Увод
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your CADDXFPV Walksnail Ascent Lite VTX Kit. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance. This kit is designed for FPV drone and RC hobbyists seeking a high-definition digital video transmission system.
Шта је у кутији
Проверите да ли су све компоненте наведене у наставку укључене у ваш пакет:
- Ascent Lite VTX
- Lite Antenna
- VTX Upgrade Cable
- Lite VTX Power Cable
- Screws & Gasket
- Кориснички приручник (овај документ)
Figure 1: Included Components of the Ascent Lite VTX Kit.
Производ је завршенview
The CADDXFPV Walksnail Ascent Lite VTX Kit is a digital video transmission system designed for FPV applications, offering high-quality video and reliable performance.
Кључне карактеристике:
- HD 1080P/60FPS Video: Captures sharp, detailed footage with a 1/1.8-inch sensor.
- 147° ултра-широко поље од View (ФОВ): Provides expansive coverage for immersive FPV experiences.
- Могућност ноћног вида: Побољшана видљивост у условима слабог осветљења.
- Stable 3KM Digital Video Transmission: Ensures consistent, long-range signal reliability.
- Ултра-ниска латенција од 35 мс: Delivers fast, responsive visuals for precise control.
- Компактан и лаган дизајн: Weighs only 6g, minimizing impact on drone performance.
- Широка компатибилност: Integrates with F4/F7/H7 flight controllers and firmware like Betaflight, INAV, and ArduPilot via a 4-pin UART connection.
Figure 2: Wide 147° FOV and 1080P/60FPS HD Video Capture.
Figure 3: Enhanced Night Vision Performance.
Figure 4: 3km Range and 35ms Low Latency Transmission.
Figure 5: Ultra-Lightweight 6g Design.
Figure 6: Versatile FPV Applications.
Упутства за подешавање
1. Wiring the VTX
Connect the Ascent Lite VTX to your flight controller using the provided VTX Power Cable and VTX Upgrade Cable. Ensure correct polarity and pin assignments as shown in the wiring diagram below.
- Power (3V~12.6V): Connect to a suitable power source on your flight controller.
- Power GND: Connect to ground on your flight controller.
- UART RX (Connects to Flight Controller TX): За комуникацију података.
- UART TX (Connects to Flight Controller RX): За комуникацију података.
- USB-DP, USB-DN, USB-GND, USB-5V: For VTX upgrades and configuration via USB.
Figure 7: Ascent Lite VTX Wiring Diagram.
2. Инсталација антене
Securely attach the Lite Antenna to the VTX. Ensure the connection is firm to prevent signal loss during flight.
3. Монтажа
Mount the VTX and camera securely on your FPV drone or RC vehicle using the provided screws and gasket. Ensure the camera has a clear line of sight and is protected from impacts.
Упутство за употребу
1. Укључите напајање
After completing the wiring and mounting, connect the battery to your drone. The VTX will power on, and the indicator light will show its status.
2. Pairing with Goggles
To establish a video link, you need to pair the Ascent Lite VTX with compatible FPV goggles (e.g., Walksnail Ascent Goggles).
- Connect the VTX and goggles to their respective power supplies.
- Press the linking button on the VTX. The VTX indicator light will flash green, and a status icon will appear on the goggle screen.
- Press the linking button on the goggles. The goggle indicator light will flash green.
- Once pairing is successful, the VTX indicator turns solid green, and the goggle screen will display the video feed.
Одржавање
To ensure the longevity and optimal performance of your Ascent Lite VTX Kit, follow these maintenance guidelines:
- Чишћење: Keep the VTX and camera lens clean from dust and debris. Use a soft, dry cloth for cleaning. Avoid harsh chemicals.
- Инспекције: Regularly check all cable connections for wear or damage. Ensure the antenna is securely attached.
- Ажурирања фирмвера: Periodically check the CADDXFPV official website for firmware updates. Keeping your VTX firmware current can improve performance and add new features. Use the provided VTX Upgrade Cable for updates.
- Складиштење: Store the kit in a dry, cool environment away from direct sunlight and extreme temperatures when not in use.
Решавање проблема
If you encounter issues with your Ascent Lite VTX Kit, refer to the following common problems and solutions:
- Нема видео сигнала:
- Check all power connections to the VTX and goggles.
- Ensure the VTX and goggles are properly paired.
- Verify the antenna is securely connected to the VTX.
- Confirm that the camera cable is correctly attached to the VTX.
- Лош квалитет видеа/сметње:
- Check for physical obstructions between the VTX and goggles.
- Ensure the antenna is not damaged or bent.
- Избегавајте рад у близини јаких извора електромагнетних сметњи.
- Consider changing the channel if available and supported by your goggles.
- VTX Not Powering On:
- Verify the power input voltagе је унутар наведеног опсега (3В~12.6В).
- Проверите да ли има кратких спојева или неправилних ожичења.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | ЦАДДКСФПВ |
| Назив модела | Ascent Lite Kit |
| Број модела | WN13-4S09B-1-US |
| Видео Ресолутион | КСНУМКСП / КСНУМКСФПС |
| Поље оф View (ФОВ) | 147° |
| Величина сензора | 1/1.8 инча |
| Латенција | 35мс |
| Распон преноса | До 3км |
| Тежина артикла | 9.07 g (Total kit, VTX is 6g) |
| Item Dimensions (VTX) | 0.93 x 0.93 x 0.59 инча (приближно 23.6 x 23.6 x 15 мм) |
| Материјал кућишта | Пластика |
| Компатибилни уређаји | Walksnail Ascent systems |
Figure 8: Physical Dimensions of the Ascent Lite VTX Components.
Компатибилност
The Ascent Lite Kit is designed for specific compatibility to ensure optimal performance:
- Directly Compatible: Walksnail Ascent Goggles, FPV Monitors (requires HDMI input).
- Компатибилност система: Designed exclusively for use with Ascent systems.
- Flight Controller Compatibility: Integrates with F4/F7/H7 flight controllers and firmware such as Betaflight, INAV, and ArduPilot via a 4-pin UART connection.
- Not Directly Compatible: Avatar Goggles L. It does not directly support Avatar or other third-party FPV systems, but can be used with them when paired with the Ascent VRX.
Figure 9: Ascent Lite VTX Kit Compatibility Overview.
Гаранција и подршка
Информације о гаранцији:
The CADDXFPV Walksnail Ascent Lite VTX Kit comes with a 1-годишња гаранција од датума куповине. Ова гаранција покрива производне недостатке при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.
Корисничка подршка:
For technical assistance, troubleshooting, or warranty inquiries, please visit the official CADDXFPV website or contact their customer support. You can often find FAQs, firmware downloads, and contact information on their support pages.
Онлине ресурси: CADDXFPV Official Webсајту