1. Увод
This manual provides detailed instructions for the installation, operation, and maintenance of your DIGITEN Gas Fireplace Remote Control Kit, Model WTC401. This kit is designed to provide wireless control for millivolt valve gas fireplaces, offering ON/OFF, automatic thermostat, and timer functions for enhanced convenience and comfort.
2. Безбедносне информације
Please read all safety warnings and instructions carefully before installation and operation to prevent injury or property damage.
- Волtagе Ограничење: Do not use this remote-control system on applications with voltagе изнад 24 В АЦ/ДЦ и 1 amp current. Exceeding these limits can damage the unit and pose a safety hazard.
- Изложеност топлоти: The receiver unit must be installed away from high heat sources (above 130°F / 54°C) to ensure proper function and prevent damage.
- Ручно искључивање: For extended absences from home, it is recommended to manually turn off the fireplace at the gas valve for maximum safety.
- Професионална инсталација: Ако нисте сигурни у вези са било којим делом процеса инсталације, консултујте квалификованог техничара.
- Безбедност батерије: Always use the specified battery types and ensure correct polarity. Do not mix old and new batteries or different battery types. Dispose of used batteries responsibly.
3. Садржај пакета
Проверите да ли су све компоненте наведене у наставку укључене у ваш пакет:
Figure 3.1: Contents of the DIGITEN Gas Fireplace Remote Control Kit.
- Даљински управљач (предајник)
- Рецеивер Бок
- Wall Plate for Receiver
- Цоннецтион Вирес
- Монтажни завртњи
4. Производ је готовview
4.1 Даљински управљач (предајник)
The remote control features a large, backlit LCD screen for clear display of current room temperature, desired set temperature, operating mode, and timer status. It operates wirelessly with a signal range of up to 65 feet (20 meters).
Figure 4.1: Remote Control LCD Display and Button Functions.
- ЛЦД екран: Shows current room temperature, set temperature, temperature unit (°F/°C), timer, safety lock status, and battery low indicator.
- Дугме МОДЕ: Cycles through ON, AUTO, and OFF operating modes.
- Дугме ТАЈМЕР: Активира и подешава функцију тајмера.
- Стрелице горе/доле: Adjusts set temperature and timer values.
- Уграђени сензор: The remote control contains the temperature sensor for thermostat operation.
4.2 Пријемник
The receiver unit acts as a wireless switch for your fireplace. It connects directly to the millivolt valve and receives commands from the remote control. It features a manual ON/AUTO/OFF switch and a 'LEARN' button for pairing.
Figure 4.2: Receiver Box and Wall Plate.
- ON/AUTO/OFF Switch: Allows manual control of the fireplace directly from the receiver.
- Дугме НАУЧИ: Used to establish communication between the remote and receiver.
- Одељак за батерије: Houses 4 AA batteries for power.
5. Подешавање и инсталација
5.1 Инсталација батерије
Batteries are not included in the kit and must be purchased separately.
Figure 5.1: Battery requirements for the remote and receiver.
- даљински управљач: Requires 2 AAA batteries. Open the battery compartment on the back of the remote and insert the batteries, observing correct polarity.
- Пријемник: Requires 4 AA batteries. Open the battery compartment on the receiver box and insert the batteries, observing correct polarity.
5.2 Receiver Wiring to Millivolt Valve
This system is designed for millivolt gas valve systems. It functions as an on/off switch and connects to the TH and TH/TP terminals of your millivolt valve.
Figure 5.2: Connecting the receiver to the millivolt gas valve.
- Ensure the gas supply to the fireplace is turned off before beginning installation.
- Locate the millivolt valve on your gas fireplace. Identify the TH and TH/TP terminals.
- Connect the two wires from the receiver to the TH and TH/TP terminals of the millivolt valve. The connection is non-polarized, so the order of the wires does not matter.
- Mount the receiver box in a suitable location, either inside the fireplace control area or on a wall using the provided wall plate and screws. Ensure it is away from direct heat.
- Restore the gas supply to the fireplace.
Figure 5.3: Millivolt Gas Valve Terminals.
5.3 Упаривање даљинског управљача и пријемника
After installing batteries and wiring the receiver, you need to pair the remote control with the receiver.
- On the receiver unit, slide the switch to the 'ON' or 'AUTO' position.
- Press and hold the 'LEARN' button on the receiver until you hear a beep or see an indicator light flash (refer to receiver for specific indicator).
- Within 10 seconds, press any button on the remote control. The receiver will beep again or the light will stop flashing, indicating successful pairing.
