plplaaoo WT87B Bluetooth Digital Anemometer Instruction Manual

1. Увод

The plplaaoo WT87B Bluetooth Digital Anemometer is a high-precision handheld device designed for measuring wind speed and temperature. It features an LCD backlight display for clear readings in various lighting conditions, Bluetooth and USB connectivity for data transmission, and a durable ABS plastic construction suitable for outdoor use. This manual provides detailed instructions for the proper setup, operation, and maintenance of your anemometer.

2. Безбедносне информације

• Пажљиво прочитајте сва упутства пре употребе уређаја.
• Do not attempt to disassemble or modify the anemometer, as this may void the warranty and cause damage.
• Држите уређај даље од екстремних температура, директне сунчеве светлости и корозивних течности.
• Уверите се да је батерија правилно уметнута у складу са ознакама поларитета.
• Истрошене батерије одлажите одговорно у складу са локалним прописима.

3. Садржај пакета

Молимо вас да проверите пакет за следеће ставке:

• plplaaoo WT87B Digital Anemometer
• Цлотх Баг
• Хангинг Ропе
• УСБ кабл
• Упутство за употребу (овај документ)

Note: A 9V battery (6F22 type) is required but not included in the package.

4. Производ је готовview

The WT87B anemometer is designed for ease of use and accurate measurements. Below are key components and features:

Слика 4.1: Фронт view of the anemometer, highlighting the wind impeller and LCD display.

Слика 4.2: Одозго надоле view of the anemometer, illustrating the button layout for various functions.

Кључне карактеристике:

• High-precision wind speed measurement (0-30m/s)
• Real-time, average, maximum, and minimum wind speed readings
• LCD backlight display for readability
• Bluetooth and USB connectivity for data transmission
• Unit switching (m/s, km/h, ft/min, knots, mph)
• Функција задржавања података
• Функција ЛЕД светла

5. Подешавање

5.1 Инсталација батерије

1. Locate the rear power cover on the back of the anemometer.
2. Disassemble the rear power cover by sliding or unscrewing it.
3. Insert one 9V (6F22 type) battery into the battery compartment, ensuring correct polarity.
4. Close the power cover tightly.

Слика 5.1: Illustration of the anemometer, including a visual guide for battery installation and button functions.

6. Упутство за употребу

6.1 Укључивање/искључивање и позадинско осветљење

• To power on the device, press the red power button (ЛЕД button). The display will show the current ambient wind speed and temperature.
• To turn on the LCD backlight, press the power button again briefly.
• To power off, press and hold the red power button.

6.2 Wind Speed Measurement Modes

• Real-time Measurement: The device displays the current wind speed by default after power-on.
• Maximum/Minimum/Average Measurement: Притисните тастер UP/MIN/MAX button to cycle through maximum, minimum, and current wind speed display modes.
• Average Wind Speed: Притисните тастер VEL/AVG button to measure and display the average wind speed.

6.3 Пребацивање јединица

To switch between wind speed units (m/s, km/h, ft/min, knots, mph), press the UNIT/DOWN дугме.

6.4 Data Hold and Settings

• Притисните тастер СЕТ/ХОЛД key to enter the setting menu or to activate the data saving mode (data hold).
• When data hold is active, the displayed reading will be frozen. Press again to release.

6.5 Функција ЛЕД светла

Притисните тастер LIGHT/ENTER key to turn on the integrated LED light or to confirm a function within the settings menu.

6.6 Bluetooth & USB Connectivity

The anemometer supports seamless connection to a mobile phone via Bluetooth or to a computer via USB. This allows for stable and reliable data transmission. Utilize the companion app (if available for your mobile device) to monitor and analyze wind speed data with enhanced functionality.

7. Одржавање

• Чишћење: Користите меку, суву крпу за чишћење уређаја. Не користите абразивна средства за чишћење или раствараче.
• Складиштење: When not in use for extended periods, remove the battery to prevent leakage. Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Impeller Care: Ensure the wind impeller is free from dust, debris, or obstructions for accurate readings.

КСНУМКС. Решавање проблема

• Уређај се не укључује: Проверите да ли је батерија од 9 V правилно инсталирана и да ли је довољно напуњена. Замените батерију ако је потребно.
• Нетачна очитавања: Ensure the impeller is spinning freely and is not obstructed. Verify that the device is held in an open area, away from obstacles that could affect airflow.
• Bluetooth/USB connection issues: Ensure Bluetooth is enabled on your mobile device or that the USB cable is securely connected to your computer. Restart the anemometer and your connecting device if issues persist.
• Екран је затамњен или трепери: The battery may be low. Replace the 9V battery.

9. Спецификације

10. Информације о гаранцији

Specific warranty details for the plplaaoo WT87B Digital Anemometer are not provided in the product information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty terms and conditions.

11. Подршка

For technical assistance, troubleshooting, or further inquiries regarding your plplaaoo WT87B Digital Anemometer, please contact the seller or manufacturer through their official support channels. Refer to your purchase documentation for contact information.