1. Производ је готовview
The MOUNTUP Ultrawide Monitor Wall Mount (MU-WM49) is designed to securely hold ultrawide and standard monitors ranging from 22 to 49 inches. This heavy-duty mount supports monitors weighing between 4.4 lbs (2 kg) and 44 lbs (20 kg) for flat screens, and 4.4 lbs (2 kg) and 33 lbs (15 kg) for curved screens. It features full motion capabilities, allowing for optimal viewing angle adjustments and space-saving benefits.
Image 1.1: The MOUNTUP Ultrawide Monitor Wall Mount with a curved monitor, showcasinг његов дизајн и функционалност.
2. Безбедносне информације
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage.
- Капацитет тежине: Do not exceed the maximum weight capacity of 44 lbs (20 kg) for flat monitors or 33 lbs (15 kg) for curved monitors.
- Тип зида: This mount is designed for installation on wood studs, brick walls, or concrete walls. DO NOT mount on drywall alone.
- ВЕСА компатибилност: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm. If your monitor does not have VESA holes, a VESA adapter (not included) may be required.
- Скупштина: За безбедну инсталацију препоручују се две особе.
- Алати: Користите одговарајуће алате за инсталацију.
Image 2.1: Diagram illustrating compatible wall types (wood stud, brick, concrete) and explicitly warning against mounting on drywall alone.
3. Спецификације
| Феатуре | Спецификација |
|---|---|
| Бранд | МОУНТУП |
| Модел | MU-WM49 |
| Компатибилност величине монитора | 22 - 49 инча |
| Weight Capacity (Flat Monitors) | 4.4 - 44 lbs (2 - 20 kg) |
| Weight Capacity (Curved Monitors) | 4.4 - 33 lbs (2 - 15 kg) |
| ВЕСА компатибилност | 75к75мм, 100к100мм |
| Тип монтаже | Валл Моунт |
| Мовемент Типе | Tilt, Rotate, Swivel, Height Adjust, Full Motion |
| Угао нагиба | +90° / -45° |
| Угао окретања | ±90° (at wall plate), ±135° (at arm joint), ±90° (at VESA plate) |
| Ротација | 360° (for monitors under 42"), ±10° (for 42"-49" monitors) |
| Опсег подешавања висине | 13 инча |
| Продужетак са зида | 4.2 инча (увучено) до 23.4 инча (испружено) |
| Материјал | легирани челик |
| Боја | Црно |
| Тежина артикла | 7.94 фунти (3.6 кг) |
Image 3.1: Visual representation of the mount's compatibility, including screen size range, weight limits for flat and curved monitors, and VESA patterns.
4. Подешавање и инсталација
Follow these steps carefully to install your MOUNTUP Monitor Wall Mount. All necessary mounting hardware and detailed instructions are included with your product.
4.1. Контролна листа пре инсталације
- Verify your monitor's weight and VESA pattern are within the mount's specifications.
- Identify a suitable wall location (wood stud, brick, or concrete).
- Gather necessary tools (e.g., drill, stud finder, level, screwdriver, Allen wrenches).
- Ensure all parts listed in the package contents are present.
4.2. Монтирање зидне плоче
- Locate a wood stud using a stud finder, or identify a solid brick/concrete area.
- Mark the desired height for the wall plate. Use a level to ensure it is straight.
- Drill pilot holes according to the wall plate's screw pattern and your wall type.
- Secure the wall plate to the wall using the provided lag bolts.
4.3. Attaching the VESA Plate to Your Monitor
- Пажљиво поставите монитор лицем надоле на меку, чисту површину.
- Attach the detachable VESA plate to the back of your monitor using the appropriate screws and spacers.
- For monitors between 42" and 49" that will be used in landscape orientation, tighten the rotation screw on the VESA plate to secure the monitor's rotation to ±10° before hanging. For monitors under 42", remove this screw for full 360° rotation.
