Ergosolid G70 Gas Spring Articulated Monitor Arm Instruction Manual

1. Увод

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Ergosolid G70 Gas Spring Articulated Monitor Arm. Please read this manual thoroughly before installation and retain it for future reference.

Ergosolid G70 Monitor Arm on a desk with a monitor — Figure 1: Ergosolid G70 Monitor Arm in a typical desk setup. This image illustrates the monitor arm supporting a display, enhancing workspace ergonomics.

2. Безбедносне информације

Молимо вас да се придржавате следећих безбедносних мера предострожности током инсталације и употребе:

Ensure all components are present and undamaged before installation. Do not use if any parts are missing or faulty.
This product contains a high-pressure gas spring. Do not attempt to disassemble the gas spring unit.
Do not exceed the maximum weight capacity of 12 kg (26.4 lbs) or the specified monitor size range of 22-35 inches.
Install the monitor arm on a sturdy desk surface capable of supporting the combined weight of the arm and your monitor.
Tighten all screws securely, but do not overtighten to avoid stripping threads or damaging components.
Држите децу и кућне љубимце подаље током инсталације.

3. Садржај пакета

Проверите да ли су све следеће компоненте укључене у ваш пакет:

Склоп ручице монитора
Деск Цлamp База
Grommet Mount Base
ВЕСА плоча
Комплет хардвера (шрафови, подлошке, одстојници)
Шестоугаони кључеви за подешавање
Упутство за употребу

4. Компатибилност

The Ergosolid G70 monitor arm is designed for optimal performance with the following specifications:

Величина монитора: 22 до 35 инча (56 до 89 цм)
Тежина монитора: 2 до 12 кг (4.4 до 26.4 лбс)
ВЕСА компатибилност: 75x75 mm and 100x100 mm

Diagram showing VESA compatibility and monitor size/weight limits — Figure 2: VESA compatibility and monitor specifications. This diagram illustrates the supported VESA patterns (75x75mm, 100x100mm) and the recommended monitor size and weight ranges for the arm.

5. Инсталација

The monitor arm offers two installation methods: desk clamp and grommet mount.

5.1. Изаберите начин монтаже

Дијаграм који приказује радни стоamp and grommet mount installation options — Figure 3: Installation options. This image displays both the desk clamp method (left) for attaching to the edge of a desk and the grommet mount method (right) for securing through a desk hole.

5.1.1. Радни сто Цлamp Инсталација

Причврстите сто цлamp базу до ивице вашег стола.
Затегните цлamp screw until the base is securely fastened to the desk.
Insert the main pole of the monitor arm into the clamp база.

5.1.2. Инсталација монтаже ушне шкољке

If your desk has a grommet hole, insert the grommet mount base through the hole.
Secure the base from underneath the desk using the provided plate and nut.
Insert the main pole of the monitor arm into the grommet base.

5.2. Причвршћивање монитора

Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the VESA plate is oriented correctly (usually with an "UP" indicator).
Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
Причврстите монитор за држач затезањем завртња за закључавање на VESA глави.

5.3. Менаџмент каблова

The monitor arm features an integrated cable management system. Route your monitor's power and video cables through the designated channels along the arm to maintain a tidy workspace.

6. Adjustments and Operation

The Ergosolid G70 monitor arm offers a range of adjustments for optimal ergonomic positioning.

Diagram showing various adjustment capabilities of the monitor arm — Слика 4: Завршеноview of monitor arm adjustments. This image highlights the tilt, pivot, retraction, and height adjustment capabilities of the Ergosolid G70 arm.

6.1. Подешавање затегнутости гасне опруге

The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement. Use the provided hex key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.

6.2. Подешавање висине

Once the gas spring tension is correctly set, you can effortlessly raise or lower your monitor by gently pushing or pulling the monitor to the desired height. The arm allows for a height adjustment range of up to 530 mm.