- Test the connection by pressing the ON/OFF buttons on the remote. The fireplace should respond.
6. Упутство за употребу
6.1 Укључивање/искључивање
- Да бисте укључили: Press the 'MODE' button on the remote until 'ON' is displayed, or press the 'Up' arrow button.
- Да искључите: Press the 'MODE' button on the remote until 'OFF' is displayed, or press the 'Down' arrow button.
6.2 Избор режима
Press the 'MODE' button on the remote to cycle through the following operating modes:
- ОН режим: The fireplace will remain continuously on until manually turned off.
- ОФФ начин: The fireplace will remain continuously off.
- AUTO Mode (Thermostat): The fireplace will turn on and off automatically to maintain the desired set temperature. The remote's built-in sensor measures the room temperature.
6.3 Thermostat Function (AUTO Mode)
Figure 6.1: The remote control houses the temperature sensor.
- In AUTO mode, use the 'Up' and 'Down' arrow buttons to set your desired temperature. The remote will display both the current room temperature and the set temperature.
- To switch between Fahrenheit (°F) and Celsius (°C), refer to the remote control's specific instructions (usually a combination button press or a switch in the battery compartment).
- The fireplace will activate when the room temperature drops below the set temperature and deactivate when it reaches or exceeds the set temperature.
6.4 Функција тајмера
- Притисните дугме „ТАЈМЕР“ да бисте активирали тајмер.
- Use the 'Up' and 'Down' arrow buttons to set the desired duration for the fireplace to operate (e.g., 30 minutes, 1 hour).
- The fireplace will automatically turn off once the set time has elapsed.
6.5 Сигурносна брава за децу
The child safety lock prevents accidental activation of the fireplace.
Figure 6.2: Activating the Child Safety Lock.
- Да закључате: Press and hold the 'Up' arrow button and the 'TIMER' button simultaneously for a few seconds until a lock icon appears on the LCD screen.
- За откључавање: Press and hold the 'Up' arrow button and the 'TIMER' button simultaneously again until the lock icon disappears.
7. Одржавање
7.1 Замена батерије
When the battery low indicator appears on the remote control's LCD screen, replace the batteries within two weeks to ensure continuous operation.
- даљински управљач: Замените са 2 нове ААА батерије.
- Пријемник: Замените са 4 нове АА батерије.
- Always use fresh, high-quality alkaline batteries.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Fireplace does not respond to remote control. | Low batteries in remote or receiver. Даљински управљач и пријемник нису упарени. Receiver switch in 'OFF' position. Даљински управљач је ван домета. | Замените батерије у обе јединице. Re-pair the remote and receiver (Section 5.3). Slide receiver switch to 'ON' or 'AUTO'. Приближите се пријемнику (у кругу од 65 метара). |
| Fireplace turns on/off unexpectedly in AUTO mode. | Temperature sensor (in remote) affected by drafts or heat sources. Large temperature hysteresis (5°F/3°C). | Relocate the remote control to an area with stable ambient temperature, away from direct heat or cold drafts. Note that the system has a built-in 5°F (3°C) temperature differential before activating/deactivating. This is normal operation. |
| ЛЦД екран је туман или празан. | Ниске батерије у даљинском. | Замените батерије даљинског управљача. |
| Child safety lock cannot be disengaged. | Incorrect button combination or duration. | Ensure you are pressing and holding the 'Up' arrow and 'TIMER' buttons simultaneously for several seconds. |
| Пријемник се не укључује. | Слабе или неправилно инсталиране батерије. | Проверите поларитет батерија и замените их новим АА батеријама. |
9. Спецификације
Слика 9.1: Димензије производа.
| Феатуре | Детаљ |
|---|---|
| Број модела | ВТЦ401 |
| Димензије производа | 1.73 x 0.98 x 4.37 inches (Remote) |
| Тежина артикла | 8.6 ounces (Total Kit) |
| Power Supply (Remote) | 2 к ААА батерије (нису укључене) |
| Напајање (пријемник) | 4 к АА батерије (нису укључене) |
| Компатибилност | Millivolt valve gas fireplaces |
| Мак Волtagе/Струја | 24 Volts AC/DC, 1 Amp |
| Домет | До 65 стопе (20 метара) |
| Посебне карактеристике | Backlit LCD, Digital Display, Thermostat, Timer, Child Safety Lock |
10. Гаранција и подршка
DIGITEN provides a one-year warranty for any product quality problems. If you encounter any issues or require assistance, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webсајт за контакт информације за подршку.
We are committed to providing reliable products and personalized service to ensure your satisfaction.