MAIWO Dual Bay SATA RAID Enclosure User Manual

1. Увод

This manual provides detailed instructions for the installation, configuration, and operation of your MAIWO Dual Bay SATA RAID Enclosure. This device is designed to house two 3.5-inch SATA HDDs or SSDs, offering versatile storage solutions with multiple RAID modes and high-speed data transfer capabilities.

2. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• MAIWO Dual Bay RAID Enclosure
• USB Cable (2-in-1 USB-A to USB-C)
• Адаптер за напајање (12В/4А)
• Screws for HDD installation
• Шрафцигер
• Кориснички приручник (овај документ)

Слика 2.1: Садржај пакета

3. Производ је готовview

Familiarize yourself with the components and interfaces of the MAIWO Dual Bay SATA RAID Enclosure.

Figure 3.1: Rear Panel and Components

• Aluminium Alloy Housing: Durable outer casing for protection and heat dissipation.
• HDD1/HDD2 Indicators: LED lights indicating the status of each installed hard drive.
• RAID Indicator: LED light indicating the current RAID mode status.
• ABS Bracket: Internal plastic bracket for securing hard drives.
• Дугме за ресетовање: Used for resetting RAID configurations.
• Индикатор напајања: ЛЕД светло које показује статус напајања.
• Прекидач за напајање (УКЉУЧЕНО/ИСКЉУЧЕНО): Controls the power to the enclosure.
• Power Input Interface (DC 12V): Повезује се са приложеним адаптером за напајање.
• RAID Switch: Used to select the desired RAID mode (Normal, JBOD, RAID 0, RAID 1).
• Type-C Port (5Gbps USB 3.1): Connects the enclosure to your computer for data transfer.

4. Подешавање и инсталација

Follow these steps to install your 3.5-inch SATA HDDs/SSDs into the enclosure and connect it to your computer. For 2.5-inch drives, a separate mounting bracket is required (not included).

1. Step 1: Remove the Bracket
   Gently pull out the internal orange ABS bracket from the enclosure.
2. Корак 2: Инсталирајте чврсте дискове
   Place your 3.5-inch SATA HDD(s) into the bracket. Ensure they are seated correctly.
3. Step 3: Secure Hard Drives
   Use the provided screws and screwdriver to secure the hard drives to the bracket from the bottom.
4. Step 4: Insert Bracket into Enclosure
   Slide the bracket with the installed hard drives back into the aluminum alloy housing until it clicks into place.
5. Корак 5: Повежите напајање
   Connect the provided power adapter to the DC 12V input interface on the rear panel, then plug it into a power outlet.
6. Корак 6: Повежите се са рачунаром
   Connect the USB-C port on the enclosure to your computer using the provided USB cable.
7. Корак 7: Укључите напајање
   Flip the ON/OFF switch to the 'ON' position. The power indicator LED will light up.

Figure 4.1: Hard Drive Installation Steps

5. Operating Modes (RAID Configuration)

The MAIWO Dual Bay SATA RAID Enclosure supports four operating modes: NORMAL, JBOD, RAID 0, and RAID 1. Always back up your data before changing RAID modes, as data loss may occur.

Figure 5.1: RAID Mode Overview

5.1. Changing RAID Modes

1. Искључивање: Ensure the enclosure is powered off and disconnected from the computer.
2. Изаберите режим: Use a small tool (like the provided screwdriver) to adjust the RAID switch on the rear panel to your desired mode (Normal, JBOD, RAID 0, or RAID 1). Refer to Figure 3.1 for the switch location.
3. Притисните Ресет: While holding down the Reset button, power on the enclosure. Continue holding the Reset button for approximately 5-10 seconds until the RAID indicator light changes or flashes, then release.
4. Повежите се са рачунаром: Connect the enclosure to your computer. The system will detect the new RAID configuration.
5. Initialize/Format: For new drives or after changing RAID modes, you may need to initialize and format the drives through your operating system's Disk Management (Windows) or Disk Utility (macOS).

5.2. RAID Mode Descriptions

• Нормал: Each hard drive operates independently. Two separate drive letters will appear on your computer.
• JBOD (Just a Bunch Of Disks) Mode: The two hard drives are combined into a single large volume. Data is written sequentially across the drives. If one drive fails, all data may be lost.
• RAID 0 (Striping) Mode: Data is split and written across both hard drives simultaneously. This mode offers the highest performance and combines the capacity of both drives, but provides no data redundancy. If one drive fails, all data is lost.
• RAID 1 (Mirroring) Mode: Data is written identically to both hard drives. This mode provides data redundancy; if one drive fails, your data is still safe on the other drive. The total usable capacity is equal to the capacity of a single drive.

