Увод
This manual provides detailed instructions for the installation, operation, and maintenance of your new 11LED LED Strip Backlight Bar. This product is designed as a replacement backlight for various 32-inch television models. Please read this manual thoroughly before installation to ensure proper function and safety.
Безбедносне информације
- Always disconnect power to the television before attempting any installation or repair.
- LED strips contain small electronic components. Handle with care to avoid damage.
- Wear anti-static gloves or use proper grounding techniques to prevent electrostatic discharge (ESD) damage.
- Овај производ није водоотпоран. Избегавајте излагање влази.
- Ако нисте сигурни у вези са било којим кораком, консултујте квалификованог техничара.
Садржај пакета
Each package typically contains:
- LED Backlight Strips (quantity as per order, e.g., 2 pcs/lot for 1 TV)
- Pre-applied double-sided adhesive tape on each strip.
Спецификације
| Феатуре | Спецификација |
|---|---|
| Врста ставке | Strip (LED Backlight) |
| Бранд Наме | beented |
| Number of LEDs per strip | 11 ЛЕД диоде |
| Дужина траке | 575мм |
| Номинал Волtage (per LED) | 3V |
| Извор напајања | DC |
| Просечан живот (сати) | 100,000 |
| Луминоус Флук | <60 |
| Водоотпоран | бр |
| Цертифицатион | CE |
| Порекло | континентална Кина |
| Компатибилни модели телевизора | VESTEL 32 inch NDV REV1.1 LC32LD145K, 32D1334DB, VES315WNDL-01, VES315WNDS-2D-R02, 32 HA5000, VESTEL 32 inch REV0.2 VES315WNDS-01, 32HXC01U, 32D1333DB, Toshiba 32L3863DG, 17DLB32NER1, Panasonic TX-32E302B, LT-32C670, LT-32C666, LT-32C672, LT-32C690, LT-32C896, Hitachi 32HE1000, DLED32265HD, DLED32167HDDVD, LG INNOTEK 32 NDV REV0.0, SVV315A38, SVV315A39, VES315WNDB-2D-N01, N02, N03, N04, N11, N12, N21 |
Подешавање и инсталација
Replacing TV backlight strips requires careful handling and some technical knowledge. Proceed with caution.
- Припремите радни простор: Ensure you have a clean, well-lit, and static-free environment. Gather necessary tools (screwdrivers, pry tools, anti-static mat/wrist strap).
- Искључите напајање: Unplug the TV from the power outlet and disconnect all external cables.
- Disassemble TV: Carefully remove the TV back cover, stand, and any internal components (e.g., mainboard, power supply board, speakers) that obstruct access to the display panel. Document each step with photos if possible to aid reassembly.
- Remove Display Panel: With extreme care, remove the LCD panel and diffuser layers. These components are fragile. Place them on a soft, clean surface, face down.
- Access Backlight Area: Once the display layers are removed, you will see the old LED backlight strips.
- Remove Old Strips: Gently disconnect the power connectors from the old LED strips. Carefully peel off the old strips from the TV chassis. Note their exact positioning.
- Install New Strips:
- Ensure the new strips match the length and LED count of the original strips.
- The new LED strips come with pre-applied double-sided tape. Peel off the protective backing.
- Align each new strip precisely in the position of the old one and firmly press it down to ensure good adhesion.
- Connect the power connectors to the new LED strips.
Figure 4: New LED strips with pre-applied double-sided tape for easy installation. - Тест функционалност: Before reassembling the entire TV, temporarily connect the power and turn on the TV to verify that the new backlights are working correctly. Immediately disconnect power after testing.
- Поново саставите телевизор: Carefully reassemble the TV by reversing the disassembly steps. Ensure all connectors are securely attached and screws are tightened appropriately.
Упутство за употребу
These LED backlight strips are replacement components for your television's internal lighting system. Their operation is integrated with your TV's normal functions. Once installed correctly, they will illuminate when the TV is powered on and dim/turn off with the TV's backlight settings.
- Укључивање/искључивање: The LED strips will turn on and off automatically with your television.
- Контрола осветљења: Any backlight brightness adjustments made through your TV's picture settings will control these LED strips.
Одржавање
The LED backlight strips are designed for long-term, maintenance-free operation once installed. However, general care for your television will help prolong their lifespan.
- Чишћење: Do not attempt to clean the LED strips directly. If the TV is disassembled for other reasons, gently dust the area with a soft, dry, anti-static cloth.
- Окружење: Ensure the TV operates in a well-ventilated area to prevent overheating, which can reduce LED lifespan.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| No backlight after installation (TV has sound, but no picture) |
|
|
| Uneven brightness or dark spots |
|
|
| Позадинско осветљење трепери |
|
|
Кориснички савети
- Проверите компатибилност: Always double-check the model numbers and specifications of your existing LED strips against the replacement strips before purchase and installation. Compare the length, number of LEDs, and connector type.
- Нежно руковање: The LED strips and TV display components are delicate. Handle them with extreme care to avoid bending, scratching, or breaking.
- Организујте шрафове: Use a magnetic mat or small containers to keep track of different types and sizes of screws during disassembly.
- чистоћа: Dust and fingerprints on diffuser layers can cause visible imperfections on the screen. Ensure all internal components are clean before reassembly.
Гаранција и подршка
This product is tested before shipment to ensure quality. For specific warranty information, please refer to the seller's terms and conditions at the time of purchase. For technical support or further assistance, please contact the seller directly through the platform where the purchase was made.
