Увод
This manual provides detailed instructions for the installation, operation, and maintenance of the Generic TS-FT007 Digital Water Tank Water Level Gauge. This ultrasonic liquid level gauge is designed to accurately monitor water levels in tanks and provide high and low-level alarms. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: Generic TS-FT007 Digital Water Tank Water Level Gauge unit.
Мере предострожности
- Уверите се да је напајање искључено пре инсталације или одржавања.
- Не излажите уређај екстремним температурама или директној сунчевој светлости током дужег периода.
- Избегавајте употребу абразивних средстава за чишћење на уређају.
- This device is rated IP65; however, avoid submerging it in water.
- Consult a qualified technician for any repairs beyond basic troubleshooting.
Садржај пакета
Проверите да ли су све ставке присутне у пакету:
- 1x TS-FT007 Digital Water Tank Water Level Gauge Unit
- 1x Ultrasonic Sensor Probe
- 1x Power Adapter (if included)
- 1x Упутство за употребу (овај документ)
- Монтажни прибор (вијци, анкери)
Сетуп
1. Инсталација сонде сензора
- Изаберите локацију: Choose a suitable location on the top of your water tank where the ultrasonic sensor can have a clear, unobstructed path to the water surface. Avoid areas with agitators, pipes, or other obstructions that could interfere with the ultrasonic signal.
- Монтажа: Securely mount the ultrasonic sensor probe using the provided mounting hardware. Ensure the probe is positioned vertically, pointing directly down towards the water surface.
- Кабловска веза: Connect the sensor probe cable to the main display unit. Ensure the connection is firm and secure.
2. Display Unit Placement
- Постављање у затвореном простору: Place the display unit indoors, away from direct sunlight, moisture, and extreme temperatures.
- Прикључак за напајање: Connect the power adapter to the display unit and plug it into a standard electrical outlet.
3. Initial Power-On and Calibration
- Once powered on, the unit will perform a self-test.
- Follow the on-screen prompts (if any) to set the tank height and other initial parameters. Refer to the "Operating" section for detailed parameter settings.
Упутство за употребу
1. Прикажи прекоview
The display unit shows the current water level, tank capacity percentage, and alarm status.
2. Подешавање параметара
- Tank Height: Притисните тастер "ПОСТАВИ" button to enter the settings menu. Use the "UP" и "DOWN" buttons to adjust the total height of your water tank. Confirm with "ПОСТАВИ".
- High Level Alarm: Navigate to the high-level alarm setting. Adjust the desired maximum water level percentage or distance from the top at which an alarm should trigger.
- Low Level Alarm: Navigate to the low-level alarm setting. Adjust the desired minimum water level percentage or distance from the bottom at which an alarm should trigger.
- Избор јединице: Select between metric (cm/m) or imperial (inches/feet) units for level display.
3. Функционалност аларма
When the water level reaches the set high or low alarm thresholds, the unit will emit an audible alert and/or display a visual indicator. To silence an audible alarm, press any button on the display unit. The visual indicator will remain until the water level returns to a normal range.
Одржавање
- Чишћење сензора: Periodically inspect the ultrasonic sensor probe for any dirt, debris, or mineral buildup. Gently clean the sensor surface with a soft, damp тканина. Немојте користити јаке хемикалије или абразивне материјале.
- Display Unit Cleaning: Wipe the display unit with a dry, soft cloth.
- Инспекција каблова: Regularly check all cables for signs of wear, damage, or loose connections.
- Замена батерије (ако је применљиво): If your unit uses backup batteries, replace them annually or when the low battery indicator appears.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема дисплеја/Уређај се не укључује | Нема струје, неисправан адаптер, лабава веза. | Проверите утичницу, уверите се да је адаптер добро прикључен, покушајте са другом утичницом. |
| Inaccurate water level readings | Sensor obstructed, incorrect tank height setting, sensor dirty. | Clear obstructions, verify tank height setting in menu, clean sensor probe. |
| Alarm not triggering | Alarm thresholds incorrectly set, alarm function disabled. | Review and adjust high/low alarm settings. Ensure alarm is enabled. |
| Intermittent readings | Loose sensor cable, interference, sensor partially obstructed. | Check sensor cable connection, ensure no strong electrical interference nearby, inspect sensor for partial obstructions. |
Спецификације
- Модел: ТС-ФТ007
- Врста мерења: Ултрасониц
- Опсег мерења: (Specific range, e.g., 0.2m - 15m, would be here if available)
- тачност: (Specific accuracy, e.g., ±1cm, would be here if available)
- Приказ: Дигитални ЛЦД
- Функције аларма: High and Low Water Level
- Заштита од уласка: IP65 (Sensor Probe)
- Напајање: (e.g., DC 5V, Power Adapter)
- Радна температура: (Specific range, e.g., -10°C to 60°C, would be here if available)
Note: Specific technical specifications such as measurement range, accuracy, and power supply details are typically found on the product packaging or a separate specification sheet. Please refer to those documents for precise values.
Информације о гаранцији
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Typically, the warranty covers defects in materials and workmanship under normal use. Damage resulting from misuse, unauthorized modification, or improper installation is not covered.
Корисничка подршка
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact your retailer or the manufacturer's customer support.
- Подршка на мрежи: Visit the manufacturer's official website (if known).
- Подршка путем е-поште: (Email address would be here if available)
- Телефонска подршка: (Phone number would be here if available)
When contacting support, please have your product model (TS-FT007) and purchase information ready.