6. Пренос података

The enclosure supports USB 3.1 Gen 1 (USB 3.0) with data transfer speeds up to 5Gbps. Actual speeds may vary depending on the installed hard drives, computer's USB port, and operating system.

Figure 6.1: High-Speed Data Transfer

7. Паметна контрола температуре

The MAIWO enclosure features a smart temperature-controlled fan designed to maintain optimal operating temperatures for your hard drives, extending their lifespan and ensuring stable performance.

• When the internal temperature is below or reaches 28°C, the fan operates at a very low RPM or turns off.
• When the internal temperature rises above 28°C, the fan automatically turns on to increase cooling.

Figure 7.1: Smart Temperature Control Mechanism

8. Компатибилност

8.1. Hard Drives

Supports 3.5-inch SATA HDDs/SSDs. For 2.5-inch drives, a mounting bracket is required (not included).

8.2. Уређаји

Compatible with devices featuring USB-A or USB-C ports, including:

• PCs (Desktop, Laptop)
• Tablets (iPad, Android tablets)
• Конзоле за игре
• Рутери
• Паметни телевизори

8.3. Operating Systems

Supports various operating systems, including:

• Виндовс
• мацОС
• Линук
• Андроид
• Цхроме ОС
• Хармони ОС
• иПадОС
• иОС

Слика 8.1: Широка компатибилност

9. Одржавање

• Чишћење: Користите меку, суву крпу за чишћење спољашњости кућишта. Не користите течна средства за чишћење или раствараче.
• вентилација: Ensure the enclosure's ventilation holes are not obstructed to allow for proper airflow and cooling.
• Ажурирања фирмвера: Check the official MAIWO website periodically for any available firmware updates for your enclosure.
• Безбедно уклањање: Always safely eject the enclosure from your computer before disconnecting the USB cable or powering off the device to prevent data corruption.

КСНУМКС. Решавање проблема

• Enclosure not detected by computer:
  • Уверите се да је адаптер за напајање безбедно повезан и да је кућиште укључено.
  • Проверите да ли је УСБ кабл правилно повезан и са кућиштем и са рачунаром.
  • Покушајте са другим УСБ портом на рачунару.
  • Проверите да ли су чврсти дискови правилно инсталирани и смештени у кућишту.
• Hard drives not appearing after RAID configuration:
  • Ensure you followed the RAID mode change procedure correctly, including holding the Reset button during power-on.
  • Access your operating system's Disk Management (Windows) or Disk Utility (macOS) to initialize and format the new RAID volume.
• Споре брзине преноса података:
  • Ensure you are connected to a USB 3.0 (or higher) port on your computer. USB 2.0 ports will limit speeds to 480Mbps.
  • The speed of the installed hard drives can also limit transfer rates.
  • Check for other devices consuming USB bandwidth.
• Прегревање кућишта:
  • Ensure the ventilation holes are clear and not obstructed.
  • Place the enclosure in a well-ventilated area.
  • The smart fan should activate when temperatures rise above 28°C. If it does not, contact support.
• Hard drives do not enter sleep mode:
  • This behavior has been reported by some users. Ensure your operating system's power management settings are configured to allow hard drives to spin down.
  • If the issue persists, it may be a characteristic of the enclosure's firmware. Contact MAIWO support for potential solutions or firmware updates.

11. Спецификације

12. Гаранција и подршка

12.1. Информације о гаранцији

MAIWO provides a warranty for this product. Please review следећи термини:

• Shipment received with visible damages must be reported within three (3) calendar days of delivery.
• Returns with missing parts (accessories, manuals, packaging) will not be processed until all parts are received.
• Customer is responsible for return shipping expenses and restocking fees unless otherwise stated. Replacements will be shipped at MAIWO's expense.
• Return products must be shipped with sufficient packaging to prevent damage during transit. Damages due to insufficient packaging may result in rejection or charges.
• Refunds will be issued to the original payment method after the warehouse receives, inspects, and processes the return in like-new condition.

12.2. Техничка подршка

For technical assistance, troubleshooting, or warranty claims, please contact MAIWO customer support. Refer to the official MAIWO webсајт или вашу документацију о куповини за контакт податке.