Увод
This manual provides detailed instructions for the assembly, operation, and maintenance of your Tangkula Cantilever Umbrella Base with Wheels. This heavy-duty base is designed to provide stable support for offset hanging umbrellas in various outdoor settings. Please read these instructions carefully before use to ensure proper setup and safe operation.
Безбедносне информације
- Уверите се да су све компоненте добро причвршћене пре употребе.
- Do not overfill the base beyond its maximum weight capacity.
- Always check for stability, especially in windy conditions.
- Keep children and pets away from the umbrella base during assembly and movement.
- Use caution when moving the filled base due to its weight.
Садржај пакета
Проверите да ли су сви делови присутни пре почетка монтаже. Ако неки делови недостају или су оштећени, обратите се корисничкој подршци.
- Umbrella Base (HDPE material)
- Метална пречка
- 4 завртња за причвршћивање
- Water Inlet Spout Cap
- Drain Spout Cap
- Built-in Wheels (2)
- Grooved Handles (2)
Подешавање и монтажа
- Позиционирање базе: Place the umbrella base in your desired outdoor location. Ensure the surface is flat and stable.
Image: The Tangkula cantilever umbrella base positioned on a patio, supporting an umbrella. This image shows the base in its intended environment.
- Attaching the Umbrella Cross Base: The umbrella base is designed to work with offset hanging umbrellas that have a cross base. Position your umbrella's cross base onto the designated area of the Tangkula base.
Слика: Крупни план view of the umbrella base's top surface, highlighting the screw hole distances (4.7" x 4.7" x 6.3" diagonal) for securing an umbrella's cross base.
- Осигуравање кишобрана: Use the provided 4 fastening screws to securely attach your umbrella's cross base to the Tangkula umbrella base. Ensure all screws are tightened firmly.
Image: A diagram illustrating the four fastening screws and the integrated metal cross base design, ensuring a secure connection for the umbrella.
- Пуњење резервоара: Locate the water inlet spout on the top of the base. Open the cap and fill the reservoir with water, sand, or a mixture of both.
- Water only: up to 172 lbs
- Sand only: up to 276 lbs
- Water and Sand mixture: up to 345 lbs
Image: This image displays the water inlet and drain spouts on the base, along with visual indicators for maximum fill weights using water (172 lbs), sand (276 lbs), or a combination (345 lbs).
Упутство за употребу
- Померање базе: The base is equipped with 2 built-in flexible wheels and grooved handles for easy relocation.
- To move, tilt the base slightly using the grooved handles until the wheels engage with the ground.
- Roll the base to the desired new position.
- Gently lower the base back onto its flat surface to ensure stability.
Image: A person demonstrating the ease of moving the umbrella base by tilting it to engage the built-in wheels and utilizing the grooved handles.
- Осигуравање кишобрана: Always ensure your cantilever umbrella is properly secured to the base and that the base is adequately weighted for the size of your umbrella and expected weather conditions.
Одржавање
- Чишћење: Clean the HDPE material with mild soap and water. Avoid abrasive cleaners that may damage the surface.
- Пражњење: For winter storage or relocation, the base can be drained using the drain spout. Open the cap and allow the contents to empty.
- Складиштење: Store the base in a dry, protected area during off-season or extreme weather to prolong its lifespan.
- инспекција: Периодично проверавајте све завртње и спојеве како бисте били сигурни да су чврсто затегнути и безбедно причвршћени.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Основа кишобрана је нестабилна. | Insufficient weight in the reservoir; loose connections; uneven surface. | Ensure the reservoir is filled to maximum capacity (345 lbs with water/sand). Tighten all fastening screws. Move the base to a flat, level surface. |
| Тешкоће са померањем базе. | Wheels not fully engaged; base too heavy for current method. | Tilt the base further to ensure wheels are fully on the ground. If still difficult, consider draining some contents before moving, then refilling. |
| Water/sand leakage from the base. | Spout caps not securely closed; damage to the HDPE material. | Ensure both water inlet and drain spout caps are tightly sealed. Inspect the base for cracks or damage. If damaged, contact customer support. |
Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | B0GFNMP33R |
| Материјал | High-Strength HDPE |
| Maximum Fill Weight (Water & Sand) | 345 лбс |
| Maximum Fill Weight (Water only) | 172 лбс |
| Maximum Fill Weight (Sand only) | 276 лбс |
| Димензије артикла (Д к Ш к В) | 32 cm x 32 cm x 7.5 cm |
| Screw Hole Distance (L x W x Diagonal) | 4.7 cm x 4.7 cm x 6.3 cm |
| Карактеристике | Built-in Wheels, Grooved Handles, Sun-Protective, Water-Resistant, Fade-Resistant, Crack-Resistant |
| Обавезна монтажа | No (referring to the base itself, but attachment to umbrella is required) |
Image: A detailed diagram illustrating the overall dimensions of the umbrella base, including its length, width, and height.
Гаранција и подршка
For warranty information or product support, please refer to the documentation included with your purchase or contact Tangkula customer service directly. Keep your purchase receipt for warranty claims.
Контакт информације: Please visit the official Tangkula webсајт за најновије контакт информације.