1. Увод
The Lilytech ZL-6210A+ is a high-performance temperature controller designed for precise temperature management. Featuring a robust 30A relay output, it is suitable for a wide range of heating or cooling applications. This manual provides essential information for the safe installation, operation, and maintenance of your ZL-6210A+ controller.
Слика 1: Предња страна view of the ZL-6210A+ Temperature Controller, showing the display and control buttons.
2. Безбедносне информације
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.
- Електрична опасност: Овај уређај ради са високом јачином звукаtage (185-245Vac). Installation should only be performed by qualified personnel.
- Искључите напајање: Always disconnect power to the circuit before performing any wiring or maintenance.
- Правилно уземљење: Ensure the device is properly grounded according to local electrical codes.
- Услови животне средине: Do not expose the controller to excessive moisture, dust, or corrosive environments beyond its specified working conditions.
- Капацитет оптерећења: Do not exceed the maximum current rating of the relay (30A for R1, 5A for R2).
3. Спецификације
| Параметар | Валуе |
|---|---|
| Повер Суппли | 185 ~ 245Vac, 50/60Hz |
| Тип сензора | NTC (2 meters long) |
| Output Relay R1 | 30A / 250Vac (resistive load) |
| Output Relay R2 | 5A / 250Vac (resistive load) |
| Опсег подешавања | -40 ~ 120°Ц |
| Дисплеј Ранге | -40 ~ 130°Ц |
| Воркинг Енвиронмент | -10 ~ 45°C, 5 ~ 90%RH (non-condensing) |
| Димензије (Ш к В к Д) | 78 к 34.5 к 71 мм |
| Installation Drilling (W x H) | 71 к 29 мм |
| Цасе Материалс | ПЦ + АБС отпоран на ватру |
| Ниво заштите | ИП65 (само са предње стране) |
| Тежина артикла | 1.76 унци (приближно 50 г) |
NTC Sensor Selection
The ZL-6210A+ uses NTC sensors. Different sensor types are available, varying in seal material, wire length, resistance, and B-value. Ensure the correct sensor type is used for your application.
Figure 2: NTC Sensor Selection table, detailing specifications for Metal, TPE, and Water sealed sensors.
4. Инсталација
4.1 Монтажа
The ZL-6210A+ is designed for panel mounting. Create an opening in your panel with the dimensions of 71 mm (width) x 29 mm (height). Insert the controller into the opening and secure it using the provided clips.
4.2 Ожичење
Refer to the wiring diagrams below for proper connection. Ensure all connections are secure and comply with local electrical codes. The main power input is 185-245Vac. The primary temperature output (R1) is rated for 30A.
Слика 3: Задња страна view of the ZL-6210A+ showing the terminal block layout. Terminals 1-2 are for R1 Temp. Output, 3-6 for 220V~ power (L, N), and 7-10 for Alarm Input and Temp. Sensor.
Figure 4: Simplified wiring diagram. Connect power to terminals 5 (L) and 6 (N). Connect the temperature sensor to terminals 9 and 10. The main relay output (R1) is connected to terminals 1 and 2. An alarm input can be connected to terminals 7 and 8.
Прикључци терминала:
- КСНУМКС, КСНУМКС: R1 Temperature Output (30A / 250V~)
- КСНУМКС, КСНУМКС: (Not explicitly labeled in diagram, often for auxiliary functions or R2 if present)
- 5 (L), 6 (N): Power Supply Input (220V~)
- КСНУМКС, КСНУМКС: аларм ulaz
- КСНУМКС, КСНУМКС: Temperature Sensor Input (NTC)
5. Операција
The ZL-6210A+ features a digital display and control buttons for setting parameters. Specific operational details, including setting the desired temperature, hysteresis, and alarm functions, are typically accessed via a menu system. Refer to the detailed manual available from the manufacturer for complete programming instructions.
Слика 5: Унутрашњи view showing the digital display and buttons (S1, S2, S3, S4) used for parameter setting and navigation.
Основне функције:
- Приказ температуре: Приказује тренутно измерену температуру.
- Подешавање задате тачке: Allows users to set the desired target temperature.
- Избор режима: Typically allows selection between heating and cooling modes.
- Подешавања аларма: Configures high/low temperature alarms.
6. Одржавање
Regular maintenance ensures optimal performance and longevity of your temperature controller.
- Чишћење: Очистите предњу плочу меком, дamp крпа. Не користите абразивна средства за чишћење или раствараче. Уверите се да течност не уђе у уређај.
- Провера животне средине: Periodically inspect the installation environment to ensure it remains within the specified temperature and humidity ranges.
- Инспекција ожичења: Check all wiring connections periodically for tightness and signs of wear or corrosion.
- Sensor Condition: Ensure the temperature sensor is clean and free from damage.
КСНУМКС. Решавање проблема
If you encounter issues with your ZL-6210A+, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Контролер се не укључује | Нема напајања; Неправилно ожичење; Прегорели осигурач | Check power connections; Verify wiring against diagram; Check for internal fuse (if accessible, consult professional) |
| Нетачно очитавање температуре | Faulty sensor; Sensor not connected properly; Sensor placed incorrectly | Check sensor wiring; Replace sensor if damaged; Relocate sensor to a representative area |
| Output relay (R1) not switching | Temperature not within set range; Incorrect parameter settings; Faulty relay | Verify set point and hysteresis; Check operating mode (heating/cooling); Consult professional for relay replacement |
| Дисплеј приказује код грешке | Sensor error; Internal fault | Refer to the full manufacturer's manual for specific error code meanings and solutions. |
8. Гаранција и подршка
For warranty information, please refer to the terms provided by your retailer or the manufacturer at the time of purchase. For detailed technical support, additional documentation, or specific programming instructions, please visit the official Lilytech webсајту или контактирајте њихову корисничку службу.
A comprehensive manual can be found at: www.suzhoulily.com/pdf/ZL-62x0A(plus)_en_2.0d.pdf