1. Увод
The AITEK ANB-BE1200P Pure Sine Wave Uninterruptible Power Supply (UPS) is designed to provide clean, stable, and fully protected power for sensitive electronic equipment. This 1200VA (700W) UPS utilizes Online Double Conversion technology, ensuring filtered power with zero transfer time. It is ideal for computers, workstations, network devices, security systems, and professional electronics.
This manual provides essential information for the safe and efficient use of your AITEK ANB-BE1200P UPS. Please read it thoroughly before installation and operation.
2. Безбедносне информације
WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.
- Не отварајте UPS уређајasinг. Унутра нема делова које корисник може сам да поправи. Сво сервисирање препустите квалификованом сервисном особљу.
- Do not operate the UPS in environments with excessive humidity or extreme temperatures.
- Обезбедите одговарајућу вентилацију око UPS-а. Не блокирајте вентилационе отворе.
- Прикључите УПС само на уземљену утичницу.
- Не повезујте уређаје који би могли преоптеретити UPS, као што су ласерски штампачи или грејачи.
- Disconnect the UPS from the power source before cleaning or performing any maintenance.
- Battery replacement should only be performed by qualified personnel using the correct battery type.
3. Садржај пакета
Проверите да ли су све ставке наведене у наставку укључене у ваш пакет:
- 1x AITEK ANB-BE1200P UPS (110V version)
- 1x Упутство за употребу (овај документ)
- 1x SB50 Cable (for battery connection)
4. Производ је готовview
The AITEK ANB-BE1200P UPS provides reliable power protection with a compact design and quiet operation. Key features include pure sine wave output, online double conversion technology, and a high power factor.
5. Подешавање
5.1 Постављање
- Поставите UPS на равну, стабилну површину.
- Ensure adequate clearance (at least 10 cm) around all ventilation openings for proper airflow.
- Avoid direct sunlight, heat sources, and areas with excessive dust or moisture.
5.2 Повезивање на напајање
- Connect the UPS power input cable to a grounded 110V AC wall outlet.
- The UPS will begin charging its internal batteries automatically. Allow the batteries to charge for at least 4 hours before initial use to ensure optimal runtime.
5.3 Повезивање уређаја
- Plug your electronic devices (computers, monitors, network equipment, etc.) into the output sockets on the rear panel of the UPS.
- Ensure the total power consumption of connected devices does not exceed the UPS's 700W capacity.
- For PC communication and monitoring, connect an RS-232 cable (not included) from the UPS to your computer.
6. Операција
6.1 Укључивање/искључивање
- За укључивање: Press and hold the power button on the front panel until the display illuminates and the UPS starts.
- За искључивање: Притисните и држите дугме за напајање док се екран не искључи.
6.2 Front Panel Display and Controls
The LCD display provides real-time information about the UPS status, input/output voltage, battery level, and load. Use the control buttons to navigate through display modes or mute alarms.
6.3 Online Double Conversion Mode
The ANB-BE1200P operates in Online Double Conversion mode, meaning your connected devices are continuously powered by the UPS's inverter, which is fed by the battery charger. This isolates your equipment from utility power fluctuations, providing a constant, clean power supply with zero transfer time during outagес.
7. Одржавање
7.1 Одржавање батерије
- Keep the UPS connected to AC power to ensure batteries remain fully charged.
- If the UPS is stored for an extended period, recharge it every three months to prevent battery degradation.
- Battery replacement should only be performed by qualified service personnel. Use only specified lead-acid batteries.
7.2 Чишћење
- Ensure the UPS is turned off and disconnected from the AC power outlet before cleaning.
- Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
- Keep ventilation openings free from dust and debris.
КСНУМКС. Решавање проблема
This section addresses common questions and issues you might encounter with your UPS.
- Q: What is a pure sine wave?
- A: A pure sine wave is the cleanest and safest form of electrical power, identical to the power supplied by the utility company. It is essential for sensitive electronics.
- Q: What is Online Double Conversion?
- A: This technology ensures that your equipment is continuously powered by the UPS's inverter, which is always active. This means there are no fluctuations or transfer times when the utility power fails, providing constant, stable power.
- Q: What is the maximum power capacity?
- О: Максимална излазна снага је 700В.
- П: Колико је времена потребно за пуњење батерија?
- A: The batteries reach 90% charge in approximately 4 hours.
- Q: Does it have PC communication?
- A: Yes, it features an RS-232 port for communication and monitoring with a PC.
9. Спецификације
| Феатуре | Спецификација |
|---|---|
| Бренд / модел | Aitek ANB-BE1200P |
| Капацитет | 1200VA (1.2 kVA) |
| Излазна снага | 700В |
| Оутпут Волtage | 110В |
| Вавеформ | Чисти синусни талас |
| Улазни волtagе Распон | 85В до 145В АЦ |
| Фреквенција | 60 Хз |
| Ефикасност | 85% (AC mode and battery mode) |
| Фактор снаге | ≥ 0.99 |
| Рецхарге Тиме | 4 сата до 90% |
| Ниво буке | <45 дБА |
| Портс | РС-232 |
| Димензије (Д к Ш к В) | 36 × 14.7 × 22 cm (14.17 x 5.79 x 8.66 inches) |
| Тежина | 8.5 кг (18.7 лбс) |
| Композиција | Metal, plastic, and electronic components |
| Састав батерије | Олово киселине |
10. Гаранција и подршка
The AITEK ANB-BE1200P UPS comes with a manufacturer's warranty of 90 days from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or the AITEK customer service department.