Увод
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
Важне информације о безбедности
- Ризик од струјног удара: Always disconnect power before installing or replacing the bulb.
- Унутрашња/спољашња употреба: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- Волtage: Уверите се да је уређај волtage is 120V. Do not use with incompatible voltage.
- Затамњење: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- температура: Do not operate outside the specified temperature range of -20°C to +45°C.
- Руковање: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- одлагање: Dispose of LED bulbs according to local regulations.
Подешавање и инсталација
- Искључивање: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Уклоните стару сијалицу: Carefully unscrew the existing bulb from the fixture.
- Убаците нову сијалицу: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Укључено: Вратите напајање на уређај.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
Операција
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- Контрола осветљења: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- Квалитет светлости: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- Ширина снопа: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
Одржавање
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- Чишћење: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Замена: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
Решавање проблема
If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:
- Сијалица не светли:
- Уверите се да је напајање уређаја укључено.
- Проверите да ли је сијалица чврсто заврнута.
- Test the bulb in another working fixture to confirm it is not faulty.
- Verify the fixture itself is operational.
- Flickering or Inconsistent Light:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- Уверите се да је волtage supply is stable at 120V.
- Bulb is Too Dim or Too Bright:
- If using a dimmer, adjust the dimmer setting.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | С12535 |
| Ватtage | 5 вати (еквивалентно 40 В жаруља) |
| Осветљеност | 425 лумена |
| Температура боје | 5000K (природно бела) |
| Булб Схапе | СТ19 |
| Басе Типе | Е26 Средња база |
| Индекс приказивања боја (ЦРИ) | 92 |
| Беам Англе | 300 степени |
| Волtage | 120В |
| Диммабле | Yes (with compatible 120V dimmers) |
| Ратед Лифе | 15,000 сата |
| Енвиронментал Ратинг | Wet Location Rated (IP65), Enclosed Fixture Rated |
| Радна температура | -20°Ц до +45°Ц |
| Цертификати | cULus, FCC, RoHS |
| Фактор снаге | 0.7 |
| Фреквенција | 60Хз |
| Тежина предмета (паковање од 6 комада) | 1.06 фунти |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
Гаранција и подршка
The Satco S12535 ST19 LED Light Bulb is backed by a Двогодишња гаранција произвођача од дана куповине.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco webсајт за актуелне контакт информације.
Webсајт: ввв.сатцо.цом