5: The lightweight design and self-propelled feature make the JONR ED12 Lite easy to maneuver and carry, even up stairs.

6. Одржавање

6.1 Emptying Dirty Water Tank

After each use, remove the used water tank, pour out the dirty water and debris, and rinse the tank thoroughly with clean water. Ensure the filter is also cleaned.

6.2 Self-Cleaning Cycle

Place the vacuum on its charging base. Press the self-cleaning button on the handle to initiate the automatic self-cleaning cycle. The vacuum will clean its roller brush and internal components, then dry the roller with air to prevent odors and bacterial growth.

Figure 6: The vacuum automatically cleans its roller brush and dries it with air when placed on the charging base and the self-cleaning cycle is activated.

6.3 Anti-Tangle Technology

The ED12 Lite features a built-in comb and flat scraper to reduce hair wrap around the roller brush and prevent blockages. Regularly check and clean the roller brush and scraper to maintain optimal performance.

Слика 7: Детаљно view of the anti-tangling design, showing the comb-tooth scraper that helps remove hair from the roller brush during operation.

КСНУМКС. Решавање проблема

• Нема напајања: Ensure the battery is charged. Check the power adapter and charging base connections.
• Слабо усисавање: Check if the used water tank is full and needs emptying. Ensure the roller brush is clean and free of obstructions. Clean the filter.
• Цурење воде: Verify that both the clean and used water tanks are correctly installed and their caps are securely closed.
• Необична бука: Check the roller brush for any foreign objects or damage. Ensure all components are correctly assembled.

8. Спецификације

9. Гаранција и подршка

For warranty information, technical support, or to purchase replacement parts, please refer to the warranty card included in your product packaging or visit the official JONR webсајту.