Важне информације о безбедности
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Овај грејач је дизајниран за hardwired installation only. It is not a plug-in unit.
- Овај грејач does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Инсталацију мора да изврши квалификовани електричар у складу са свим националним и локалним електричним прописима.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Подешавање и инсталација
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Монтажа
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Електрични прикључак
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Упутство за употребу
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Укључено: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Подешавање термостата: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Тих рад: This convector heater operates silently, providing consistent warmth without fan noise.
- Почетна употреба: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Одржавање
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Чишћење: Периодично чистите спољашњост грејача меком крпомamp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Уклањање прашине: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- инспекција: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Не ометајте: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Решавање проблема
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Грејач се не укључује. | Нема напајања. Термостат је постављен прениско. Faulty wiring or thermostat. | Проверите прекидач. Повећајте подешавање термостата. Консултујте квалификованог електричара. |
| Грејач производи недовољно топлоте. | Величина собе превазилази капацитет грејања. Проток ваздуха је ометан. Проблем са калибрацијом термостата. | Ensure heater matches room size (up to 150 sq ft). Уклоните препреке са решетки. Recalibrate or replace thermostat. |
| Необични мириси током рада. | Initial burn-off of manufacturing residues. Накупљање прашине на грејном елементу. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
If the problem persists after attempting these solutions, contact Stelpro customer support or a qualified electrician.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | Стелпро |
| Број модела | ASHC1502WCW |
| Ватtage | 1500W (at 240V) / 1125W (at 208V) |
| Волtage | 240 Волтс |
| Ampераге | 6.25 Amps |
| Димензије производа (Д x Ш x В) | 3.94" x 28.63" x 17.56" (101 mm x 727 mm x 446 mm) |
| Тежина артикла | 15.7 фунти |
| Покривеност грејања | Up to 150 sq feet |
| Посебне карактеристике | Energy Efficient, Fast Heating, Noiseless |
| Форм Фацтор | кабинет |
| Боја | Бела |
| Тип монтаже | Валл Моунт |
| Врста горива | Електрични |
| Унутрашња/спољна употреба | Индоор |
| УПЦ | 626296203491 |
Гаранција
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5-годишња ограничена гаранција на целој јединици.
- Доживотна гаранција на грејном елементу.
- 3 године гаранције on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro webсајту.
Подршка
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro webсајт: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.