Sun Joe X20-SAW-4A-BLK
Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw Instruction Manual
Model: X20-SAW-4A-BLK
Brand: Sun Joe
Важне информације о безбедности
Always read and understand this manual before operating the Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.
- Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection, when operating the saw.
- Ensure the safety lock button is engaged to prevent accidental starts when the tool is not in use or during maintenance.
- Keep hands, hair, and loose clothing away from the chain and moving parts.
- Do not operate the saw in wet conditions or near flammable liquids or gases.
- Always maintain a firm grip with one hand on the handle and ensure stable footing.
- Only use the saw for its intended purpose: trimming branches, shrubs, and woody stems up to 5 inches thick.
- Држите децу и пролазнике даље од оперативног простора.
Шта је укључено
The Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw package includes the following components:

Слика 1: All components included in the Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw kit. This includes the pruning saw, 4.0Ah battery, charger, chain, guide bar, chain cover, oil bottle, wrench, screwdriver, safety glasses, and gloves.
- Sun Joe 20V ECOSHARP Cordless Handheld Pruning Saw
- 20В 4.0Ах литијум-јонска батерија
- Пуњач батерија
- 6-inch Cutting Chain
- Вођица од 5 инча
- Chain and Sprocket Cover
- Protective Bar Sheath
- Refillable Oil Bottle
- Вренцх
- Шрафцигер
- Заштитне наочаре
- Радне рукавице
- Упутство за употребу
Сетуп
1. Пуњење батерије
Before first use, fully charge the 20V 4.0Ah lithium-ion battery. Connect the charger to a standard power outlet and insert the battery. The indicator light on the charger will show the charging status. Refer to the charger's specific instructions for detailed charging procedures and times.
2. Installing the Chain and Guide Bar
- Ensure the battery is removed from the saw before installation.
- Remove the chain and sprocket cover using the provided wrench.
- Carefully place the chain around the sprocket and guide bar, ensuring the cutting edges are facing the correct direction.
- Reattach the chain and sprocket cover, but do not fully tighten the nuts yet.
- Adjust the chain tension using the tensioning screw until the chain is snug but can still be pulled freely around the guide bar by hand. There should be no slack on the underside of the guide bar.
- Once tensioned, fully tighten the nuts on the chain and sprocket cover.
3. Filling the Oil Reservoir (Self-Lubricating System)

Слика 2: The self-lubricating system ensures continuous chain lubrication during operation. The oil reservoir is visible on the top of the saw.
The saw features a self-lubricating system to ensure smooth operation and extend chain life. Fill the oil reservoir with appropriate bar and chain oil (not included) using the provided refillable oil bottle. Regularly check the oil level during use and refill as needed.
Упутство за употребу
1. Starting the Saw

Слика 3: The safety button lock must be pressed before the trigger can be engaged to start the saw.
- Ensure the battery is securely inserted into the saw.
- Grip the saw firmly with one hand.
- Press and hold the safety lock button (located near the trigger).
- While holding the safety lock button, squeeze the trigger to start the saw. Release the safety lock button once the saw is running.
- Да бисте зауставили тестеру, отпустите окидач.
2. Технике резања

Слика 4: The compact design allows for precise cutting of branches up to 5 inches in diameter.
- Always ensure stable footing and a clear work area.
- Position the saw so that the guide bar is perpendicular to the branch being cut.
- Allow the saw to reach full speed before engaging the chain with the wood.
- Apply light, consistent pressure. Do not force the saw through the wood; let the chain do the work.
- Be aware of kickback, especially when the tip of the guide bar contacts the wood.
- For larger branches, make an undercut first to prevent pinching and splintering.
- The saw is designed for branches up to 5 inches thick. Do not attempt to cut larger diameters.
Одржавање
1. Подмазивање ланца
Regularly check the oil level in the reservoir and refill with quality bar and chain oil. Proper lubrication is critical for chain performance and longevity. A visible oil film should be present on the chain during operation.
2. Оштрење и замена ланца
A dull chain will reduce cutting efficiency and increase strain on the motor. Sharpen the chain regularly or replace it when necessary. Refer to the chain manufacturer's guidelines for proper sharpening angles and techniques. Always ensure the battery is removed before performing any chain maintenance.
3. Чишћење и складиштење
- After each use, remove the battery and clean the saw. Use a brush or compressed air to remove sawdust, debris, and sap from the guide bar, chain, and motor vents.
- Обришите екстеријер огласомamp тканина. Немојте користити јаке хемикалије или абразивна средства за чишћење.
- Apply a light coat of oil to the chain and guide bar before storing to prevent rust.
- Store the saw in a dry, secure location, out of reach of children. Use the protective bar sheath to cover the guide bar and chain.
- Чувајте батерију на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Тестера се не покреће. | Battery not charged or improperly inserted. Safety lock not engaged. | Ensure battery is fully charged and correctly inserted. Press the safety lock button before squeezing the trigger. |
| Лоше перформансе сечења. | Туп ланац. Неправилна затегнутост ланца. Недовољно подмазивање. | Наоштрите или замените ланац. Подесите затегнутост ланца. Допуните резервоар за уље. |
| Saw stops during operation. | Заштита од преоптерећења је активирана. Батерија је празна. | Reduce cutting pressure. Allow motor to cool. Recharge or replace battery. |
| Прекомерне вибрације. | Лабав ланац. Оштећен ланац или водилица. | Проверите и подесите затегнутост ланца. Прегледајте ланац и вођицу да ли су оштећени и замените их ако је потребно. |
Спецификације
- Модел: X20-SAW-4A-BLK
- Бренд: Сун Јое
- Извор напајања: Напаја се батеријама (20В)
- Мотор: Четкасти мотор од 550 W
- Дужина водилице: 5 инча
- Cutting Chain Length: 6 инча
- Максимални пречник сечења: До 5 инча
- батерија: 20V 4.0Ah Lithium-Ion (included)
- Тежина: 3.8 фунти (само алат)
- Посебне карактеристике: Lightweight, Built-in Safety Features, Self-Lubricating System
- Димензије (Д к Ш к В): 16.3 cm x 5.4 cm x 8.7 cm
Гаранција и подршка
This Sun Joe product is covered by a limited warranty. For detailed warranty information, product registration, or technical support, please visit the official Sun Joe webсајт или контактирајте њихову корисничку службу. Сачувајте рачун као доказ о куповини.
Произвођач: Снов Јое
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.