Pedrollo PKm 60/24CL Hydropneumatic Pump User Manual

Увод

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Pedrollo PKm 60/24CL Hydropneumatic Pump. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.

Безбедносне информације

УПОЗОРЕЊЕ: Непоштовање ових безбедносних упутстава може довести до струјног удара, пожара, озбиљних повреда или смрти.

• Увек искључите напајање пре него што извршите било какво одржавање или сервисирање.
• Ensure the electrical supply matches the pump's requirements (voltagе, фреквенција).
• All electrical connections must be performed by a qualified electrician and comply with local codes.
• Do not operate the pump without water, as this can cause severe damage.
• Држите децу и неовлашћено особље даље од пумпе током рада.
• Install the pump in a well-ventilated area, protected from direct sunlight and freezing temperatures.
• Осигурајте правилно уземљење јединице.

Производ је завршенview

The Pedrollo PKm 60/24CL is a compact hydropneumatic pump system designed to maintain constant water pressure in domestic and small commercial applications. It integrates a 0.50 HP pump with a 24-liter pre-charged tank, ensuring efficient and reliable water supply.

Image: Pedrollo PKm 60/24CL Hydropneumatic Pump. This image shows the complete hydropneumatic unit, featuring the blue 24-liter tank, the electric pump mounted on top, and the flexible connection hose.

Кључне компоненте:

• електрична пумпа: 0.50 HP motor for efficient water transfer.
• Pressure Tank: 24-liter capacity, pre-charged to maintain stable water pressure.
• Прекидач притиска: Automatically controls pump operation based on system pressure.
• Манометар: Displays current system pressure.
• Flexible Connection Hose: Повезује пумпу са резервоаром под притиском.

Подешавање и инсталација

Proper installation is crucial for the pump's performance and longevity. If you are unsure about any step, consult a qualified professional.

1. Локација: Choose a dry, well-ventilated area, protected from frost and direct sunlight. The pump should be installed as close as possible to the water source.
2. Монтажа: Secure the unit on a stable, level surface to minimize vibration and noise.
3. Водоводне везе:
   • Connect the suction pipe from the water source to the pump's inlet. Ensure the suction line is airtight to prevent air ingress.
   • Connect the discharge pipe from the pump's outlet to your water distribution system.
   • Use appropriate fittings and sealants to prevent leaks.
   • Install a check valve on the suction line if the water source is below the pump.
4. Електрични прикључак:
   • Ensure the power supply matches the pump's specifications (voltagе, фреквенција).
   • Connect the pump to a dedicated, properly grounded electrical circuit with appropriate overcurrent protection.
   • All electrical work must comply with local electrical codes and be performed by a licensed electrician.
5. Пуњење пумпе:
   • Before initial startup, remove the priming plug (usually on top of the pump body).
   • Напуните пумпу цasing completely with clean water until it overflows.
   • Чврсто вратите чеп за пуњење.

Упутство за употребу

The Pedrollo PKm 60/24CL operates automatically to maintain constant water pressure.

1. Прво покретање:
   • After priming, open a faucet in your system to allow air to escape.
   • Turn on the electrical power to the pump.
   • The pump will start and build pressure. Once the cut-off pressure is reached, the pump will stop.
   • Close the faucet. The pump should remain off.
2. Аутоматски рад:
   • When water is drawn from the system (e.g., opening a faucet), the pressure will drop.
   • The pressure switch will detect this drop and automatically start the pump.
   • The pump will run until the system pressure reaches the pre-set cut-off pressure, then it will stop.
   • This cycle ensures a continuous and stable water supply.
3. Надгледање: Periodically check the pressure gauge to ensure the system is operating within expected pressure ranges.

Одржавање

Regular maintenance ensures optimal performance and extends the life of your hydropneumatic pump.

• Проверите да ли има цурења: Regularly inspect all plumbing connections for leaks. Tighten or repair as necessary.
• Tank Air Pressure: The pressure tank contains a pre-charged air bladder. Periodically check the air pressure in the tank (when the pump is off and system pressure is zero) and recharge if necessary according to manufacturer specifications (typically 1.5 to 2 bar, or 22-29 PSI, but refer to tank label).
• чистоћа: Keep the pump and motor clean and free from dust and debris to ensure proper ventilation.
• Зимовање (ако је применљиво): If the pump is in an area subject to freezing temperatures, drain the pump and pipes completely to prevent damage from ice expansion.
• Електричне везе: Periodically check electrical connections for corrosion or looseness.

Решавање проблема

Ако проблеми и даље постоје након покушаја ових решења, обратите се квалификованом сервисеру.

Спецификације

• Модел: Pedrollo PKm 60/24CL
• Снага мотора: 0.50 ХП
• Капацитет резервоара: 24 литара
• Извор напајања: Електрични кабл
• Материјал: Plastic (Note: While "Plastic" is listed, key pump components are typically cast iron or stainless steel for durability.)
• Стил: Индустриал
• апликација: Domestic water supply, irrigation systems, pressurization.
• Automatic System: Maintains constant pressure without manual operation.

Гаранција и подршка

For warranty information, technical support, or to locate authorized service centers, please refer to the documentation provided with your purchase or visit the official Pedrollo webсајт. Сачувајте доказ о куповини за потребе гаранције.

Pedrollo Official Webсајт: ввв.педролло.цом