Увод
The VANPO 1/2-Inch Digital Torque Wrench provides precise torque control for various mechanical applications. This manual outlines the proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.
Кључне карактеристике:
- Precise Accuracy: Delivers reliable torque control with ±2% accuracy, reducing over-tightening and fastener damage.
- Clear Torque Feedback: Features a large backlit LCD display, audible alerts, LED indicators, and vibration feedback for clear confirmation when preset torque is reached.
- Durable & Bidirectional: Built for repeated use in automotive environments, supporting both clockwise and counterclockwise operation.
- Easy & Efficient Operation: Supports Peak and Track modes, with preset torque values, and a tool-free, quick-access battery compartment.
- Широка примена: Suitable for vehicle maintenance, home repair, workshop projects, and industrial machinery.
Сетуп
1. Инсталација батерије
The torque wrench requires two AA batteries (included). To install:
- Unscrew the battery cap at the end of the handle.
- Insert two AA batteries, ensuring correct polarity (negative side down, positive side up).
- Replace the battery cap and tighten securely.
Figure 1: Battery installation and ergonomic handle design.
2. Причвршћивање додатне опреме
The wrench comes with a 125mm extension bar and a 1/2" to 3/8" adapter.
- To attach an extension or adapter, press the quick-release button on the ratchet head and insert the accessory.
- Ensure the accessory is securely locked in place before use.
Figure 2: Quick-release button for attaching sockets and accessories.
Упутство за употребу
1. Power On/Off and Unit Selection
- Притисните тастер ОН/ОФФ button to power on the wrench.
- Притисните тастер У/С button to cycle through measurement units: ft-lb, in-lb, Nm, kg-cm.
Figure 3: LCD display showing selectable measurement units.
2. Setting Target Torque Value
- Користите Up и Доле arrow buttons to adjust the target torque value.
- The LCD will display the current setting.
3. Operating Modes (Peak & Track)
Притисните тастер П/Т button to switch between Peak and Track modes.
- Режим праћења: Displays real-time torque values as force is applied.
- Пеак режим: Captures and displays the maximum torque value achieved during the tightening process.
Figure 4: Explanation of Track Mode and Peak Mode.
4. Примена обртног момента
Apply force to the wrench. As you approach the preset torque value, the wrench will provide triple feedback:
- Звучно упозорење: A buzzer will sound.
- ЛЕД индикатори: Lights on the handle will illuminate (green for 85-90% of target, red for 100%).
- Вибрациона повратна информација: The handle will vibrate.
Figure 5: Triple feedback system for reaching target torque.
5. Функција меморије
The wrench can store multiple preset torque values. Use the M button to access and save memory settings.
6. Screen Lock Function
Дуго притисните M button for 3 seconds to lock the screen and buttons, preventing accidental changes during operation. Long press M again to unlock.
Одржавање
- Чишћење: Wipe the wrench with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents.
- Складиштење: Store the torque wrench in its protective case in a dry, cool place away from direct sunlight and extreme temperatures.
- Замена батерије: Замените батерије када се на ЛЦД екрану појави индикатор празне батерије.
- калибрација: For optimal accuracy, it is recommended to have the torque wrench calibrated periodically by a certified service center.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Кључ се не укључује. | Мртве или неправилно инсталиране батерије. | Проверите поларитет батерија или их замените новим АА батеријама. |
| Нетачна очитавања обртног момента. | Wrench needs calibration or improper usage. | Ensure proper technique. Consider professional recalibration. |
| No audible/vibration feedback. | Feedback settings disabled or malfunction. | Check user manual for enabling feedback. Contact support if issue persists. |
Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | VP18-340-01 |
| Дриве Сизе | 1/2 инча |
| Распон обртног момента | 12.5–250.8 ft-lb / 17–340 Nm |
| Прецизност | ±2% |
| Меасуремент Унитс | ft-lb, in-lb, Nm, kg-cm |
| Повратне информације | Audible, LED, Vibration |
| Радни режими | Врх, стаза |
| Извор напајања | 2 АА батерија (укључено) |
| Материјал | 40 CR, Chrome Molybdenum Steel, Chrome Vanadium Steel |
| Тежина артикла | 5.29 фунти |
| Укључене компоненте | 1* digital torque wrench, 1*1/2 to 3/8" Adapter, 1*1/2'' 125mm Extension Bar |
Гаранција и подршка
This VANPO Digital Torque Wrench is backed by a 36-month manufacturer warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official VANPO webсајту.
A Certificate of Calibration Report is included with your product, detailing the device's accuracy at the time of manufacture.
Видео снимци производа
Кеи Феатурес Оверview
Видео: Оверview of the key features and functionalities of the VANPO Digital Torque Wrench.
Detailed Features Demonstration
Video: A demonstration of the various features of the VANPO Digital Torque Wrench, including display and controls.