AOPUTTRIVER AP-9000F Hot Wire Anemometer User Manual

1. Увод и крајview

The AOPUTTRIVER AP-9000F is a professional handheld hot wire anemometer designed for precise measurement of air velocity, airflow volume (CFM/CMM), and air temperature. This device is equipped with a retractable sensor probe, making it suitable for various applications, including HVAC system diagnostics, environmental monitoring, and industrial air flow analysis. This manual provides essential information for the safe and effective operation of your AP-9000F anemometer.

2. Шта је у кутији

Приликом распакивања, проверите да ли су све доле наведене ставке присутне и у добром стању:

• AP-9000F Hot Wire Anemometer Unit
• Упутство за употребу
• Кабл за податке типа Ц

3. Карактеристике производа

The AP-9000F anemometer offers a range of features designed for precision and convenience:

• 3-у-1 мерење: Accurately measures wind speed (m/s, km/h, ft/min, knots, mph), airflow (CFM/CMM), and wind temperature (°C/°F).
• Retractable Sensor Probe: Features a flexible, extendable probe tip for convenient measurements in confined or hard-to-reach spaces, such as air conditioning vents. Probe dimensions: 298.5 × 40.84 × 23.7 mm.
• ЛЦД екран: A clear, backlit LCD presents wind speed (Max, Min, Real-time), airflow, temperature, and humidity data. Includes anti-interference buttons and a low battery indicator.
• Интерфејс типа Ц: Equipped with a Type-C charging port and powered by a 1000mAh lithium-ion battery. Supports an optional auto-shutdown function.
• Широка примена: Suitable for environmental measurements, air transportation, and air conditioning monitoring systems.

4. Подешавање

4.1 Пуњење батерије

The AP-9000F is powered by a built-in 1000mAh lithium-ion battery. Before first use, or when the low battery indicator appears on the LCD, charge the device using the provided Type-C data cable.

• Connect the Type-C cable to the charging port on the anemometer and the other end to a standard USB power adapter (not included).
• Потпуно пуњење обично траје 2 до 3 сата.
• Напомена: The device cannot be turned on or operated while it is charging.

4.2 Extending the Sensor Probe

The hot wire sensor is located at the tip of the retractable probe. Carefully extend the probe to the desired length for measurement. The probe can be rotated 360 degrees for optimal positioning.

• Gently pull the probe from the main unit to extend it.
• Adjust the angle of the probe tip as needed.
• After use, retract the probe back into the unit for protection.

5. Упутство за употребу

5.1 Распоред уређаја и дугмад

• Power Button (Red Circle): Притисните да бисте укључили или искључили уређај.
• Дугме МОДЕ: Switches between different measurement modes (e.g., wind speed, airflow).
• Дугме УНИТ: Changes the unit of measurement for wind speed (m/s, km/h, ft/min, knots, mph) or airflow (CFM, CMM).
• СЕТ дугме: Used to set the air volume area for accurate CFM/CMM calculations.
• Дугме МАКС/МИН: Toggles between maximum, minimum, and real-time values on the display.
• Дугме ХОЛД: Замрзава тренутно очитавање на екрану. Притисните поново да бисте отпустили.
• Дугме °Ц/°Ф: Switches the temperature unit between Celsius and Fahrenheit.

5.2 Basic Measurement Procedure

1. Укључено: Притисните тастер Дугме за напајање to turn on the anemometer. The LCD will illuminate.
2. Extend Probe: Carefully extend the sensor probe and position it in the airflow you wish to measure. Ensure the sensor tip is fully exposed to the air stream.
3. Изаберите режим: Притисните тастер Дугме МОДЕ to select between wind speed, airflow, or temperature measurement.
4. Изаберите јединицу: Притисните тастер УНИТ тастер to choose your preferred unit (e.g., m/s, CFM, °C).
5. Set Area (for Airflow): If measuring airflow (CFM/CMM), press the СЕТ дугме to input the cross-sectional area of the duct or vent. Refer to the specifications for area input range.
6. Очитај мерење: The current readings will be displayed on the LCD.
7. Задржавање података: Притисните тастер ХОЛД дугме to freeze the current reading. Press again to resume live measurement.
8. Max/Min/Avg: Користите Дугме МАКС/МИН да view the maximum, minimum, or average readings recorded during the measurement session.

6. Одржавање

6.1 Чишћење уређаја

• Обришите главну јединицу меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
• For the sensor probe, gently clean any dust or debris. Avoid touching the delicate hot wire sensor directly.

6.2 Нега и складиштење батерије

• Редовно пуните батерију, чак и ако се уређај не користи често, како бисте одржали њено здравље.
• Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure the sensor probe is fully retracted and protected during storage.

КСНУМКС. Решавање проблема

If you encounter issues with your AP-9000F, please refer to the following common problems and solutions:

8. Спецификације

Detailed technical specifications for the AOPUTTRIVER AP-9000F Hot Wire Anemometer:

9. Гаранција и подршка

9.1 Информације о гаранцији

AOPUTTRIVER products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, or visit the official AOPUTTRIVER webсајт за више детаља.

9.2 Корисничка подршка

For technical assistance, troubleshooting, or inquiries regarding your AP-9000F Hot Wire Anemometer, please contact AOPUTTRIVER customer support. Contact information can typically be found on the product packaging, the official AOPUTTRIVER webсајту или путем ваше платформе за куповину.

When contacting support, please have your product model (AP-9000F) and a detailed description of the issue ready.