LiebeWH HW-QB6 5-in-1 Wall Scanner Detector

1. Увод

The LiebeWH HW-QB6 is a versatile 5-in-1 wall scanner detector designed to accurately locate wood studs, metal objects (rebar, pipes, conduit), and live AC wires behind walls, floors, and ceilings. This device is an essential tool for home renovation projects, installation tasks, and general DIY work, providing critical information to prevent damage and ensure safety.

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your LiebeWH HW-QB6 wall scanner.

Слика 1: Предња страна view of the LiebeWH HW-QB6 Wall Scanner Detector, showing the LCD display and control buttons.

2. Безбедносне информације

WARNING: Read all safety warnings and instructions before using this device. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always assume live electrical wires are present behind walls. Exercise extreme caution when drilling or cutting.
• Do not rely solely on the detector to locate live AC wires. Always turn off power to the area you are working on at the circuit breaker before drilling or cutting.
• This device is intended for detecting objects behind common wall materials such as drywall, plywood, and concrete. Performance may vary with different materials or wall thicknesses.
• Keep the device dry and clean. Do not expose it to moisture or extreme temperatures.
• Не покушавајте да отворите или модификујете уређај. Унутра нема делова које корисник може сам да поправи.
• Одложите батерије одговорно у складу са локалним прописима.

3. Компоненте производа

The LiebeWH HW-QB6 wall scanner features an ergonomic design for comfortable handling and a clear LCD display for easy interpretation of results.

Figure 2: Close-up of the LCD display and control buttons, including Power, Mode Selection, and AC detection.

Кључне карактеристике:

• ЛЦД екран: Provides visual indications for detection mode, signal strength, battery level, and center indication.
• Дугме за напајање: Укључује/искључује уређај.
• Дугме за избор режима: Cycles through different detection modes (Wood, Metal, AC).
• Ергономска ручка: Designed for comfortable and secure grip during use.
• Област сензора: Located on the back of the device, this area must be flat against the wall for accurate scanning.

4. Подешавање

4.1 Инсталација батерије

1. Пронађите поклопац одељка за батерију на задњој страни уређаја.
2. Померите или откопчајте поклопац да бисте отворили одељак.
3. Insert one 9V (6F22) battery, ensuring the polarity (+/-) matches the diagram inside the compartment.
4. Добро затворите поклопац одељка за батерије.

Figure 3: Open battery compartment for 9V (6F22) battery installation.

4.2 Почетна калибрација

For accurate results, the device must be calibrated before each use or when changing scanning locations.

1. Притисните дугме за напајање да бисте укључили уређај.
2. Place the device flat against the wall surface where you intend to scan, ensuring there are no known studs, metal, or wires in that specific spot.
3. Press and hold the Mode Selection button (or the dedicated calibration button if present, refer to display for indication) until the calibration process is complete (usually indicated by a beep or a stable display reading).
4. The device is now calibrated and ready for use.

5. Упутство за употребу

The LiebeWH HW-QB6 offers multiple detection modes for various materials. Select the appropriate mode for your task.

5.1 Selecting a Detection Mode

Press the Mode Selection button to cycle through the available modes. The selected mode will be indicated on the LCD display.

• Wood Stud Scan: For locating wood studs and joists.
• Metal Scan: For detecting metal objects such as rebar, pipes, and metal conduit.
• AC Wire Scan: For identifying live unshielded AC electrical wires.

5.2 Scanning Procedure

1. Ensure the device is calibrated as described in Section 4.2.
2. Поставите уређај равно уз површину зида.
3. Slowly slide the device horizontally across the surface. Maintain constant contact with the wall.
4. Observe the LCD display for indications of detected objects.
5. When an object is detected, the signal strength indicator will increase, and an audible alert may sound. The "CENTER" indicator will illuminate when the device is directly over the center of the object.
6. Mark the edges and center of the detected object for accurate positioning.

Figure 4: Close-up of the LCD display showing a detected object with center indication and signal strength.

5.3 Interpreting the LCD Display

• Траке јачине сигнала: Indicate proximity to a detected object. More bars mean closer proximity.
• Индикатор ЦЕНТАР: Appears when the device is directly over the center of a stud or object.
• Икона режима: Displays the currently selected detection mode (e.g., wood icon, metal icon, AC lightning bolt icon).
• Индикатор батерије: Shows the current battery level. Replace batteries when low.
• Depth Indication (if applicable): Some models may show an approximate depth. Refer to the specific icons on your display.

6. Одржавање

• Чишћење: Обришите уређај меком, дamp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Складиштење: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
• Замена батерије: Replace the 9V battery when the low battery indicator appears on the LCD display.

КСНУМКС. Решавање проблема

8. Спецификације

• Модел: HW-QB6
• Режими детекције: Wood, Metal, AC Wire
• Извор напајања: 1 x 9V (6F22) Battery (not included)
• Димензије производа: Approximately 19L x 8W x 5H Centimetres
• Тежина: Приближно 205 г (без батерије)
• Радна температура: 0°Ц до 40°Ц (32°Ф до 104°Ф)
• Температура складиштења: -10°Ц до 50°Ц (14°Ф до 122°Ф)

9. Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact LiebeWH customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official LiebeWH webсајт или контактирајте њихове канале за подршку.