1. Увод
This manual provides detailed instructions for the setup, operation, and maintenance of your AOOSTAR WTR MAX 8845HS MiniPC NAS. This device is designed for data storage, processing, and networking, powered by an AMD R7 PRO 8845HS processor. It features extensive storage options with 6x 3.5" SATA HDD slots and 5x M.2 2280 NVME slots, high-speed networking capabilities, and flexible expansion options.

Слика 1.1: Предња страна view of the AOOSTAR WTR MAX 8845HS MiniPC NAS, showcasing its drive bays and compact design.
2. Садржај пакета
Проверите да ли су све ставке присутне у пакету:
- 1x AOOSTAR WTR MAX 8845HS Desktop NAS Unit
- 1x HD кабл
- КСНУМКСк напајање
- 1x Упутство за употребу (овај документ)
3. Подешавање
3.1 Физички прекоview
Familiarize yourself with the ports and components of the AOOSTAR WTR MAX 8845HS.

Image 3.1: Rear panel connectivity, including dual Intel X710 10Gb SFP+ LAN ports, dual 2.5G LAN ports, USB4, OCuLink, HDMI, and other interfaces.
3.2 Installing the SATA Backplane
The SATA backplane allows for the installation of 3.5-inch hard drives. Follow these steps to install it:
- Carefully align the new SATA board with the designated slot inside the NAS chassis.
- Gently push the board into place until it is securely seated.
- Secure the backplane with any provided screws.
Video 3.2: Demonstration of how to properly install the WTR MAX SATA Backplane. This video guides you through the alignment and securing process.
3.3 Installing 3.5-inch HDDs
The AOOSTAR WTR MAX supports up to six 3.5-inch SATA HDDs. To install a hard drive:
- Open the drive bay latch for the desired slot.
- Slide the 3.5-inch HDD into the drive tray.
- Secure the HDD to the tray using the provided screws.
- Slide the tray with the HDD back into the NAS until it clicks into place.
Video 3.3: Short demonstration on how to properly install a 3.5-inch HDD into the drive bay.
3.4 Installing M.2 NVMe SSDs and DDR5 RAM
The NAS features five M.2 2280 NVMe slots (PCIe 4.0) and two DDR5 5600MHz RAM slots. For installation:
- Carefully open the chassis to access the motherboard.
- For M.2 SSDs, insert the drive into the slot at an angle and then push down to secure it with the retaining screw or clip.
- For DDR5 RAM, align the notch on the RAM stick with the slot key, insert firmly, and push down until the side clips engage.

Слика 3.4: Унутрашњи view of the NAS, highlighting the M.2 NVMe slots and the structure supporting the drive bays.
3.5 Повезивање периферних уређаја и напајања
- Connect your display(s) to the HDMI or USB4 ports.
- Connect network cables to the 2.5G LAN or 10Gb SFP+ ports.
- Connect any USB peripherals (keyboard, mouse) to the available USB ports.
- Connect the power supply to the DC port and then to a power outlet.
- Притисните дугме за напајање да бисте укључили уређај.
3.6 Initial Boot and Operating System Installation
As a barebone system, the AOOSTAR WTR MAX requires an operating system installation. It supports various OS options including Windows, Linux, and Android. Follow the standard installation procedures for your chosen operating system.
4. Операција
4.1 Конфигурација мреже
The device features dual Intel X710 10Gb SFP+ LAN ports and dual 2.5G LAN ports. These can be configured for link aggregation to achieve speeds up to 20Gbps, enhancing data transfer rates for network-attached storage and other applications.
4.2 Display Connectivity
The AOOSTAR WTR MAX supports triple-screen display output via USB4, HDMI 2.1, and PD1.4, allowing for multi-monitor setups with resolutions up to 4K 240Hz or 5120 x 2880.
4.3 AOOSTAR-NAS Control Software
Utilize the AOOSTAR-NAS screen control software for real-time monitoring of system parameters such as CPU, GPU, and RAM temperatures, usage, and network data metrics. The display is customizable to show preferred information.

