Micsig MHO14-100 Tablet Oscilloscope with Multimeter User Manual

1. Увод

This manual provides detailed instructions for the safe and effective operation of your Micsig MHO14-100 Tablet Oscilloscope with Multimeter. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage. Keep this manual for future reference.

2. Шта је у кутији

Carefully unpack the contents and verify that all items listed below are present and in good condition. If any items are missing or damaged, please contact your vendor.

• Micsig MHO1 Oscilloscope x1
• Passive probes x4
• Multimeter pen x1 pair
• Адаптер за напајање к1
• Кабл за напајање к1
• Quick Guide Collection x1

3. Кључне карактеристике

• Built-in Multimeter: Features a 4½-digit multimeter for voltage, current, resistance, capacitance, diode, and continuity tests. This eliminates the need for a separate device and allows simultaneous oscilloscope and multimeter operation.
• Ultra-Portable & Slim Design: With a slim 3.1cm design, the MHO14-100 is designed for portability, fitting easily into backpacks for field diagnostics, lab analysis, or remote projects.
• Lab-Grade Accuracy: Equipped with a 12-bit ADC, 100MHz bandwidth, 4 analog channels, 1GSa/s real-time sampling, and 110Mpts memory depth for capturing subtle signal details.
• 8-инчни ХД екран осетљив на додир: An anti-glare 1280×800 display offers sharp visuals and responsive touch control. Users can switch between touch, button, or hybrid control modes.
• Max Protection & Power: Integrated 16000mAh lithium-ion battery provides extended runtime and supports over 1000 charge cycles. Power bank charging is supported for true field portability. A shock-absorbing rubber casing offers impact resistance and a non-slip grip.
• Remote Control & Storage: Supports control via SCPI commands, mobile apps (Android/iOS), and PC software. Includes HDMI output for large-screen analysis and segmented storage for efficient capture of multiple trigger events.

4. Подешавање

1. Распакивање: Carefully remove the oscilloscope and all accessories from the packaging. Inspect for any visible damage.
2. Пуњење батерије: Connect the provided power adapter to the oscilloscope's DC 12V input port and plug it into a power outlet. The device features a 16000mAh lithium-ion battery. Allow sufficient time for the battery to fully charge before initial use.
3. Укључивање/искључивање: Press and hold the power button located on the side or front panel to turn the device on or off.
4. Adjusting the Stand: The device includes a foldable hidden stand for stable support and easy viewing. Adjust it to your preferred angle.

5. Упутство за употребу

5.1 Basic Oscilloscope Operation

1. Повезивање сонди: Connect the passive probes to the desired analog input channels (CH1-CH4) on the front panel. Ensure a secure connection.
2. Укључено: Turn on the oscilloscope. The 8-inch HD touchscreen will display the main interface.
3. Улазни сигнал: Apply the signal you wish to measure to the connected probe.
4. Аутоматско подешавање: For quick initial setup, press the 'Auto Set' button. The oscilloscope will automatically adjust vertical, horizontal, and trigger settings to display a stable waveform.
5. Ручна подешавања: Use the dedicated knobs and touchscreen controls for fine-tuning.
   • Вертикалне контроле: Адјуст волtage scale (V/div) and position for each channel.
   • Хоризонталне контроле: Adjust time base (s/div) and horizontal position.
   • Контроле окидача: Set trigger level, mode (Edge, Pulse Width, Video, etc.), and source to stabilize the waveform.
6. мерења: Access the measurement menu to perform automatic measurements (e.g., Vpp, Vrms, Frequency, Period) or use cursors for manual measurements.

5.2 Multimeter Functionality

The MHO14-100 integrates a 4½-digit multimeter. To use the multimeter:

1. Промена режима: Select the multimeter function from the main menu or a dedicated button (if available).
2. Connecting Multimeter Pens: Connect the multimeter pens to the dedicated input jacks (COM, VΩmA, 10A) on the front panel, corresponding to the measurement type.
3. Select Measurement Type: Choose the desired measurement (Voltage, Current, Resistance, Capacitance, Diode, Continuity) on the screen.
4. Извршите мерење: Apply the multimeter pens to the circuit or component under test. The measurement will be displayed on the screen.

5.3 Напредне функције

• даљински управљач: The oscilloscope supports remote control via SCPI commands, mobile applications (Android/iOS), and PC software. Connect the device to a network via the LAN port or USB for remote access.
• ХДМИ излаз: Use the HDMI port to connect the oscilloscope to an external display for larger viewинг и анализа.
• Складиштење података: The device offers 110Mpts memory depth and segmented storage, allowing you to capture and analyze complex waveforms and multiple trigger events efficiently. Save waveforms, screenshots, and setup configurations to internal memory or a connected USB drive.

6. Одржавање

• Чишћење: Користите меку, суву крпу за чишћење уређаја. За тврдокорну прљавштину, благо дamp cloth with mild detergent can be used. Avoid abrasive cleaners or solvents.
• Одржавање батерије: To prolong battery life, avoid fully discharging the battery frequently. Store the device in a cool, dry place if not used for extended periods, and charge it periodically.
• Ажурирања софтвера: Проверите произвођача webсајт за доступна ажурирања фирмвера како би се осигурале оптималне перформансе и приступ новим функцијама.
• Калибрација сонде: Periodically check and calibrate your oscilloscope probes according to standard procedures to maintain measurement accuracy.

КСНУМКС. Решавање проблема

• Уређај се не укључује: Ensure the battery is charged or the power adapter is securely connected and receiving power.
• Без приказа таласног облика: Check probe connections, input signal presence, and trigger settings. Try using the 'Auto Set' function.
• Нестабилан таласни облик: Adjust the trigger level and trigger mode. Ensure the trigger source is correctly selected.
• Нетачна мерења: Verify probe compensation and calibration. Ensure correct measurement settings are selected for the multimeter.
• Екран осетљив на додир не реагује: Рестартујте уређај. Ако проблем и даље постоји, контактирајте подршку.

8. Спецификације

9. Гаранција и подршка

The Micsig MHO14-100 Tablet Oscilloscope is manufactured by XEAST. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official XEAST webсајт. Молимо вас да сачувате доказ о куповини за потребе гаранције.