B2 Audio B2-RIOT10-D2

B2 Audio Riot 10-inch Subwoofer Instruction Manual

Model: B2-RIOT10-D2 | Brand: B2 Audio

1. Увод

Thank you for choosing the B2 Audio Riot 10-inch Subwoofer (Model B2-RIOT10-D2). This high-performance component subwoofer is engineered to deliver powerful and precise bass for your car audio system. With 750W RMS power handling and a dual 2-Ohm, 3-inch voice coil, it offers robust and efficient sound reproduction. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your subwoofer.

2. Безбедносне информације

Please read all instructions carefully before installing and operating your B2 Audio Riot subwoofer. Failure to follow these guidelines may result in damage to the product, your vehicle, or personal injury. Keep this manual for future reference.

  • Увек искључите акумулатор возила пре почетка било каквих електричних радова.
  • Ensure proper wiring and connections to prevent short circuits and electrical hazards.
  • Безбедно монтирајте сабвуфер како бисте спречили померање током рада возила.
  • Избегавајте излагање сабвуфера прекомерној влази или екстремним температурама.
  • Do not operate the subwoofer beyond its rated power handling to prevent damage.
  • Потражите стручну инсталацију ако нисте сигурни у било који део процеса.

3. Шта је у кутији

Upon unpacking your B2 Audio Riot 10-inch Subwoofer, please ensure all items are present and in good condition:

  • (1) B2 Audio Riot 10" D2 Subwoofer
  • Упутство за употребу
  • B2 Audio Sticker (as shown in unboxing video)

4. Спецификације

ФеатуреСпецификација
БрандB2 Audio
Број моделаB2-RIOT10-D2
Спеакер ТипеСубвоофер
Пречник сабвуфера10 инча
РМС управљање напајањем750 Ваттс
Максимална снага руковања1500 Ваттс
ИмпедансаДуал 2 Охма
Пречник звучне завојнице3 инча
Фреквенцијски одзив34.9 Hz (Fs)
Осетљивост84.9 дБ
Магнет Веигхт240 Ounces (Entire Assembly)
Дисплацемент Волуме5.2 L / 0.19 Cu.Ft
Укупан пречник10.83" / 275 mm
Монтажни пречник9.25" / 235 mm
Укупна дубина7" / 178 mm
Технологија повезивањаВиред
БојаЦрно
Тежина артикла27.1 фунти

5. Подешавање и инсталација

Proper installation is crucial for the performance and longevity of your B2 Audio Riot subwoofer. Follow these general guidelines:

5.1 Препоруке за кућиште

The B2 Audio Riot subwoofer is designed for optimal performance in specific enclosure types:

  • Запечаћено кућиште: Recommended volume of 0.6 cubic feet.
  • Ported Compact Enclosure: Recommended volume of 1.23 cubic feet, tuned to 38 Hz.
  • Larger Ported Enclosure: Recommended volume of 1.76 cubic feet.

These recommendations ensure the subwoofer operates within its optimal frequency range and power handling capabilities.

5.2 Ожичење

The B2 Audio Riot 10-inch subwoofer features a dual 2-Ohm voice coil. Ensure your amplifier is stable at the impedance created by your wiring configuration. Common wiring configurations include:

  • Паралелно ожичење: Connect both voice coils in parallel for a 1-Ohm load.
  • Ожичење серије: Connect both voice coils in series for a 4-Ohm load.

Always use appropriate gauge speaker wire (8 GA recommended for push terminals) and ensure all connections are secure and free from shorts.

5.3 Монтажа

Securely mount the subwoofer within its enclosure using appropriate fasteners. Ensure there is adequate clearance for the subwoofer's excursion and proper ventilation for the motor structure.

B2 Audio Riot 10-inch Subwoofer front view

Слика 1: Предња страна view of the B2 Audio Riot 10-inch Subwoofer, showcasing its robust cone and surround.

B2 Audio Riot 10-inch Subwoofer angled view

Слика 2: Под углом view of the B2 Audio Riot 10-inch Subwoofer, highlighting the white basket and black cone.

B2 Audio Riot 10-inch Subwoofer terminals

Figure 3: Close-up of the push terminals on the B2 Audio Riot 10-inch Subwoofer, showing the wiring connections.

B2 Audio Riot 10-inch Subwoofer side view

Слика 4: Страна view of the B2 Audio Riot 10-inch Subwoofer, revealing the robust basket and motor structure.

B2 Audio Riot 10-inch Subwoofer back view

Слика 5: Позади view of the B2 Audio Riot 10-inch Subwoofer, showing the magnet and cooling vents.

6. Операција

The B2 Audio Riot subwoofer is designed for high efficiency and powerful bass output. To achieve the best performance:

  • Усклађивање снаге: While rated at 750W RMS, the subwoofer's efficient design means it can produce significant output with less power. However, it is built to handle up to 1500W Max.
  • Подешавање појачања: Properly set your amplifier's gain to match the output voltage of your head unit. Avoid setting the gain too high, which can lead to clipping and damage to the subwoofer.
  • Период провале: Allow a break-in period of several hours of moderate listening before pushing the subwoofer to its limits. This allows the suspension components to loosen and perform optimally.
  • Фреквенцијски опсег: The subwoofer operates effectively within a frequency range of 10 Hz to 500 Hz. Use a low-pass filter on your amplifier or head unit to send only the appropriate low frequencies to the subwoofer.

Video 1: An unboxing and test video of the B2 Audio RIOT12 Subwoofer by Big Jeff Audio, demonstrating its features and performance. This video provides visual details of the subwoofer's construction and shows it in operation during a flex test.

7. Одржавање

To keep your B2 Audio Riot subwoofer in excellent condition and ensure long-lasting performance:

  • Редовно чишћење: Gently wipe the cone and surround with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or excessive moisture.
  • Прегледајте везе: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
  • Проверите монтажу: Verify that the subwoofer remains securely mounted within its enclosure. Tighten any loose screws if necessary.
  • Avoid Over-Excursion: While the subwoofer is designed for high excursion, prolonged operation at extreme levels can reduce its lifespan. Listen for signs of distortion and reduce volume if necessary.

КСНУМКС. Решавање проблема

If you experience issues with your B2 Audio Riot subwoofer, refer to the following common problems and solutions:

  • Нема звука:
    • Check all power and ground connections to the ampлифиер и субвоофер.
    • Потврдите ampУређај за спасавање је укључен и није у режиму заштите.
    • Ensure the audio source is functioning correctly and signal cables are connected.
  • Изобличен звук:
    • Смањите ampпојачање лифтера или јачина звука главне јединице.
    • Check for proper low-pass filter settings.
    • Inspect speaker wires for shorts or damage.
    • Ensure the subwoofer is not over-excurting.
  • прегревање:
    • Осигурајте одговарајућу вентилацију око ampлифиер и субвоофер.
    • Verify the impedance load matches the ampспособности спасиоца.
    • Reduce prolonged high-volume operation.

If the problem persists, consult a professional car audio technician or contact B2 Audio support.

9. Гаранција и подршка

9.1 Информације о гаранцији

The B2 Audio Riot 10-inch Subwoofer is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims procedures, please refer to the official B2 Audio webсајт или директно контактирајте њихову корисничку службу. Сачувајте доказ о куповини ради потврде гаранције.

9.2 Корисничка подршка

For any questions, technical assistance, or support regarding your B2 Audio Riot subwoofer, please visit the official B2 Audio Store or contact their customer support team:

© 2026 B2 Audio. All rights reserved.