Diagram illustrating height adjustment of the monitor arm — Figure 5: Height adjustment. The arm allows for vertical movement to position the monitor at an ergonomic viewинг левел.

6.3. Подешавање нагиба

The monitor can be tilted from +85° (upwards) to -30° (downwards) to reduce glare and optimize viewing angles. Simply grasp the monitor and tilt it to your preferred angle.

Diagram illustrating tilt adjustment of the monitor arm — Figure 6: Tilt adjustment. The monitor can be angled up or down for comfortable viewинг.

6.4. Подешавање окретања

The arm allows for a 90° lateral rotation (swivel) to the left and right, enabling you to share your screen or adjust your viewing position easily.

6.5. Rotation (Pivot)

The monitor can be rotated 360° from landscape to portrait orientation without removing it from the arm.

Diagram illustrating pivot adjustment of the monitor arm — Figure 7: Pivot adjustment. The monitor can be rotated 360 degrees for landscape or portrait orientation.

6.6. Retraction/Extension

The articulated arm allows for extension and retraction, providing a maximum reach of 650 mm to position your monitor at the ideal distance from your eyes.

Diagram illustrating retraction and extension of the monitor arm — Figure 8: Retraction and extension. The arm can be moved closer or further away from the user.

7. Одржавање

To ensure the longevity and optimal performance of your Ergosolid G70 monitor arm, follow these maintenance guidelines:

Чишћење: Обришите површине руку меком,amp крпом. Избегавајте абразивна средства за чишћење или раствараче који би могли оштетити завршну обраду.
Периодичне провере: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
Гасна опруга: The gas spring is maintenance-free. Do not attempt to lubricate or disassemble it.

КСНУМКС. Решавање проблема

If you encounter any issues with your monitor arm, refer to the following common problems and solutions:

Проблем	Могући узрок	Решење
Monitor drifts down or up	Gas spring tension is incorrect for monitor weight.	Adjust the gas spring tension using the hex key. Increase tension for heavier monitors (clockwise), decrease for lighter monitors (counter-clockwise).
Monitor is wobbly or unstable	Mounting screws are loose or desk is unstable.	Ensure all mounting screws (clamp/grommet and VESA plate) are securely tightened. Verify desk stability.
Difficulty moving the arm	Gas spring tension is too high or joints are too tight.	Decrease gas spring tension. Check and slightly loosen any joint screws if movement is excessively stiff.
Monitor cannot be rotated (pivot)	Rotation mechanism is too tight.	Check for any locking screws on the rotation mechanism and loosen slightly if present.

9. Спецификације

Феатуре	Спецификација
Модел	Г70
Бранд	Ergosolid
Материјал	Алуминијум
Боја	Графит
Компатибилна величина монитора	22 - 35 инча (56 - 89 цм)
Тежина Капацитет	2 - 12 кг (4.4 - 26.4 фунти)
ВЕСА компатибилност	75x75 mm, 100x100 mm
Тип монтаже	Деск Цлamp, Громмет Моунт
Подешавање висине	До 530 мм
Угао нагиба	+85° / -30°
Угао окретања	90° (лево/десно)
Rotation (Pivot)	360°
Мак Ектенсион	650 мм
Димензије производа	44 x 23 x 13 цм (упаковано)
Тежина производа	4.91 кг

Detailed diagram of Ergosolid G70 monitor arm with dimensions and adjustment ranges — Figure 9: Technical dimensions and adjustment ranges. This diagram provides a visual representation of the arm's maximum extension, height adjustment, tilt, swivel, and rotation capabilities.

10. Гаранција и подршка

For warranty information and customer support, please refer to the official Ergosolid website or contact your retailer. The return policy for this product, if purchased through Amazon, is typically 6 days for refund/replacement, fulfilled by Amazon. Specific warranty terms are provided by the manufacturer.

You can visit the Ergosolid brand store for additional information and support: Ergosolid Brand Store