1. Увод
This manual provides essential instructions for the safe and efficient operation of your ACMER S1 6000mW Laser Engraver. Please read this manual thoroughly before use and retain it for future reference. The ACMER S1 is a versatile 2-in-1 laser engraver and cutter designed for precision work on various materials.
Безбедносне смернице
- Always wear protective eyewear when operating the laser engraver.
- Ensure proper ventilation in the work area to dissipate fumes and smoke.
- Никада не остављајте машину без надзора током рада.
- Keep flammable materials away from the laser path.
- Do not operate the machine if any components are damaged.
- Држите децу и кућне љубимце даље од оперативног простора.
2. Садржај пакета
Проверите да ли су све ставке наведене у наставку укључене у ваш пакет. Ако неке ставке недостају или су оштећене, обратите се корисничкој подршци.
- ACMER S1 Laser Engraver Unit (pre-assembled)
- Laser Module (6000mW model, featuring a 3500mW diode laser with 48W peak output)
- Повер Адаптер
- УСБ кабл
- Заштитне наочаре
- Sample Materials
- Кориснички приручник (овај документ)
3. Подешавање
The ACMER S1 is 99% pre-assembled for quick setup. Follow these steps to prepare your engraver for first use.
3.1 Инсталација ласерског модула
- Carefully unpack the laser module from its packaging.
- Align the laser module with the mounting bracket on the engraver's gantry.
- Secure the laser module using the provided screws. Ensure it is firmly attached.
- Connect the laser module cable to the designated port on the main unit.
This image displays the fully assembled ACMER S1 Laser Engraver, showing the main unit with the laser module securely in place on the gantry. This illustrates the completed setup of the hardware components.
3.2 Напајање и повезивање
- Connect the power adapter to the engraver's power input port.
- Укључите адаптер за напајање у одговарајућу електричну утичницу.
- Connect the USB cable from the engraver to your computer.
- Press the power button to turn on the engraver. The indicator light should illuminate.
4. Упутство за употребу
The ACMER S1 supports various software for engraving and cutting. This section covers general operation steps.
4.1 Software Installation and Setup
The ACMER S1 is compatible with ACMER Studio, LaserGRBL, and LightBurn. Download and install your preferred software from the official websites. Follow the software-specific instructions for driver installation and initial connection.
This image displays the ACMER Studio software interface, highlighting its AI Creation and Asset Library features. It shows how users can generate custom artwork and access ready-made projects, demonstrating the software's capabilities for design and project management.
This image illustrates the wide compatibility of the ACMER S1 laser engraver, showing it connected to both a laptop and a desktop computer. Icons for Windows, macOS, and Linux operating systems are displayed, along with logos for ACMER Studio, LaserGRBL, and LightBurn software, indicating broad support.
4.2 Постављање и фокусирање материјала
- Place the material to be engraved or cut onto the working area (130x130mm).
- Adjust the laser module height to achieve the correct focal length (2mm). Refer to the laser module's specific focusing mechanism.
4.3 Процес гравирања и сечења
- Учитајте свој дизајн file into the chosen software (e.g., ACMER Studio).
- Set engraving/cutting parameters (power, speed, passes) according to the material type. Refer to the software's material library or conduct test engravings.
- Initiate the engraving/cutting process from the software.
- Monitor the process closely and ensure safety precautions are maintained.
This image shows the ACMER S1 laser engraver actively working on a piece of wood, demonstrating the laser beam creating a detailed design. This illustrates the machine during an engraving task.
This image highlights the superior engraving precision of the ACMER S1 (0.04mm) compared to other devices (0.14mm). It features a detailed wolf head engraving, with the ACMER S1's output showing significantly finer lines and greater detail, emphasizing its ability to create intricate designs.
5. Одржавање
Regular maintenance ensures optimal performance and extends the lifespan of your ACMER S1 laser engraver.
5.1 Cleaning the Laser Lens
- Ensure the machine is powered off and disconnected from the power source.
- Gently clean the laser lens with a lint-free cloth and a small amount of isopropyl alcohol.
- Избегавајте да додирујете сочиво директно прстима.
5.2 Cleaning the Working Area
- Remove any debris or dust from the 130x130mm working area after each use.
- Use a soft brush or vacuum cleaner to clear away small particles.
5.3 Gantry and Rail Lubrication
- Periodically inspect the gantry and linear rails for smooth movement.
- Apply a small amount of machine lubricant to the rails if movement becomes stiff.
КСНУМКС. Решавање проблема
Погледајте овај одељак за уобичајене проблеме и њихова решења. Ако проблем и даље постоји, контактирајте корисничку подршку.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Ласер не пуца | Power cable loose, laser module not connected, software settings incorrect. | Check power connections. Ensure laser module cable is secure. Verify laser power settings in software. |
| Лош квалитет гравирања | Неправилан фокус, погрешна подешавања снаге/брзине, прљаво сочиво, проблеми са материјалом. | Adjust laser focus. Optimize power and speed settings for the material. Clean the laser lens. Use appropriate materials. |
| Машина се не повезује са рачунаром | USB cable faulty, drivers not installed, software port selection incorrect. | Try a different USB cable/port. Install necessary drivers. Select the correct COM port in your software. |
| Unexpected movement or noise | Loose belts, debris on rails, motor issues. | Inspect and tighten belts. Clean rails. Contact support if motor issues are suspected. |
7. Спецификације
Key technical specifications for the ACMER S1 6000mW Laser Engraver.
- Модел: ACMER S1
- Снага ласера: 3500mW diode laser with 48W peak output (marketed as 6000mW)
- таласна дужина: 455 ± 5нм
- Жижна даљина: 2мм
- Радна област: 130 к 130 мм
- Брзина гравирања: Up to 10,000 mm/min
- Repeatable Positioning Precision: 0.01 мм
- Укупне димензије: 250 к 250 к 162 мм
- Тежина артикла: Приближно 2 кг (4.11 фунте)
- Материјал: Industrial-grade aluminum alloy
- Компатибилност: Wood, bamboo, leather, plastic, PCB, aluminum oxide, ceramics, thin plywood, MDF, acrylic.
- Компатибилност софтвера: ACMER Studio, LaserGRBL, LightBurn
- Подржано File Формати: NC, DXF, BMP, JPG, PNG, etc.
- веза: USB / App / TF Card
8. Гаранција и подршка
For warranty information and technical support, please refer to the official ACMER webсајт или контактирајте продавца. Сачувајте рачун као доказ о куповини за потребе гаранције.
ACMER Official Webсајт: www.acmer.com (Напомена: Ово је резервисано место URL, молимо вас да замените стварним званичним webсајт ако је доступан.)