Image 4.1: The front display panel of the NAS, showing real-time system monitoring data like CPU temperature and usage.
4.4 РАИД конфигурација
The NAS supports multiple RAID modes for data security and performance:
- РАИД 0: Data striping for increased performance.
- РАИД 1: Data mirroring for redundancy and safety.
- РАИД 5: Striping with parity for balanced performance and fault tolerance.
- РАИД 6: Striping with double parity for enhanced fault tolerance.
- РАИД 10: A combination of striping and mirroring for both performance and redundancy.
RAID 10, 6, and 5 support hybrid hard drive strategies for optimized storage.
4.5 OCuLink Expansion
The rear OCuLink interface (PCIe 4.0 x4) provides flexible expansion capabilities, allowing connection to external GPU docking stations or additional hard drive enclosures for increased performance or storage capacity.

Image 4.2: The OCuLink port enables flexible expansion with devices such as external GPU docks or additional hard drive enclosures.
5. Одржавање
5.1 Систем хлађења
The AOOSTAR WTR MAX features a dual cooling system, including a VC heat sink and system cooling fans, utilizing Glacier Pro 1.0 technology. This system is designed to maintain optimal operating temperatures even under heavy loads.

Image 5.1: Diagram illustrating the Glacier Pro 1.0 cooling system, featuring a VC cooler and multiple fans for efficient heat dissipation.
Video 5.2: A teardown video of the WTR MAX, providing insight into the internal components and cooling system, useful for understanding maintenance and upgrades.
5.2 Чишћење и нега
To ensure longevity and optimal performance, regularly clean the exterior of the NAS with a soft, dry cloth. Periodically check air vents for dust accumulation and clean them using compressed air. Ensure the device is powered off and unplugged before cleaning.
КСНУМКС. Решавање проблема
If you encounter issues with your AOOSTAR WTR MAX 8845HS, consider the following basic troubleshooting steps:
- Нема напајања: Проверите да ли је адаптер за напајање безбедно повезан и са уређајем и са исправном утичницом.
- Без приказа: Ensure the display cable (HDMI, USB4) is correctly connected to both the NAS and the monitor. Try a different cable or monitor if available.
- Проблеми са мрежном повезивањем: Check network cable connections. Verify router and network settings. Ensure network drivers are correctly installed in your operating system.
- Диск није откривен: Ensure hard drives and M.2 SSDs are properly seated and secured. Check power and data connections for SATA drives.
For persistent issues, refer to the AOOSTAR official support resources or contact customer service.
7. Спецификације
| Феатуре | Спецификација |
|---|---|
| Бранд | AOOSTAR |
| Назив модела | WTR MAX |
| ЦПУ модел | AMD Ryzen 7 PRO 8845HS |
| Брзина процесора | 3.8 GHz (Base), 5.1 GHz (Max Boost) |
| Грапхицс Цопроцессор | AMD Radeon 780M (12 cores, 2700MHz) |
| Технологија РАМ меморије | ДДР5 |
| Брзина меморије | 5600 МХз |
| Максимална величина РАМ меморије | 128 ГБ |
| Стораге Баис | 6x 3.5" SATA HDD, 5x M.2 2280 NVME (PCIe 4.0) |
| Умрежавање | 2x Intel X710 10Gb SFP+ LAN, 2x 2.5G LAN |
| Видео Оутпут | USB4, HDMI 2.1, PD1.4 (Triple-screen support) |
| Max Display Resolution | 5120 к 2880 |
| Портови за проширење | OCuLink (PCIe 4.0 x4), USB3.2 Gen2, USB3.2 Gen1, Type-C, TF card slot |
| Подршка за оперативни систем | Windows, Linux, Android (Barebone system) |
| Димензије | 25 к 24.5 к 20 ЦМ |
| Тежина | 4.5 КГ |
8. Гаранција и подршка
8.1 Информације о гаранцији
The AOOSTAR WTR MAX 8845HS MiniPC NAS comes with a limited warranty. For specific terms and conditions, please refer to the official AOOSTAR webсајту или контактирајте корисничку подршку.
8.2 Корисничка подршка
For technical assistance, warranty claims, or inquiries regarding the Windows 11 Pro key, please contact AOOSTAR customer service. You can find contact information on the official AOOSTAR webсајт: AOOSTAR Store