Image 4.1: Guide on how to adjust the rotation angle for monitors based on their size (under 42" for 360° rotation, 42"-49" for ±10° rotation).
4.4. Hanging the Monitor
- With assistance, carefully lift the monitor and hook the VESA plate onto the arm mechanism.
- Secure the monitor to the arm using the safety screws or clips as indicated in the detailed manual.
5. Упутство за употребу
Once installed, your MOUNTUP Monitor Wall Mount offers extensive flexibility for positioning your screen.
5.1. Подешавање положаја монитора
- Подешавање висине: The gas spring arm allows for smooth vertical movement within a 13-inch range. Gently push or pull the monitor to the desired height.
- Продужење и увлачење: Extend the arm up to 23.4 inches from the wall or retract it to a minimum of 4.2 inches.
- Нагиб: Adjust the monitor's vertical angle from +90° (upward) to -45° (downward) to reduce glare or optimize viewинг.
- Окретни: Pivot the monitor horizontally at various points: ±90° at the wall plate, ±135° at the arm joint, and ±90° at the VESA plate.
- ротација: Rotate the monitor 360° for portrait or landscape viewing (for monitors under 42"). For larger monitors (42"-49"), rotation is limited to ±10°.
Image 5.1: Illustration of the mount's ability to freely position the screen, highlighting the 13-inch height range, 23.4-inch maximum extension, and 4.2-inch retraction from the wall.
Image 5.2: Visual guide to the mount's full motion capabilities, detailing swivel angles at different joints, tilt range, and 360° rotation.
5.2. Подешавање затезања
The gas spring tension may need adjustment to properly support your monitor's weight. If the monitor rises too easily or drops down, adjust the tension screw located on the arm.
- Monitor Raises Up (too light): Turn clockwise (-) to reduce tension for a lighter monitor.
- Monitor Drops Down (too heavy): Turn counter-clockwise (+) to increase tension for a heavier monitor.
Keep the arm in a horizontal position while adjusting tension. Turn the screw in small increments (e.g., 360° each time) and test the monitor's movement until it holds its position stably.
Image 5.3: Detailed instructions on how to adjust the tension of the monitor arm using an Allen wrench to ensure proper weight support.
5.3. Менаџмент каблова
The mount features integrated cable management channels to keep your workspace tidy and free of clutter. Route your monitor's power and video cables through these channels along the arm.
Image 5.4: The monitor arm with cables neatly routed through its integrated management system, contributing to a clean desk setup.
6. Одржавање
Regular maintenance ensures the longevity and safe operation of your monitor wall mount.
- Чишћење: Обришите носач меком крпомamp крпу. Избегавајте абразивна средства за чишћење или раствараче.
- инспекција: Периодично проверавајте све завртње и вијке да бисте били сигурни да су затегнути. По потреби поново затегните.
- подмазивање: No lubrication is typically required for the moving parts. If movement becomes stiff, contact support.
КСНУМКС. Решавање проблема
If you encounter issues with your MOUNTUP Monitor Wall Mount, refer to the following common solutions:
- Monitor Sags or Does Not Stay in Position: Adjust the gas spring tension as described in Section 5.2. Ensure the monitor's weight is within the specified range.
- Тешкоће са померањем руке: Check if the tension is too high (if the monitor is too light) or if any bolts are overtightened. Adjust tension or loosen bolts slightly.
- Monitor Not Level: Ensure the VESA plate is securely attached to the monitor and the arm. For monitors 42"-49", ensure the rotation screw is tightened to prevent unwanted rotation beyond ±10°.
- Планина се осећа нестабилно: Re-check all wall mounting screws and bolts for tightness. Confirm the mount is installed on a solid wall structure (wood stud, brick, or concrete) and not drywall alone.
8. Гаранција и подршка
MOUNTUP provides reliable support for its products. If you require M6 or M8 screws for TV mounting, or have any questions or concerns regarding installation, operation, or parts, please contact MOUNTUP customer support. Refer to the product packaging or the MOUNTUP official webсајт за контакт информације.