Daytech Smart WiFi Temperature and Humidity Sensor User Manual

Увод

This manual provides detailed instructions for setting up, operating, and maintaining your Daytech Smart WiFi Temperature and Humidity Sensor. Please read this manual thoroughly before use to ensure proper functionality and safety.

Сетуп

Connecting the Hub to the Smart Life App

Before starting, ensure your mobile phone is connected to a 2.4GHz Wi-Fi network. 5GHz networks are not supported for initial pairing.

1. Connect the Hub to a power source using the provided USB cable.
2. On your mobile phone, ensure both Wi-Fi (2.4GHz) and Bluetooth are enabled.
3. Open the Smart Life App.
4. Tap the "+" icon in the upper-right corner of the app, then select "Add Device".
5. Press and hold the black reset button on the back of the Hub until its icon appears in the app.
6. Tap the Hub icon to proceed. Enter your 2.4GHz Wi-Fi network name and password, then tap "Next".
7. Wait for the connection to complete. Once successful, tap "Done".

Image: Visual guide for connecting the Smart Weather Station to the mobile application, showing each step from enabling Wi-Fi/Bluetooth to successful pairing.

Connecting Sensors to the Smart Life App

After connecting the hub, you can add individual sensors.

1. In the Smart Life App, tap the "+" icon in the lower-right corner of the main screen.
2. Remove the back cover of the sensor. Press and hold the black reset button inside the sensor until its icon appears on the app screen.
3. Tap "Save" to complete the sensor addition.
4. Repeat these steps for any additional sensors you wish to add.

Image: Illustration showing the main indoor meter and multiple outdoor/indoor sensors, highlighting the system's expandability to support up to 9 sensors.

Image: Diagram illustrating the 3-in-1 system components: Gateway, Display Screen, and Temperature & Humidity Sensor, working together to provide real-time weather reports.

Операција

Setting Temperature and Humidity Alarm Thresholds

You can set custom temperature and humidity ranges to receive instant alerts when conditions exceed your desired limits.

1. Ensure the Hub is plugged in. Tap "Alarm" at the bottom of the app page.
2. To set thresholds for the Hub: You will see "Smart Weather Station" in the upper left corner. Turn on the "Alarm switch" and drag the sliders to set your desired minimum and maximum temperature and humidity thresholds. Tap "Save" to complete.
3. To set thresholds for Sensor 1: Tap "Smart Weather Station" in the upper-left corner and select "Sensor 1". Turn on the "Alarm switch" and drag the sliders to set the desired temperature and humidity thresholds. Tap "Save".
4. To set thresholds for Sensor 2: Tap "Sensor 1" in the upper-left corner and select "Sensor 2". Turn on the "Alarm switch" and drag the sliders to set the desired temperature and humidity thresholds. Tap "Save".

Image: Screenshot of the app displaying customizable temperature and humidity alarm ranges, allowing users to set specific thresholds for alerts.

Image: A visual sequence demonstrating how the sensor detects a change, triggers an alert on the phone, and provides an easy-to-read display for quick checks.

Remote Monitoring and Data Export

Monitor temperature and humidity from anywhere, anytime, and access historical data.

• Праћење 24.: View historic statistics of temperature and humidity in the "Stat" page of the app.
• Извоз података: Export data to your email address for analysis.
• Паметна интеграција: Create linkage scenes with other Tuya smart devices. For example, automatically turn on an air conditioner if the indoor temperature exceeds 30°C, or activate a humidifier if humidity drops below 20%.

Image: Depicts a user checking temperature and humidity levels from their smartphone app while traveling, illustrating the 24/7 remote monitoring capability.

Image: Shows the app's statistics page with options to export data to email, allowing users to analyze past temperature and humidity trends.

Placement and Coverage

The compact design allows for versatile placement, and the system offers extensive coverage.

• Разноврстан пласман: Ideal for various locations such as reptile enclosures, attics, wine cellars, greenhouses, humidors, and RVs.
• Покривеност целе куће: Provides powerful signal coverage up to 426 feet (130 meters) for comprehensive monitoring.
• Употреба на отвореном: Sensors are IP65 waterproof, making them suitable for outdoor environments.

Слика: Изложба колажаasing the sensor's suitability for various environments, including wine cellars, greenhouses, humidors, and RVs.

Слика: Пресек view of a house demonstrating the 426ft (130m) remote range and placement of sensors for whole-home coverage, including an IP65 waterproof outdoor sensor.

Одржавање

Замена батерије

The smart temperature and humidity monitor is energy-efficient. When the battery power level of a sensor is low, the app will push an alert message to remind you to change the batteries.

• To replace batteries, remove the back cover of the sensor.
• Replace the old batteries with 4 new AAA batteries (included).
• Приликом уметања батерија пазите на исправан поларитет.
• Securely reattach the back cover.

Image: Highlights key features including IP65 waterproof rating, extended 2-year battery life, and convenient low battery alerts through the app.

Чишћење

To ensure accurate readings and prolong the life of your device:

• Wipe the device and sensors with a soft, dry cloth.
• Немојте користити абразивна средства за чишћење или раствараче.
• Avoid exposing the device to excessive moisture, except for the IP65-rated outdoor sensors.

Решавање проблема

Уобичајени проблеми и решења

• Уређај се не повезује на Wi-Fi: Ensure your router is broadcasting a 2.4GHz Wi-Fi signal. 5GHz networks are not compatible. Check that the device is within range of your router (recommended less than 32.8ft during pairing).
• Sensors not pairing: Make sure the hub is successfully connected to the app. Ensure batteries are correctly installed in the sensors and press the reset button until the sensor icon appears in the app.
• Нетачна очитавања: Ensure sensors are placed in appropriate locations, away from direct sunlight, heat sources, or extreme drafts. Allow some time for readings to stabilize after initial setup or relocation.
• Нема обавештења о апликацијама: Check your phone's notification settings for the Smart Life App to ensure alerts are enabled. Verify that alarm thresholds are correctly set in the app.

Спецификације

Слика: Детаљна view of the main display unit and sensors, highlighting their functions (e.g., WiFi signal, time, date, temperature/humidity display) and physical dimensions.

Гаранција и подршка

For warranty information, technical support, or any inquiries regarding your Daytech Smart WiFi Temperature and Humidity Sensor, please refer to the contact information provided on the product packaging or visit the official Daytech webсајту.